Cool-Stunt Twist Truck 1:18 User Manual

About the Stunt Twist Truck

The Cool-Stunt Twist Truck, model 1:18, offers two modes of operation: racing and climbing. It utilizes 2.4G remote control technology for versatile control, including forward, backward, left/right sideway movement, left/right rotation, twisting, and transformation. It also features light & music, intelligent programming, and auto demo functions, controllable via the remote controller or a watch controller.

Key Components:

1. Truck Body
2. Power Switch
3. Tires
4. Light
5. Battery Compartment

Operation Tips:

Operation Environment: Do not use on public roads or streets to avoid traffic hazards. Avoid use in crowded places or around people or animals to prevent personal injury or property loss. Do not touch or stop the wheels while they are rotating. Do not use in the rain or run over puddles, as this may cause failures. Avoid touching the motor during or immediately after operation, as it may be hot.
When the product is not in use, remove the batteries from the remote control vehicle and launcher.

List of Original Accessories

The package includes:

Stunt Twist Truck x1
Remote Controller x1
Watch Controller x1 (Includes 1 button battery; additional batteries may be required for the remote control version)
Lithium Battery x1
USB Charging Cable x1
Screwdriver x1
User Manual x1

Note: Please check all accessories and their quantities carefully. If any items are missing, please provide proof of purchase and contact the seller for replacement.

About the Remote Controller

Watch Controller

The watch controller requires a button battery (CR2032 3V, non-rechargeable) for operation. The included battery is for the watch controller only. The remote control version requires an additional purchase of batteries.

Indicator Lights:

Red Indicator: Power on indicator.
Green Indicator: Pairing process indicator (lights up at startup and flashes during pairing).
Blue Indicator: Low voltage indicator (flashes when battery is low).

Controls:

Power Switch: Short press to power on; long press for 3 seconds to power off.
Function Button: Short press to switch between rotation and lateral movement modes. Long press for auto demo (rotation mode is default at startup).

Note: The watch controller will automatically power off after 3 minutes of inactivity.

Remote Controller

The remote controller features:

1. Antenna
2. Indicator Light
3. Switch Button
4. Forward Button
5. Backward Button
6. Left Rotation/Sideway Control
7. Right Rotation/Sideway Control
8. Mode Switch Button (Switches between left/right rotation default and lateral movement modes)
9. Twist and Transfer Button
10. Sound Switch Button
11. Programming/Demo Button (Short press for programming, long press for demo)
12. Battery Compartment

Button Batteries for Watch Controller

The watch controller uses one CR2032 3V button battery. To install, extract the screws using the provided screwdriver to remove the battery cover.

Battery Installation for the Remote Controller

Open the battery cover of the remote controller using a Phillips screwdriver. Install two AA alkaline batteries, ensuring the poles are aligned correctly. Additional batteries are required for purchase.

Note:

Ensure correct battery pole alignment.
Do not mix old and new batteries.
Do not mix different types of batteries.

Pair the Remote Controller with the RC Truck

Pair the Watch Controller with the RC Truck

First, power on the watch controller. When its indicators flash slowly, power on the RC truck. The controller's indicators will change from slow flashing to solid, indicating successful pairing.

Pair the Remote Controller with the RC Truck

Power on the remote controller. When its indicator flashes slowly, power on the RC truck. A "click" sound and the red indicator turning off signify standby mode and successful pairing.

Charge fro RC Truck Battery

Follow these steps to charge the RC truck's battery:

Unscrew the buckle as shown in the diagram, then open the battery cover to remove the batteries from the RC truck's battery compartment.
Connect the USB charger connector to the battery connector, ensuring correct pole alignment. Plug the USB cable into a computer interface. The LED light will turn on during charging and off upon completion. A full charge takes approximately 90-120 minutes, providing 20-25 minutes of playtime.
After charging, insert the batteries back into the compartment and connect them to the circuit board, ensuring correct pole alignment.

Note:

This product is suitable for children aged 8 and above. Minors require adult supervision.
Exercise caution with electronic products to prevent electric shock.
Do not disassemble or modify the product without authorization, as this may lead to malfunction.

Operating Steps

Follow these steps to operate the RC truck:

Power on the remote control truck and ensure it is stable. Slowly toggle the throttle joystick on the remote controller (refer to Diagram 1) to test forward and backward movement.
Place the remote control truck on the ground. Slowly toggle the rudder joystick on the remote controller (refer to Diagram 2) to check if the wheels rotate correctly.

Diagram 1: Shows a hand tilting a remote controller's joystick forward for 'Forward' and backward for 'Backward' movement.

Diagram 2: Shows a hand tilting a remote controller's joystick left for 'Left Rotation' and right for 'Right Rotation'.

Play with Remote Controller

1. Watch Controller

(The remote control version requires additional purchase)

Forward & Backward

Tilt your fist forward to move the truck forward. Tilt your fist backward to move the truck backward.

Left and Right Sideway

(Short Press the Function Button to Switch to Lateral Movement Mode)

Tilt your fist horizontally to the left to move the truck laterally to the left. Tilt your fist horizontally to the right to move the truck laterally to the right. A short press of the function button switches between movement modes.

45° Left and Right Forward

Tilt your fist forward and to the left to move forward at a 45° angle to the left. Tilt your fist forward and to the right to move forward at a 45° angle to the right.

Auto Demo

Press the function button to enable the auto demo mode.

2. Remote Controller

Forward & Backward

Press the forward or backward button on the remote controller to move the truck accordingly.

Left/Right Rotation

Press the left or right rotation button on the remote controller to make the truck rotate to the left or right.

Left/Right Sideway

Press the sideway/rotation button on the remote controller to switch to Lateral Mode (which is the default mode at startup). Then, press the left/right sideway button to move the truck to the left or right.

Twist & Transform

When you level up your arms, the truck's main body ascends vertically to transform into Climbing Mode. When you level down your arms, the main body descends vertically to transform into Racing Mode.

Sound Switch

Press the sound switch button to turn the sound on or off. Press again to toggle the state.

Programming and Auto Demo

Press the programming button to add commands, supporting up to 15 combined actions including music, water boom/blaster launch, spray, and auto demo. Press the button again after programming to demonstrate the command combo one by one.

Maintenance

Follow these maintenance steps to keep your RC truck in good condition:

1. Remove the battery from the remote control tank when it is not in use.
2. Wipe off any sand, mud, or dust from the truck.
3. Apply anti-rust oil to the external metal parts (sold separately) if required.
4. Place the remote control tank and the RC vehicle separately for storage when they are not in use.

Battery Storage

Proper battery storage is crucial for longevity:

1. For long-term storage, do not fully charge the lithium battery. This helps prevent passivation and slows down self-discharge.
2. Store the lithium battery in a dry indoor space with an appropriate temperature, ideally between 10°C and 30°C.
3. To maintain battery activity and performance, conduct a charge cycle every three months.

Troubleshooting

Problems	Reasons	Solutions
Wheels cannot spin	ON/OFF switch not turned on Low battery	Turn the switch to ON. Replace with new batteries or charge the batteries.
Fail to pair	Low voltage	Repeat the pairing steps.
Suddenly stop running	Low voltage	Replace with new batteries or charge the batteries.
Remote controller's indicators flash	Low voltage	Replace with new batteries.
Moves slowly	Low voltage	Replace with new batteries.
RC vehicle remains still or moving some distances	Out of control range	Use within control range (up to 30 meters for remote controller and 20 meters for watch controller).

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.