Marvel Technology 360 Photobooth Product Specification (V1.3)

Manufacturer: Marvel Technology (China) Co., Ltd

Catalogue

Tablet Holder*1
Lantern Remote Control*1
Phone Holder(1)*2
Metal Hose*2
Phone Holder(2)*2
Fixed Bracket*3
Selfie Telescopic Rod*1
Angle Bracket*1
Metal Bracket*1
LED Aperture*1
Remote Shooting*1
Lamp Strip*1
AC-AD Adapter*1
Motor Controller*1 (Model CZ7136, Power supply: DC 12-24V, MotorA: DC12-24V 4A, Sound nouiation Frequency: 315MHz)
Remote Control*1
Fixed Screw*2
5V Adapter (for Lamp Strip)*1
Angle Adjuster*1
Documentation(1)*1 (Owner's Manual, Remote Shutter for iOS/Android)
Documentation(2)*1
Stage (with logo)*1
Foot Cup*8
Portable Bag*1
Money Gun*1
Trolley*1
M6 Screw*16
Trolley Wheel*4
M4&M6 Hexagon Wrench

Take the Stage out of the package and screw in the Foot cups to adjust it parallel to the ground.
Install the angle adjuster and lock it with a screw.
Install the Selfie Telescopic Rod and lock it with a Fixed Screw.
Stick the Lamp Strip.
Connect the AC-AD Adapter and Motor Controller.
Install LED Aperture.
Install Fixed Bracket.
Assemble the mobile phone bracket.
Install other Holders and Brackets. The rest parts can be combined freely.

Install suitable batteries for all remote controls.
Power up the AC-AD adapter.
Plug the two USB (LED Aperture & Lamp Strip) into the power bank and 5V power adapter.

For the safety of users, do not jump on the stage.
Do not let the edge of the stage bear too much weight; distribute the weight evenly on the stage.
The stage shall be leveled by rotating the foot cups before use.
Do not deliberately stop the rotating rod.
Do not install heavy objects on the rotating rod.