StarTech.com | IT Pro's Trusted Source for Connectivity Accessories
Under-Desk Keyboard Tray, Adjustable - Sit-Stand Workstations | Display Mounting and Mobility | StarTech.comStarTech.com SupportStarTech.com Warranty Policy
User Guide for StarTech com models including: 1075885366 Under Desk Keyboard Tray, 1075885366, Under Desk Keyboard Tray, Desk Keyboard Tray, Keyboard Tray, Tray
KEYBOARD-TRAY-CLAMP1 - Startech.com Under Desk Keyboard Tray, Clamp On Keyboard Holder, Up To 12kg/26.5lb, Height Adjustable, Ergonomic Sliding Keyboard Drawer - Sliding Keyboard Tray Offers 3 Heights (3.9/4.7/5.5in) - This Black Keyboard Drawer Extends Up To 8.5" And The Front Is Curved For Comfort - The Clamp-on Keyboard Tray Supports Up To 26.5lb - The Under Desk Keyboard Tray Area Is 27.5x12.2in | DirectDial.com Canada
StarTech.com Under Desk Keyboard Tray, Clamp on Keyboard Holder, Up to 12kg/26.5lb, Height Adjustable, Ergonomic Sliding Keyboard Drawer - antonline.com
StarTech.com Keyboard Tray KEYBOARD-TRAY-CLAMP1: Keyboard Trays/Drawers - COLAMCO.com
File Info : application/pdf, 2 Pages, 586.84KB
DocumentDocumentQuick-Start Guide Desk Clamp Keyboard Tray Product Diagram (KEYBOARD-TRAY-CLAMP1) 1 2 3 4 5 Component 1 Desk Clamp, Left 2 Keyboard Tray 3 Desk Clamp, Right 4 Clamp Knob 5 Height Adjustment L Bracket Function · Attach the Keyboard Tray to the Desk · Place a keyboard and a mouse on the Keyboard Tray · Attach the Keyboard Tray to the Desk · Turn by hand to secure the Clamp to the Desk · Adjust the height between the Desk and the Keyboard Tray · Attach the Keyboard Tray to the Desk Clamp Requirements For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.startech.com/KEYBOARD-TRAY-CLAMP1 · Phillips Head Screwdriver Installation WARNING! Do not exceed the weight capacity of this product. Overloading this product might result in injury or property damage. This product can support the following weight: up to 11.8 kg (26 lbs). Ensure the mounted Keyboard Tray is properly secured to the Desk before use. Attach the Desk Clamp to the Height Adjustment L Brackets 1. Determine the desired height between the Desk and the Keyboard Tray: 100, 120, or 140 mm (3.9, 4.7, or 5.5 in). Each row of holes on the Height Adjustment L Bracket are spaced 20 mm apart. The row of holes, located closest to the bend of the Height Adjustment L Brackets, provides the minimum height adjustment setting of 100 mm (3.9 in). 2. Secure the Height Adjustment L Bracket to the Desk Clamps using the Height Adjustment Screws (x2 shorter screws) and tighten using a Phillips Head Screwdriver to complete the first Desk Clamp Assembly (Figure 1). Package Contents · Keyboard Tray x 1 · Height Adjustment Screws x 5 · Tray Mounting Screws x 5 · Height Adjustments L Brackets x 2 · Desk Clamp Left x 1 · Desk Clamp Right x 1 · Quick-star Guide x1 Figure 1 3. Repeat steps 2 and 3 to install the second Desk Clamp Assembly Attach the Desk Clamp Assemblies to the Keyboard Tray 1. Flip the Keyboard Tray upside down and align the mounting holes located on To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support Manual Revision: January 28, 2022 3:27 PM either side of the Keyboard Tray with the bottom of the Desk Clamp Assembly. (Figure 2). Figure 2 2. Secure the Desk Clamp Assembly to the Keyboard Tray using the Tray Mounting Screws (x2) and tighten using a Phillips Head Screwdriver. 3. Repeat steps 2 and 3 to attach the second Desk Clamp Assembly. This completes the Keyboard Tray Assembly. Attach the Keyboard Tray Assembly to the Desk 1. Open the Desk Clamps rotating the Clamp Knobs counterclockwise. The Desk Clamps can accommodate Desks measuring up to 59 mm (2.3 in) thick. 2. Slide the Desk Clamps over the edge of the Desk. 3. Tighten the Desk Clamps by rotating the Clamp Knobs clockwise. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders. PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries. Warranty Information This product is backed by a 2-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. StarTech.com Ltd. 45 Artisans Crescent London, Ontario N5V 5E9 Canada StarTech.com LLP 4490 South Hamilton Road Groveport, Ohio 43125 U.S.A. StarTech.com Ltd. Unit B, Pinnacle 15 Gowerton Road Brackmills, Northampton NN4 7BW United Kingdom StarTech.com Ltd. Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands FR: startech.com/fr DE: startech.com/de ES: startech.com/es NL: startech.com/nl IT: startech.com/it JP: startech.com/jp