Instructions for JANOME models including: 202-464-008, Bias Tape Guide and Belt Loop Folder, 202-464-008 Bias Tape Guide and Belt Loop Folder, Belt Loop Folder, Loop Folder, Folder

JANOME BULLETIN - Bias Tape Guide and Belt Loop Folder

15 sept. 2021 — This attachment can be used in two ways: as a “Bias Tape Guide" that can guide bias tape (single fold) and sew it on to knit fabric, and as a “Belt Loop ...

JANOME BULLETIN

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 320.42KB

Document Document

JANOME BULLETIN
For CoverPro Models
Bias Tape Guide and Belt Loop Folder

This attachment can be used in two ways:

as a "Bias Tape Guide" that can guide

St itch pattern:

bias tape (single fold) and sew it on to

To p cover stitch Wide 6 mm C over stitch Wide 6 mm

knit fabric, and as a "Belt Loop Folder" *C o verPro 900CPX:

that can make belt loops from fabric tape. C over stitch Wide 5 mm

This attachment is useful for creating

various types of sewing work.

Part No. 202-464-008

Poi nt 1 Bias Tape Guide

Poi nt 1 Belt Loop Folder

Attach the attachment to the 2 holes on the front right of the CoverPro Models with the attachment screws (standard accessories).

Attach the attachment to the 2 holes on the front left of the CoverPro Models with the attachment screws (standard accessories).

Set the attachment properly to the machine as shown above.

Set the attachment properly to the machine as shown above.

Poi nt 2

Single fold ½" (12.7 mm) wide bias Poi nt 2 tape can be easily attached to knit fabric for decoration

Instead of bias tape, can also use ribbons of around the same width. Enjoy creating decorative knit works!

/16" (11 mm) wide belt loops can be easily made from 1" (25 mm) wide strips of fabric

De corate your work!
* It is easier to use with the Extra Wide Table #795812008 (Optional Item)
Ti ps How to adjust Bias Tape Guide on the CoverPro Models

* Medium-heavy fabrics (10 oz denim or chino cloth, etc.) are recommended
After making a long belt loop, cut it to the appropriate length for each piece.
* Fold back the edge of the 1" (25mm) fabric tape to form a ¼" (6mm) fold and iron it.
Ti ps How to adjust Belt Loop Folder on the CoverPro Models

If the seam line seems out of alignment, adjust the Bias Tape Guide position by loosening the attachment screws.
JTM-1078 15 September 2021

If the seam line seems out of alignment, adjust the Belt Loop Folder position by loosening the attachment screws.