Paulmann Mac LED Wire System

Safety Instructions

Please follow these safety instructions before and during installation:

• Refer to safety instructions numbered: 1, 2, 3, 4, 5, 6, 7, 8, 11, 12, 19, 20, 22, 23, 24, 26, 28, 33, 34.
• Ensure the power is off before starting.
• ⚠️ [Electrical safety symbol]

Product Identification

Article Numbers (Art.-Nr.):

• 944.20
• 944.21
• 944.22
• 944.23
• 944.24
• 944.25

(+MA 0326) PTL 07/22

Installation Guide

Step A: Preparation

Diagram A displays the luminaire components and safety instructions. It indicates the 'off' state [Off] and shows the main body and mounting parts.

Step B: Mounting Bracket Installation

Diagram B shows attaching a mounting bracket to a surface using screws and a screwdriver [Tool]. It highlights the 'off' state [Off].

Step C: Attaching Luminaire to Bracket

Diagram C illustrates attaching the luminaire to the bracket with an upward motion [Up]. A screwdriver [Tool] is shown.

Step D: Electrical Connection

Diagram D details the electrical connection for 230V. It includes a warning ⚠️ and shows correct ✔️ and incorrect ❌ connection indicators.

Step E: Securing the Luminaire

Diagram E shows a part of the luminaire clicking into place [Click].

Step F: Attaching Wires and Clips

Diagram F demonstrates attaching wire clips and connecting wires to the luminaire.

Step G: Connecting Multiple Luminaires

Diagram G illustrates connecting multiple luminaires using clips and wires in sequence.

Step H: Suspending the Luminaire

Diagram H shows suspending the luminaire using cables, with downward tension indicated [Down].

Step I: Wiring Multiple Luminaires

Diagram I depicts the wiring layout for connecting multiple luminaires in series.

Step J: Assembling the Main Wire System

Diagram J shows the assembly of the main wire system, including the central unit and attachment points.

Step K: Final Assembly and Power On

Diagram K shows the completed installation of multiple luminaires on the wire system, including the power connection [Power] and 'on' indicator [On].

Component Replaceability

The following information details the replaceability of light sources and operating devices:

• Light Source (1) / Operating Device (4): Can be replaced by the end user without permanent damage to the luminaire.
• Light Source (2) / Operating Device (5): Can be replaced by a qualified electrician without permanent damage to the luminaire.
• Light Source (3) / Operating Device (6): Not replaceable. The luminaire must be replaced.

Energy Efficiency

This product contains a light source with an energy efficiency class as indicated by the labels on page 1 (e.g., A++, A, F).

Disposal Information

This product should not be disposed of in household waste. It can be returned to public collection points for waste disposal. Batteries and accumulators, as well as lamps that can be removed without damaging the old appliance, must be separated before disposal. Retailers are obligated to take back old appliances free of charge under § 17 (1) and (2) of the German Electrical and Electronic Equipment Act (ElektroG). End users are responsible for deleting personal data from old appliances before disposal.