Assembly Instructions

Spare Parts

• (1) Main Seat Component: The primary seat structure.
• (2) Seat Back Component: The backrest portion of the seat.
• (3) Mounting Bracket A: A bracket used for attaching components.
• (4) Mounting Bracket B: Another bracket for attachment.
• (5) Seat Adjustment Mechanism: The part that allows seat adjustment.
• (6) Hardware Kit: Includes an Allen wrench, screws, and nuts for assembly.

Assembly Steps

1. Step 1: Prepare the seat components by unscrewing existing fasteners. A hand is shown using an Allen wrench to "Screw out" screws, indicated by label (2), from the seat structure.

   Visual Description: Image shows a hand holding an Allen wrench engaged with screws on a black seat surface.

2. Step 2: Manipulate the seat adjustment mechanism (5). A hand is shown interacting with the mechanism, likely for alignment or adjustment before or during attachment.

   Visual Description: Image shows a hand operating the seat adjustment mechanism labeled (5).

3. Step 3: Attach mounting brackets (4). A hand uses an Allen wrench to secure bracket (4) to the seat component with screws.

   Visual Description: Image shows a hand with an Allen wrench and screw, attaching bracket (4) to a seat part.

4. Step 4: Attach component (3). A hand uses an Allen wrench to insert a screw into component (3) for attachment to the seat structure, as indicated by label (1).

   Visual Description: Image shows a hand using an Allen wrench to secure component (3) to a seat part.

5. Step 5: Secure components using fasteners. Hands are shown pushing fasteners into place to finalize the attachment of components labeled (3) and (4) to the seat structure.

   Visual Description: Images show hands pressing fasteners into slots on the seat assembly.