FASS Titanium Signature Series Plus Installation Manual

Product Overview

This document provides detailed installation instructions for the FASS Titanium Signature Series Plus fuel system. Designed for Duramax 2500 and 3500 standard pickup trucks (2015-2016), this system is available for models ND-TSP-C12-100G (100 GPH) and ND-TSP-C12-165G (165 GPH), operating at 8-10 PSI.

FASS Diesel Fuel Systems, a division of Diesel Performance Products, Inc., emphasizes high-quality, American-made components. Note that Cab and Chassis models may require modifications.

A lifetime warranty is available, subject to specific registration and purchase conditions.

Important Guidelines & Warranty

• Read all instructions before installation.
• Secure the vehicle and wear safety glasses.
• Verify serial numbers and inspect components.
• Installation recommendations are guidelines; use judgment considering vehicle accessories.
• FASS recommends installation by a VIP FASS dealer for optimal results.
• Warranty requires product registration and proof of purchase from an authorized dealer within 30 days.
• Warranty may be void if purchased below advertised pricing or from unauthorized dealers.

For technical support, contact Diesel Performance Products, Inc. at 636-433-5410 or techsupport@FASSride.com. More information is available at www.fassride.com.

Installation Steps Overview

The installation process includes:

1. Install Electrical Harness
2. Prep the FASS System
3. Mount the FASS System
4. Install Fuel Lines
5. Review Installation

Proper priming and leak checks are critical post-installation.