Govee Glide Hexagon Pro Light Panels User Manual

Caution

• This light panel is ideally used on smooth surfaces (e.g., glass, wood); not suitable for uneven, bumpy or wet surfaces (e.g., brick, stucco, etc).
• Clean and ensure the surface is totally dry before sticking the light panel on.
• When installing the light panel, press its central point against the wall for more than 30 seconds to maximize adhesion.

Safety Instructions

• The light panel is not waterproof. Avoid exposing it to splashing or dripping water.
• The operating temperature should be within -10°C to 40°C (14°F to 104°F).
• The light panel's internal light source cannot be replaced. If it breaks, it must be replaced.
• Do not allow children to install the light panel alone.
• Avoid placing the light panel near heat sources.
• Do not install the light panel with a dimming driver.
• Avoid placing the light panel near potentially dangerous sources (e.g., candles, liquid-filled objects).

Introduction

Thank you for choosing Govee Glide Hexagon Pro Light Panels. With its 3D lighting effects, this innovative light will bring you a brand-new lighting experience. It allows you to design the panel layout as you'd like to decorate your room while enjoying smarter home decor.

What You Get

At a Glance

Diagram Description: The diagram shows a hexagonal light panel connected to a control box via a linking cable. The panel has numbered connection points (1-5) and a slot for an adhesive tape. A mounting plate attaches to the back of the panel. The control box has a microphone (labeled "Mic") and a control button (labeled "Control Button").

Note: Ensure the mic is facing up during use.

Pairing Your Device with Govee Home App

What you need: A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

Pairing instructions

1. Download Govee Home App from the App Store (iOS) or Google Play (Android).
2. Open the app, tap the "+" icon in the top right corner and search for "H6066".
3. Tap the device icon and follow the onscreen instructions to complete pairing.

Specifications

Troubleshooting

1. Cannot connect to Govee Home App.

• Check if the light panel is powered on.
• Check if Bluetooth on the smartphone is enabled, or try connecting with another smartphone.
• When connecting for the first time, ensure the smartphone is near the light panel.
• If the connection error still exists, please delete the connected light panel from "My Device" on the app. Reconnect to Govee Home App by following the instructions provided previously.

2. Wi-Fi disconnected or failed to connect.

• Check if the light panel is powered on.
• Do not skip the Wi-Fi connection steps during the light panel pairing process.
• Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
• Ensure you entered the correct Wi-Fi password during the Wi-Fi set up process.
• Try connecting the light panel with a smartphone hotspot to check if your home network is working properly.
• Shorten the distance between the light panel and the Wi-Fi router to less than 1m, then reconnect.

3. Cannot connect to Alexa or Google Assistant.

• Ensure the Wi-Fi connection is stable and working properly.

4. Can multiple users control one light panel.

• Each light panel can only be controlled by one account.
• If multiple users want to manage the same light panel, ensure they all use the same account.

Customer Service

• Warranty: 12-Month Limited Warranty
• Support: Lifetime Technical Support
• Email: support@govee.com
• Official Website: www.govee.com
• Social Media: @Govee, @govee_official, @govee.official, @Goveeofficial, @Govee.smarthome

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment is authorized under Industry Canada's applicable licence-exempt CNR standards. Operation is subject to the following two conditions: (1) the device must not produce interference, and (2) the user must accept any radio interference, even if it may compromise the device's operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-005. This Class B digital apparatus complies with Canadian standard NMB-005.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, this device should be replaced. It is not intended for general illumination but for creating ambiance.

Responsible Party:

Name: GOVEE MOMENTS(US) TRADING LIMITED

Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448

Email: support@govee.com

Contact information: https://www.govee.com/support

Usage Restriction: FOR INDOOR USE ONLY

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Govee uses these marks under license.

Govee is a trademark of Shenzhen Intellirocks Tech Co., Ltd. Copyright ©2021 Shenzhen Intellirocks Tech Co., Ltd. All Rights Reserved.