Page 1: Engine and Carburetor Assembly Parts
This section displays an exploded view diagram of the engine and carburetor assembly for the MTD TB6042XP 4-cycle trimmer, along with a detailed list of replacement parts. The diagram visually represents the arrangement of components, with numbered callouts corresponding to the items listed below.
| Item | Part No. | Description |
|---|---|---|
| 1 | 753-06084 | Aircleaner Assembly (includes 2 & 3) |
| 2 | 753-06085 | Air Filter |
| 3 | 753-06939 | Screw |
| 4 | 791-181751 | Carburetor O-Ring |
| 5 | 753-06083 | Carburetor Assembly w/ Fuel Lines |
| 6 | 791-181709 | Carburetor Gasket |
| 7 | 753-06082 | Carburetor Baffle |
| 8 | 791-181003 | Screw |
| 9 | 753-05904 | Insulator |
| 10 | 753-05673 | Insulator Gasket |
| 11 | 753-05248 | Nut |
| 12 | 753-06940 | Engine Cover |
| 13 | 791-181025 | Screw |
| 14 | 753-05901 | Valve Cover |
| 15 | 753-05902 | Valve O-Ring |
| 16 | 753-05910 | Cylinder O-Ring |
| 17 | 753-05784 | Spark Plug |
| 18 | 753-06941 | Throttle Cable |
| 19 | 753-06334 | Muffler Assembly |
| 20 | 753-05244 | Muffler Gasket |
| 21 | 753-05246 | Muffler Bolt |
| 22 | 753-05907 | Module Assembly |
| 23 | 753-06167 | Lead Wires |
| 24 | 753-05400 | Oil Plug Assembly |
| 25 | 753-06087 | Oil Fill Tube Assembly |
| 26 | 753-05377 | Screw |
| 27 | 753-06493 | Flywheel |
| 28 | 753-05814 | Spacer |
| 29 | 791-182396 | Clutch Washer |
| 30 | 753-05860 | Clutch Assembly |
| 31 | 753-06335 | Clutch Cover Assembly |
| 32 | 753-05377 | Screw |
| 33 | 791-182519 | Anti-rotation Screw |
| 34 | 753-04291 | Clamp Screw & Nut |
| 35 | 753-06093 | Fuel Tank (includes 36) |
| 36 | 753-05289 | Fuel Cap |
| 37 | 753-05259 | Fuel Tank Pad |
| 38 | 753-06091 | Pawl Assembly |
| 39 | 753-06104 | Electric Start Adapter |
| 40 | 753-06942 | Starter Cover Assembly |
| 41 | 753-04595 | Screw |
| 42 | 753-06101 | Muffler Shield |
| 43 | 753-06122 | Carburetor Heat Shield |
| 44 | 753-06938 | Insulator |
| * | 753-06494 | Short Block Assembly |
Part Number 769-07315 P00 Issued 11/11
Page 2: Drive Shaft and Cutting Head Assembly Parts
This section displays an exploded view diagram of the drive shaft, gearbox, and cutting head assembly for the MTD TB6042XP 4-cycle trimmer, along with a detailed list of replacement parts. The diagram visually represents the arrangement of components, with numbered callouts corresponding to the items listed below.
| Item | Part No. | Description |
|---|---|---|
| 1 | 753-06887 | Throttle Housing Assembly (includes 2-5) |
| 2 | 753-06888 | Throttle Trigger |
| 3 | 753-05007 | Spring |
| 4 | 753-05171 | Throttle Lock-out |
| 5 | 791-182405 | Switch |
| 6 | 753-06889 | Upper Drive Shaft Housing Assembly |
| 7 | 753-06689 | D-Handle Assembly (includes 8) |
| 8 | 753-06040 | Bolt |
| 9 | 753-06886 | Split Boom Coupler (includes 10) |
| 10 | 753-05698 | Coupler Anti-Rotation Screw |
| 11 | 753-06587 | Lower Drive Shaft Housing Assembly (includes 12) |
| 12 | 791-182193 | Gearbox |
| 13 | 753-05820 | Shield Assembly (includes 14) |
| 14 | 753-05821 | Blade Assembly |
| 15 | 753-06125 | Shield Mounting Screw & Nut |
| 16 | 753-05267 | Lower Flexible Drive Shaft |
| 17 | 791-182195 | Gearbox Mounting Hardware |
| 18 | 791-182519 | Anti-Rotation Screw |
| 19 | 791-182196 | Blade Driver |
| 20 | 753-04348 | Palnut |
| 21 | 796-06890 | Cutting Head Assembly |
Issued 11/11
