STEVAL-16GZMAI Data Brief
VD16GZ S-Board: Hardware MIPI CSI-2 kit for the evaluation and integration of VD16GZ image sensor
Features
- Comprehensive hardware kit including: Sensor board with VD16GZ image sensor and FFC output connector.
- M12 lens holder screwed on the board.
- Default nonglued lens for user focus adjustment or replacement with other compatible lenses.
- Ribbon cable for direct connection to embedded processing boards.
- Highly versatile kit: Flexibility to focus the provided lens, replace it with other M12 or smaller lenses, and use on embedded platforms or PCs (with EVK Main kit).
- Instant integration onto embedded processing platforms: Native MIPI CSI-2 output and I²C communication interfaces. FFC connector and cable for plug-and-play connection.
- Linux drivers available for free download on st.com for instant software integration.
- Ready for sensor evaluation on PC: Connect to the generic EVK Main kit for USB-based PC evaluation.
- Evaluation software GUI for PC available for free download on st.com.
Description
The VD16GZ S-Board is a comprehensive and versatile hardware kit designed for evaluating and integrating the VD16GZ image sensor. It provides all necessary hardware components, from electronics to optics, to facilitate thorough product evaluation or direct integration into a system.
The kit comprises a sensor board featuring the VD16GZ image sensor with an FFC output connector, an M12 lens holder, a default nonglued lens, and a ribbon cable. The FFC connector and cable enable instantaneous integration with embedded processing platforms through plug-and-play connectivity. Compatible Linux drivers are available for download on st.com, ensuring seamless software integration.
The VD16GZ S-Board's architecture offers significant flexibility for customization. The included nonglued lens can be focused to user requirements or replaced with a different lens. The M12 lens holder supports a wide range of M12 or smaller off-the-shelf lenses. The standard FFC connector allows for the use of cables with various lengths and pinouts to suit specific setups.
For PC-based sensor evaluation, the VD16GZ S-Board can be connected to ST's generic EVK Main hardware, transforming it into a USB solution. A complementary evaluation software GUI for PCs is also available for free download on st.com.
Order Code: STEVAL-16GZMAI1
Description: VD16GZ S-Board hardware kit
Main Technical Specifications
| Category | Item | Parameter | Specification |
|---|---|---|---|
| Imaging | Image sensor | Sensor feature | VD16GZ |
| Resolution | 1.53 MP - 1124 x 1364 | ||
| Aspect ratio | 5:6 | ||
| Chroma | RGB-IR 4x4 | ||
| Shutter type | Global shutter | ||
| Pixel size | 2.61 μm | ||
| Electronics | Board output | Embedded features | Refer to VD16GZ documentation |
| Connector type | FFC | ||
| Pinout | 22 pins (1) | ||
| Connector reference | FH12-24S-0.5SH(55) by Hirose | ||
| Cable | Image output format | MIPI CSI-2 (1 or 2 lanes) (2) | |
| Image data format | RAW8 - RAW10 | ||
| Control interface | I²C | ||
| Mechanics | Overall | Cable pinout | 22 pins (3) |
| Cable reference | 687722050002 by Würth | ||
| Board | Total dimension - L x H x W | 30 x 35 x 28 mm | |
| Board dimension - L x H x W | 30 x 35 x 8 mm | ||
| Lens holder | Holder diameter: 12 mm, Holder height: 20 mm | ||
| Cable | Cable length: 10 cm | ||
| Optics | Default lens in the kit | Lens reference | AB02816MG by Alaud Optical |
| Aperture | F/1.6 | ||
| Optical format | 1/2.7" | ||
| Field of view | 110° (H) | 58° (V) | 113° (D) | ||
| Focal length | 2.8 mm | ||
| Depth of focus | 28 cm to infinite | ||
| Filter | Clear | ||
| Optics | Recommended specifications for using a different lens | Lens mount | M12 (native) or smaller (with adapter) |
| Lens thread | P 0.5 | ||
| Optical format (minimum) | 1/4" - 4.61 mm | ||
| Resolution - H x V (minimum) | 1124 x 1364 | ||
| Pixel array size - H x V (minimum) | 2.93 x 3.56 mm | ||
| Pixel size (maximum) | 2.61 μm | ||
| Optics | Chief ray angle [CRA] | 30° at 4.61 mm (4) | |
| Optics | Back focal length [BFL] (maximum) | 13 mm |
Notes:
- For detailed pinout, refer to the CAD resources available on the hardware kit webpage.
- To get USB output, the VD16GZ S-Board must be connected to the EVK Main kit by ST.
- Other pinouts (ex: 15 pins) are possible by plugging other off-the-shelf cable adaptors available from various providers.
- The CRA of the VD16GZ image sensor evolves linearly from 0° in the center to 30° on the edges (4.61 mm diagonal).
Revision History
| Date | Version | Changes |
|---|---|---|
| 23-Jun-2025 | 1 | Initial release |
Important Notice
STMicroelectronics NV and its subsidiaries reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgment.
Purchasers are solely responsible for the choice, selection, and use of ST products, and ST assumes no liability for application assistance or the design of purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2025 STMicroelectronics - All rights reserved
