GLP – Welcome! – German Light Products
Instruction Manual for GLP models including: impression X4, LED RGBW Moving Light, impression X4 LED RGBW Moving Light
German Light Products Software version 1.18/18/12/10/n – Instruction Manual Rev. 20211203-01 5 1.1 Safety Instructions The IMPRESSION X4 is a High-Tech Product.
German Light Products Software version 1.18/18/12/10/n - Instruction Manual Rev. 20211203-01 5 1.1 Safety Instructions The IMPRESSION X4 is a High-Tech Product.
File Info : application/pdf, 27 Pages, 2.04MB
DocumentDocumentCovers software version: 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 E-mail: service@glp.de Web: http://www.glp.de www.glp.de Notes: 2 GLP German Light Products GmbH German Light Products® Table of contents 1 Description of Device..............................................................................................4 1.1 Safety Instructions ............................................................................................5 2 Preparation and Installation ...................................................................................6 2.1 Safety information.............................................................................................6 2.2 Mounting ...........................................................................................................7 2.2.1 Mounting on the Floor (Upright) ...........................................................8 2.2.2 Mounting in hanging position ...............................................................8 2.2.3 Mounting in sideways Position.............................................................9 2.3 Securing the Fixture..........................................................................................9 2.4 Connections....................................................................................................10 2.4.1 Power Supply.....................................................................................10 2.4.2 DMX...................................................................................................10 3 The Menu Field ......................................................................................................10 4 DMX Channel Selection (DMX Protocol) .............................................................13 5 Maintaining and Cleaning the IMPRESSION X4..................................................18 5.1 Safety regulations ...........................................................................................18 5.2 Maintenance and Interval (rule-of-thumb) .......................................................18 6 Technical Specifications ......................................................................................19 7 Dimensions............................................................................................................20 8 Index.......................................................................................................................21 9 Pattern....................................................................................................................22 Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 3 www.glp.de 1 Description of Device 1. Moving head (actively and passively cooled) 2. Arm with various cooling vents 3. LCD-Display/Menu (data entry) 4. Base with various connectors and Camlock mounting system 1 2 3 4 5. Power On/Off 6. DMX- Output (5 pin) 7. DMX- Input (5 pin) 8. Micro-fuse 5x20mm, T5A 9. Mains supply (Powercon) 10. 2 x Safety eyes 4 GLP German Light Products GmbH German Light Products® 1.1 Safety Instructions The IMPRESSION X4 is a High-Tech Product. To guarantee a smooth operation, it is necessary to respect the following rules. The manufacturer of this device will not take responsibility for damages through any disregard of the information provided in this manual. Warranty claims also will be voided in the case that the fixture housing is opened. 1. Before powering on the fixture, make sure that the fixtures fans and air inlets are clean and not blocked. 2. Ensure that the fixture head can rotate unhindered throughout its complete range of pan and tilt movement. A safety distance of at least 0.5 m must be maintained between the fixture and any easily inflammable material (e.g. decoration material). 3. Attention! Don't touch the fixture during the operation. This can cause injuries and/or damages. 4. The fixture doesn't contain any user serviceable parts. Opening the fixture will void all warranties. 5. It is necessary to wait at least 15 minutes after disconnecting the mains power before handling the fixture.. Pay attention to possible hot parts of the fixture. -- Danger of BURNING -- 6. Never look directly into the beam of light or into one of the LEDs. Never use optical apertures to observe the beam of light. LED Class 2M. You'll risk serious injury of your eyes and in particular of your retina. Attention: LED Class 2M can cause injuries of your eyes even without optical instruments in front of them or within a distance of less than 0.5m and short exposure time. Hence: Avoid direct radiation into your eyes! 7. To ensure safe operation, follow also the Installation guide described in chapter 2. Operating the IMPRESSION X4 without suitable safety aids like Safety cables or clamps/hooks can increase the risk of an accident and must be avoided. 8. Repair, maintenance, and installation work shall be done by qualified or GLP certified staff only. You need to pay attention to the common rules of technology that are not explicitly mentioned in this manual. 9. Use only original GLP spare parts. Any structural modification of the system will terminate all warranty claims. 10. Please keep this instruction manual for future reference. Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 5 www.glp.de 2 Preparation and Installation 2.1 Safety information The IMPRESSION X4 fixtures from GLP is fitted with a number of plano-convex lenses in a highly efficient collimator cluster. This type of lens can act as a strong magnifying glass. If the rays from a strong light source (such as the sun or another lighting fixture) are directed towards the front of any of these fixtures, then internal damage may occur. In a worst case scenario with a high power light source this can happen very quickly, damaging the fixture internally, potentially melting components or causing an internal fire within seconds. In order to avoid these possible problems please adhere to the following requirements: · Do not expose the front of a fixture to direct sunlight or any other strong light sources. · For outdoor applications during daylight make sure that the front face of any fixture is either shielded or points away from the sun, even when fixtures are not in use. · Do not modify the front glass or lenses of any fixture. These requirements have to be followed regardless of whether a fixture is powered on or off as the magnifying effect is an optical effect and therefore independent from the (electrical) state of the fixture. Especially when working with high powered beam-lights; extreme caution and observance of these safety instructions is mandatory. Should you have any questions about the operation of your fixture then please contact your local GLP office, or their authorized distributor, a list of which can be found at http://www.glp.de. 6 GLP German Light Products GmbH German Light Products® 2.2 Mounting The IMPRESSION X4 is fully operational whether it hangs or is mounted to the wall. It can also be operated while standing on the floor. Keep a safety distance of min. 0.5 m towards any easily inflammable materials (decoration etc.). Pay attention to the regulations of: BGV C1 (former VBG 70) and DIN VDE 0711-217. The installation shall be done by qualified staff only. For the various mounting positions of the IMPRESSION X4 (standing on the floor, sideways or hanging) different accessories kits are available. Through this a safe and firm installation is assured. You'll find dedicated connectors on the bottom side of the fixture which should be used. In addition the base is marked with a FRONT arrow allowing consistent orientation during installation. 1x M10 (length max.16mm) 2x Camlock quick release fasteners front side of the fixture Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 7 www.glp.de 2.2.1 Mounting on the Floor (Upright) To operate the IMPRESSION X4 in an upright position, please use the dedicated tri-legged floor stand supplied with your fixture. It is fixed to the base of the fixture with fasteners called Camlock quick-release connectors. Insert the two fasteners and turn each 90° to lock them. Do the opposite to release them again. On both sides you'll find eyelets to pull though a fixing strap. This allows for additional bracing of the fixture. 2x Camlock 2x Eyelets 2.2.2 Mounting in hanging position To operate the IMPRESSION X4 in a hanging position please use a halfcoupler (clamp). This can be mounted directly to the bottom side of the fixture. It should be attached centrically with a M10x16 mm thread bolt. Attention: Never use a longer bolt as this may damage the interior of the fixture. M10x16 8 GLP German Light Products GmbH German Light Products® 2.2.3 Mounting in sideways Position To operate the IMPRESSION X4 in a sideways position please use an additional mounting bar. This is fixed by two Camlock quick-release connectors. Two half-couplers (clamps) are used to mount the bar to a standard truss bar. This technique is necessary to cope with the torque which accrues in this mounting position. In addition it allows a repositioning of the couplers to fit between two truss chords. Never use the "Mounting in hanging position" technique described above to fasten the fixture in the sideways position. A safe and sound installation can not be assured in this way. In addition this can damage the fixture base. Half-coupler (clamp) 1 2x 90° Half-coupler (clamp) 2 without mounting bar 2.3 Securing the Fixture Regardless of the mounting method of the IMPRESSION X4 you'll have to use a stipulated safety wire. Attach the safety wire through one of the two holes provided on the base of the fixture and connect it to the primary support structure. Pay attention to a safe and proper fastening. The safety cable must comply with EN 60598-2-17 Section 17.6.6 and be capable of bearing a static suspended load that is ten times the weight of the fixture and all installed accessories. Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 9 www.glp.de 2.4 Connections 2.4.1 Power Supply ~100-240 Volt AC, 50-60 Hz, earth contact type plug - Powercon Connected load 350 VA (W) <=> T5A (micro-fuse 5x20mm) Please see printing on the case for the right electronic supply! Disconnect from the mains supply for changing the fuse and use only the above described micro-fuse type. 2.4.2 DMX USITT DMX-512 Standard input/output in 5 pin connectors. Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+] / Pin 4&5 N.C. The DMX- Addressing starts at the DMX- Address [001]. 3 The Menu Field You'll find the control board on the side part of the arm. It allows you to make all necessary adjustments of the IMPRESSION X4. With the Mode-key you get into the main menu. Afterwards you can navigate through the menu with the Up/Down-keys. Push the Enter-key to get in the next menu level or to confirm your settings. Make them and set functions ON/OFF with the Up/Down-keys. Confirm and save it with the Enter-key (the display shows OK). Push the Mode-key to cancel the entry and go back to the main menu. Mo d e Do wn Ente r Up To lock or unlock the keys of the menu field press Mode+Enter+Up simultaneously. Level1 DMX Start Address 001 Special MODE - ENTER Level 2 Level 3 Level 4 Manual DMX Pan Pattern Byte 3 Pattern Byte 2 Pattern Byte 1 Pattern Zoom Speed Movements Remark Set the DMX start address Manual control of all fixture functions Manual control for Pan (X-movement) Manual control for Pattern Byte 3 LED 17 -19 Manual control for Pattern Byte 2 LED 9 - 16 Manual control for Pattern Byte 1 LED 1 - 8 Manual control for Pattern channel / bank Manual control for Zoom Manual control for Pan/Tilt movements 10 GLP German Light Products GmbH DOWN - UP DOWN - UP German Light Products® Adjust DMX Image DMX input Monitor Pan/Tilt Movements Special White Temperature Dimmer Shutter White Blue Green Red Color Wheel Tilt Manual control for Pan/Tilt movements Manual control for Color temperature Manual control for Dimmer Manual control for Shutter Manual control for White Manual control for blue Manual control for green Manual control for red Manual control for the color wheel Manual control for Tilt (Y-movement) Key code xxxx Display Contrast PWM Frequ. Adj. Pan Offset Tilt Offset LED adjust Clear EEPROM Diagnose Use the code for entering the calibration menu (for authorized persons only) Adjustment for the Display contrast Changes PMW frequency Calibration for Pan-Offset Calibration for Tilt-Offset White adjust red White adjust blue White adjust green Adjust intensity for red channel Adjust intensity for blue channel Adjust intensity for green channel Erase EEPROM memory Diagnose fixture functions Set image if DMX off Save image in memory Pan Tilt Pattern Byte 3 Pattern Byte 2 Pattern Byte 1 Activates a stored scene if DMX is off Stores the scene currently sent to the unit Indicates the presently received DMX signal per DMX channel Instantaneous value for Pan Instantaneous value for Tilt Instantaneous value for Pattern Byte 3 Instantaneous value for Pattern Byte 2 Instantaneous value for Pattern Byte 1 Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 11 DOWN - UP www.glp.de Set DMX Mode Position feedback Reverse Pan Reverse Tilt Reset Pattern Zoom Speed Movements Pan/Tilt Movements Special White Temperature Dimmer Shutter White Blue Green Red Color Wheel Compressed Mode Normal Mode High-Res. Mode Instantaneous value for Pattern channel / bank Instantaneous value for Zoom Speed adjustment for Pan/Tilt movements see item below Instantaneous value for Pan/Tilt movements Instantaneous value for Special Adjustment of the color temperature for WHITE Instantaneous value for Dimmer Instantaneous value for Shutter Instantaneous value for White Instantaneous value for Blue Instantaneous value for Green Instantaneous value for Red Instantaneous value for Color Mixing unit Select the desired DMX Mode Fixture works in "Compressed" mode see also section 4 below Fixture works in "Normal" mode see also section 4 below Fixture works in "High Resolution" mode see also section 4 below Switch automatic position feedback ON/OFF Invert Pan movements: ON/OFF Invert Tilt movements: ON/OFF RESET and new calibration for all functions 12 GLP German Light Products GmbH German Light Products® 4 DMX Channel Selection (DMX Protocol) Normal-Mode 20 DMX channels Channel 1) PAN-coarse 2) PAN-fine 3) Tilt-coarse 4) Tilt-fine 5) Color (fixed) 6) Red 7) Green 8) Blue 9) White 10) Shutter 11) Dimmer 12) CTO 13) Special 14) Movement Function Time and Value DMX 0 .. 623° 3,2s 0 .. 242° 1,5s Colors adjustable via RGB Color 01 - Red 1) Color 02 - Amber 1) Color 03 - Warm Yellow 1) Color 04 - Yellow 1) Color 05 - Green 1) Color 06 - Turquoise 1) Color 07 - Cyan 1) Color 08 - Blue 1) Color 09 - Lavender 1) Color 10 - Malve 1) Color 11 - Magenta 1) Color 12 - Pink 1) White - CTO White White - CTB Rainbow Effect Stop 2) Rainbow Effect 3) Random colors Color mixing system - Red Color mixing system - Green Color mixing system - Blue Color mixing system - White Shutter closed Shutter pulse random Up-dimming then Shutter closing (random patterns) Shutter open then down-dimming (random patterns) Up-dimming then down-dimming (random patterns) Strobe effect pause Strobe effect slow - fast Shutter open Dimmer No CTO Continuous color temperature correction Pattern Block 1 channel 17 Pattern Block 2 channel 17 PWM lower PWM (Default) PWM higher RESET No macros 3200K 5600K 7200K slow - fast slow - fast 0 - 100% 0 - 100% 0 - 100% 0 - 100% slow fast slow fast slow fast slow fast 5s - 0.1s 1 Hz - 10 Hz 0 - 100% Applicable for ALL colors ~ 582 Hz .. ~ 600Hz 600Hz ~ 600 Hz .. ~ 618 Hz 0..255 0..255 0..255 0..255 0..7 8..15 16..23 24..31 32..39 40..47 48..55 56..63 64..71 72..79 80..87 88..95 96..103 104..111 112..119 120..127 128 129..223 224..255 0..255 0..255 0..255 0..255 0..15 16..47 48..79 80..111 112..143 160..199 200..239 240..255 0..255 0..7 8..255 0..3 4..7 100..149 150 151..200 250..255 0 % 0..100 0..100 0..100 0..100 0..2..5 3..5.5 6..8.5 9..12.5 13..15.5 16..18.5 19..21.5 22..24.5 25..27.5 28..30.5 31..34.5 35..37.5 38..40.5 41..43.5 44..46.5 47..49.5 50 51..88 89..100 0..100 0..100 0..100 0..100 0..5.5 6..18.5 19..31 32..43 44..56 63..77 78..94 95..100 0..100 0..2.5 3..100 0..1 1.5..2.5 39..57 58 59..78 98..100 0 Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 13 www.glp.de Channel macros 15) Speed Pan/Tilt 16) Zoom 17) Pattern 18) Pattern Byte 1 19) Pattern Byte 2 20) Pattern Byte 3 Function Time and Value Movement Size Phase Use "Speed" to adjust PAN 1 0° 1 90° 1 180° 1 270° PAN 2 0° 2 90° 2 180° 2 270° PAN 3 0° 3 90° 3 180° 3 270° PAN 4 0° 4 90° 4 180° 4 270° TILT size / phase see PAN PAN / TILT size / phase see PAN PAN / TILT (inverse) size / phase see PAN Circle size / phase see PAN Circle (inverse) size / phase see PAN Lying eight size / phase see PAN Random movement size / phase see PAN Pan/Tilt movement speed from controller Pan/Tilt, slow fast Use this channel also for the speed of the movements (channel 14). Wide - narrow (spot) No pattern 250 pre-defined patterns (see appendix A) Activates direct access to LED Pattern See channels 18-20 Direct access to Pattern of LED 1..8 Direct access to Pattern of LED 9..16 Direct access to Pattern of LED 17..19 Compress-Mode 14 DMX channels DMX 01..01 02..03 04..05 06..07 08..09 10..11 12..13 14..15 16..17 18..19 20..21 22..23 24..25 26..27 28..29 30..31 32..63 64..95 96..127 128..159 160..191 192..223 224..255 0..1 02..255 0...255 0..2 03..253 254..255 0...255 0...255 0..07 % 0.5 1.0 1.7 2.5 3.3 4.1 4.9 5.7 6.5 7.3 8.0 8.8 9.6 10.4 11.2 12 13..25 26..37 38..50 51..62 63..75 76..87 88..100 0..0..5 1..100 0...100 0..1 2..99 100 0...100 0...100 0..2.5 Channel 1) PAN-coarse 2) PAN-fine 3) Tilt-coarse 4) Tilt-fine 5) Color Function 0 .. 623° 0 .. 242° Colors adjustable via RGB Time and Value 3,2s 1,5s DMX 0..255 0..255 0..255 0..255 0..7 % 0..100 0..100 0..100 0..100 0..2.5 14 GLP German Light Products GmbH German Light Products® Channel (fixed) 6) Red 7) Green 8) Blue 9) White 10) Shutter 11) Dimmer 12) Zoom 13) Special 14) Pattern Function Time and Value DMX Color 01 - Red 1) Color 02 - Amber 1) Color 03 - Warm Yellow 1) Color 04 - Yellow 1) Color 05 - Green 1) Color 06 - Turquoise 1) Color 07 - Cyan 1) Color 08 - Blue 1) Color 09 - Lavender 1) Color 10 - Mauve 1) Color 11 - Magenta 1) Color 12 - Pink 1) White - CTO White White - CTB Rainbow Effect Stop 2) Rainbow Effect 3) Rainbow Effect, random colors Color mixing system - Red Color mixing system - Green Color mixing system - Blue Color mixing system - White Shutter closed Random Pulse effect Up-dimming then Shutter closing (random patterns) Shutter open then down-dimming (random patterns) Up-dimming then down-dimming (random patterns) Strobe effect pause Strobe effect, slow - fast Shutter open Shutter open Dimmer Wide - narrow (spot) Pattern Block 1 channel 14 Pattern Block 2 channel 14 PWM lower PWM (Default) PWM higher RESET No pattern 250 pre-defined patterns (see appendix A) Color temperature 3200K Color temperature 5600K Color temperature 7200K slow - fast slow - fast 0 - 100% 0 - 100% 0 - 100% 0 - 100% slow - fast slow - fast slow - fast slow - fast 5s .. 1s 1 Hz .. 10 Hz 0 - 100% ~ 582 Hz .. ~ 600Hz 600Hz ~ 600 Hz .. ~ 618 Hz 8..15 16..23 24..31 32..39 40..47 48..55 56..63 64..71 72..79 80..87 88..95 96..103 104..111 112..119 120..127 128 129..223 224.255 0..255 0..255 0..255 0..255 0..15 16..47 48..79 80..111 112..143 144..199 200..239 240...249 251..255 0..255 0...255 0..3 4..7 100..149 150 151..200 250..255 0..2 03..253 % 3..5.5 6..8.5 9..12.5 13..15.5 16..18.5 19..21.5 22..24.5 25..27.5 28..30.5 31..34.5 35..37.5 38..40.5 41..43.5 44..46.5 47..49.5 50 51..88 89..100 0..100 0..100 0..100 0..100 0..5.5 6..18.5 19..31.5 32..43 44..56 57..77 78..94 95..97.5 99..100 0..100 0...100 0..1 1.5..2.5 39..57 58 59..78 98..100 0..1 2..99 Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 15 www.glp.de High Resolution (Extended) -Mode 21 DMX Channels Channel Function Time and Value DMX 1) PAN-coarse 2) PAN-fine 3) Tilt-coarse 4) Tilt-fine 5) Red- coarse 6) Red- fine 7) Green-coarse 8) Green-fine 9) Blue-coarse 10) Blue-fine 11) White-coarse 12) White-fine 13) Shutter 14) Dimmer-coarse 15) Dimmer-fine 16) Zoom 17) Special 18) Pattern 19) Pattern Byte 1 20) Pattern Byte 2 21) Pattern Byte 3 0 .. 623° 3,2s 0 .. 242° 1,5s Color mixing system Red 0 - 100% Color mixing system Red-Low Color mixing system Green 0 - 100% Color mixing system Green-Low Color mixing system Blue 0 - 100% Color mixing system Blue-Low Color mixing system White 0 - 100% Color mixing system White-Low Shutter closed Random Pulse effect slow - fast Up-dimming then Shutter closing slow - fast (random patterns) Shutter open then down-dimming slow - fast (random patterns) Up-dimming then down-dimming slow - fast (random patterns) Strobe effect pause 5s - 1s Strobe effect, slow - fast 1 Hz - 10 Hz Shutter open Shutter open Dimmer 0 - 100% Dimmer - Low Spot - Flood Pattern Block 1 channel 18 Pattern Block 2 channel 18 PWM lower ~ 582 Hz .. ~ 600Hz PWM (Default) 600Hz PWM higher ~ 600 Hz .. ~ 618 Hz RESET No pattern 250 pre-defined patterns (see appendix A) Activates direct access to LED Pattern See channels 18-20 Direct access to Pattern of LED 1..8 Direct access to Pattern of LED 9..16 Direct access to Pattern of LED 17..19 0..255 0..255 0..255 0..255 0..255 0..255 0..255 0..255 0..255 0..255 0..255 0..255 0..15 16..47 48..79 80..111 112..143 144..199 200..239 240...249 251..255 0..255 0..255 0...255 0..3 4..7 100..149 150 151..200 250..255 0..2 03..253 254..255 0...255 0...255 0..07 % 0..100 0..100 0..100 0..100 0..100 0..100 0..100 0..100 0..100 0..100 0..100 0..100 0..5.5 6..18.5 19..31.5 32..43 44..56 57..77 78..94 95..97.5 99..100 0..100 0..100 0...100 0..1 1.5..2.5 39..57 58 59..78 98..100 0..1 2..99 100 0...100 0...100 0..2.5 1) The predefined colors can be used as start-colors for the Rainbow effect. Please select first a desired start-color before you activate the rainbow effect. All IMPRESSION X4 will then start from that color and will execute the rainbow effect synchronously. Different IMPRESSION X4 can have different start-colors but will still execute the rainbow effect synchronously. If you choose a color 16 GLP German Light Products GmbH German Light Products® different from the ones marked with 1) in the tables above the rainbow start-color will be red. 2) Rainbow-effect Stop will pause this function. After resuming the rainbow-effect will be continued from the current color. 3) The Rainbow-effect will run synchronously only if started from one of the predefined colors (see also 1) before). Locking and unlocking the Control Panel Please lock and unlock the control panel by pressing the menu keys MODE & ENTER & UP at the same time. Additional Display Indications As a default you'll find the following additional information in the first row of the LCD display: Vxx/xx/xx/xx/x N = Normal Mode / C = Compressed Mode / H = High Res. Mode N = Tilt normal / I = Tilt inverted N = Pan normal / I = Pan inverted LED driver version Main CPU version Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 17 www.glp.de 5 Maintaining and Cleaning the IMPRESSION X4 The IMPRESSION X4 is a fixture of very low maintenance. It is only necessary to clean the air inlets and outlets as well as the optical LED lenses from time to time. For safe operation it is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build up on, or within the fixture. Otherwise the fixture's light-output will be significantly reduced or damages can occur. Regular cleaning will not only ensure the maximum light-output, but will also allow the fixture to operate reliably throughout its life. A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances should alcohol or solvents be used! 5.1 Safety regulations · Pull out the mains power plug! · Wait min. 15 minutes after disconnecting power to allow the fixture to cool down. 5.2 Maintenance and Interval (rule-of-thumb) The contamination of the fixture depends on the environment details. Hence no general guidelines can be given. The intervals given below are only suggestions from our experience. Position LED reflector and optical system Fan and air channel Interval weekly monthly In this way soft brush /lint-free cloth vacuum cleaner, airbrush, etc. Attention: · Never let optical parts come into contact with oil or fat. · Before running the fixture wait until all parts are dry. · Never tough lenses with bare fingers. 18 GLP German Light Products GmbH German Light Products® 6 Technical Specifications Power supply Power consumption 350 VA (Watt) Power Input ~100-240 V AC, 50-60 Hz (wide range input) Fuse protection Micro-fuse 5x20 mm, T5A Operational Parameters Max. Ambient Temperature 5° - 45°C (integrated overheating switch) Mounting Position Any (see relevant chapter) Lighting System - Additive Color mixing LED Type 19 x Osram Ostar RGBW multi-chip Lifetime 50,000 h Wavelength optimized for maximum presentable color space Optical System Full RGBW / High efficient Collimator cluster Shutter / Dimmer (8/16 Bit) Strobe- Effect with variable speed between 1 - 10 flashes per second, Random-Strobe, PulseEffects Continuous Dimmer 0 - 100% Zoom 7 to 50 degree continuous zoom Optical Patterns Several hundred pre-defined beam patterns with direct access and manipulation DMX Control Standard USITT DMX-512, 5 pin XLR; [+] = Pin 3 / [-] = Pin 2 / [Ground] = Pin 1 / Pin 4&5 N.C. Die DMX- Addressing starts at the DMX channel [001]. Pan / Tilt (8/16 Bit) Pan- movement 623° in min. 3,2 seconds (Position Feedback) Tilt- movement 242° in min. 1,5 seconds (Position Feedback) Weights and Measures Width of the base Length of the base 341 mm 145 mm height (head vertical) Weight (net) 375 mm (incl. standing foot/tripod) 8.0 kg Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 19 www.glp.de 7 Dimensions 341 235 375 350 297 189 242° 339 311° 311° 90 20 GLP German Light Products GmbH German Light Products® 8 Index B beam-lights ....................................................6 BGV C1............................................................7 C Camlock ........................................................... 8 Cleaning......................................................... 18 Compress-Mode ..........................................14 D Danger of BURNING ......................................5 Description of Device.......................................4 Dimensions ....................................................20 DIN VDE 0711-217..........................................7 Display Indications ..................................17 DMX ............................................................... 10 E e-mail ...............................................................1 EN 60598-2-17 ................................................9 Enter-key .....................................................10 Eyelets .............................................................8 H Half-couplers (clamps).....................................9 High Resolution (Extended) -Mode............16 I Instruction Version...........................................1 Internet.............................................................1 L LED Class 2M.................................................5 M Maintenance ..................................................18 Menu Field .....................................................10 Micro-fuse ......................................................10 Mode-key .....................................................10 Mounting......................................................... 7 Mounting in hanging Position.......................... 8 Mounting in sidewise Position......................... 9 Mounting on the Floor ..................................... 8 N Normal-Mode ............................................... 13 O Optical parts ................................................ 18 P Pan- Movement............................................. 19 Patterns......................................................... 22 plano-convex lenses ....................................... 6 Power Supply .............................................. 10 Powercon ........................................................ 4 R RESET .......................................................... 13 S Safety distance ............................................... 7 Safety information ........................................... 6 Safety Instructions .......................................... 5 Secure the Device ......................................... 9 Software Version............................................. 1 sunlight............................................................ 6 T Technical Specifications ............................ 19 Tilt- Movement .............................................. 19 U Up/Down-keys ........................................... 10 V VBG 70 ........................................................... 7 W Warranty claims .............................................. 5 Weights and Measures ................................. 19 Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 21 www.glp.de 9 Pattern Patterns are grouped into two sets which can be activated and selected via the DMX channel "Special". Choose the desired pattern by its corresponding DMX value on channel "Pattern". Orientation: Patterns are shown when looking at the front of a standing fixture; Head faced in direction of fixtures front label: DMX Pan @ 128; Tilt @ 220; Zoom @ 255 (letters are displayed homogenous). Front Patterns Set 1 DMX Pattern DMX Pattern DMX Pattern DMX Pattern 000 013 026 039 001 014 027 040 002 015 028 041 003 016 029 042 004 017 030 043 005 018 031 044 006 019 032 045 007 020 033 046 008 021 034 047 009 022 035 048 010 023 036 049 011 024 037 050 012 025 038 051 22 GLP German Light Products GmbH German Light Products® DMX Pattern 052 DMX Pattern 069 053 070 054 071 055 072 056 073 057 074 058 075 059 076 060 077 061 078 062 079 063 080 064 081 065 082 066 083 067 084 068 085 DMX Pattern 086 087 088 089 090 091 092 093 094 095 096 097 098 099 100 101 102 DMX Pattern 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 23 www.glp.de DMX Pattern 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 DMX Pattern 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 DMX Pattern 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 DMX Pattern 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 24 GLP German Light Products GmbH German Light Products® DMX Pattern 188 DMX Pattern 205 189 206 190 207 191 208 192 209 193 210 194 211 195 212 196 213 197 214 198 215 199 216 200 217 201 218 202 219 203 220 204 221 DMX Pattern 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 DMX Pattern 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 reserved 254 reserved 255 reserved Software version 1.18/18/12/10/n Instruction Manual Rev. 20211203-01 25 www.glp.de Patterns Set 2 DMX Pattern 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 26 DMX Pattern 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 DMX Pattern 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 DMX Pattern 051 052 053 054 055 056 057 058 059 - GLP German Light Products GmbH