Federal Signal: Comprehensive Siren and Control System Catalog
This document provides an overview of various warning siren systems and control solutions offered by Federal Signal Corporation, designed for industrial and public safety applications.
Omni-Directional Siren, Model 2
The Federal Signal Model 2 is a powerful omni-directional outdoor warning siren capable of producing intense warning signals over a large area. It can be installed on a roof or utility pole.
Key Features:
- Available in 120VAC and 240VAC
- High-efficiency design requiring moderate power
- Produces 102dBc @ 100'
- Roof mount standard, pole mount optional
This single-tone siren produces 102dBc at 100 feet with a universal motor operating from either 120VAC/DC or 240VAC/DC. A Federal Signal Model RC2W motor starter (purchased separately) is required. It is ideal for plant-wide warning systems in industrial facilities, suitable for start/stop work signaling, plant evacuation, or emergency situations.
Specifications:
| Model | Voltage | Decibels @ 100' | Output Frequency | Beam Width | Mount |
|---|---|---|---|---|---|
| 2-120 | 120VAC/DC | 102dBc | 533Hz | 360° | Roof (standard) or Pole (Model PMS required) |
| 2-240 | 240VAC/DC | 102dBc | 533Hz | 360° | Roof (standard) or Pole (Model PMS required) |
Diagram Description: Illustrates the physical dimensions and key components of the Model 2 siren, including Housing, Stator, Motor, and Intake, with measurements for height (25" / 635 mm), diameter (19.63" / 498.6 mm), and conduit connection (1/2").
Replacement Parts: Bearing (Two Required), Brush and Spring (Two Required), Brush Holder (Two Required).
How to Order: Specify model and voltage, motor starter (RC2W), and options like Pole Mount Stand (PMS) or Radio Activated Controller (FC). Contact the factory for assistance.
Battery Powered Electromechanical Siren, Models 2001-130
The Federal Signal Model 2001-130 is an innovative high-power outdoor warning siren, representing a new generation of rotating, uni-directional electromechanical sirens. It is designed for outdoor warning applications.
Key Features:
- Patented stator/horn design for high efficiency and output from minimal battery source
- Sound output can cover four square miles
- Full battery operation or battery backup
- Produces 130dBc @ 100'
- Three tones: Wail, Fast Wail, and Steady
- Maintenance-free sealed bearing motors
- UL Listed Siren Controllers
This siren operates with a 120VAC battery-backup control cabinet or a 240VAC/VDC control cabinet. It can be controlled remotely via wire or radio using the Model FC controller. The siren produces 130dBc at 100 feet with a 60° beam of sound that rotates at 2 RPM (adjustable to 6 RPM). It is suitable for wide area coverage and high ambient noise environments.
Specifications:
| Model | Voltage | Decibels @ 100' | Operating Current | Standby Current |
|---|---|---|---|---|
| 2001-130 | 48VDC | 130dBc | 100 amps (Nominal) | N/A |
| DCFC | 120VAC | N/A | 4 amps | 0.2 amps |
| 2001AC | 240V | N/A | 30 amps¹ | N/A |
¹ Also operates on 208 or 220/240VDC (please specify). ² 50 amp service recommended.
Diagram Description: Depicts the Model 2001-130 siren and its DCFC Control Cabinet. The siren diagram labels include Crane Lift Eye Bolt, Chopper Motor, Ring Radiator, Rotator Housing, and Protective Screen. The control cabinet diagram shows components like Battery Chargers, Contactor, and Federal Controller, with battery connections. It also includes DANGER/WARNING labels related to moving parts, explosive gas, corrosive material, and specific battery requirements (Delco Voyager M24MF).
Specifications: Rotation Speed: (2001-130) 2-6 RPM (adj.). Continuous Signal Time: (2001DC) 15 minutes minimum @ full output. Standby Time: (2001DC) 20+ days with 5 minutes full signal reserve. Effective Range at 70dBc: 6200 ft.
Tones: Steady (750 Hz), Wail (470-705 Hz), Fast Wail (600-705 Hz).
Dimensions:
| Model | L | W | H |
|---|---|---|---|
| 2001-130 | 41" (104.14 cm) | 37" (93.98 cm) | 55" (139.7 cm) |
| DCFC | 16" (40.64 cm) | 24" (60.96 cm) | 48" (121.92 cm) |
| 2001AC | 10" (25.4 cm) | 24" (60.96 cm) | 24" (60.96 cm) |
How to Order: Call the factory for assistance.
Two-Way Digital Controller for 2001 and Eclipse Siren, Models ACFCTB and DCFCTB
The ACFCTB and DCFCTB models are two-way, battery-operated status monitoring siren controllers designed for use with the 2001 and Eclipse siren series. They interface with a two-way radio transceiver and communicate via FSK signaling.
Key Features:
- Two-Way Radio Control and Status Monitoring
- FSK Two-Way Signaling Format
- Simultaneous Single Tone, Two-Tone Sequential, and DTMF Decoding
- Four local push buttons for activation
- UL Listed for general signaling
These controllers offer two independent relay outputs, four landline inputs, and four local push buttons. Programming is done via RS232 serial port or over-the-air. They provide six user programmable functions and monitor various operational areas like AC Power Status, Communications Status, Low Battery Voltage, Siren Activation Current, Intrusion, and Siren Rotation.
Specifications:
| ACFCTB | DCFCTB | 2001TR | |
|---|---|---|---|
| Operating Temperature: | -30°C to 65°C | ||
| AC Supply Voltage: | 115VAC @ 4.0 amps | 120VAC @ 4.0 amps | 208/220/240 VAC single phase @ 25-30 amps (approx.) |
| Shipping Weight: | 155 lbs. (70.5 kg) | 300 lbs. (136.36 kg) | 150 lbs. (68.2 kg) |
| Current Draw: | < 0.2 amps in standby | ||
| Relay Outputs: | 4 Relay Outputs | ||
| Contact Rating: | 5A @ 28VDC, 5A @ 240VAC | ||
| Audio Output Voltage: | >2V Peak to Peak | ||
| Total Harmonic Distortion: | 10% @ 1kHz Sinewave | ||
| Maximum Audio Load: | 8 Ohms | ||
Diagram Description: Shows the physical layout of the ACFCTB and DCFCTB Controller Cabinets, indicating the Mounting Channel, Controller Cabinet, and Battery Cabinet.
Replacement Parts: Two-way Federal Controller (AC/DC Powered, High Band, UHF Band) with various part numbers.
How to Order: Specify Federal Programming Software (FSPWARE) or Federal Commander Digital Software (SFCDWARE). Contact the factory for assistance.
Directional Speaker Array, Model DSA
The Federal Signal Model DSA Directional Speaker Array provides excellent voice and tone reproduction, ideal for overcoming high levels of industrial noise. Its design allows for flexible mounting and concentrated sound output.
Key Features:
- Overcomes ambient noise of industrial environments
- Provides maximum speech recognition and tone reproduction
- Produces 121dBc @ 100'
- Three mounting kits available
The array can combine up to four speaker arrays, each holding 2-6 re-entrant speakers with 70° horizontal dispersion. Mounting kits allow arrays to be mounted on the same pole at 90° increments, with adjustable downward tilt. Each speaker contains a 100-watt driver. Amplification is provided by the Model UV controller (sold separately). The DSA offers better speech intelligibility than omni-directional arrays.
Specifications:
| Model | No. of 100W Speakers | Total Watts | Decibels @ 100' | Effective Range | Net. Wt. lbs./kg |
|---|---|---|---|---|---|
| DSA2 | 2 | 200 | 111dBc | 1,700' | 43/19.5 |
| DSA3 | 3 | 300 | 115dBc | 2,200' | 80/36.2 |
| DSA4 | 4 | 400 | 117dBc | 2,600' | 95/43.1 |
| DSA5 | 5 | 500 | 119dBc | 3,000' | 110/49.9 |
| DSA6 | 6 | 600 | 121dBc | 3,400' | 125/56.7 |
Diagram Description: Details the assembly of the Directional Speaker Array (DSA), showing components such as the Driver Access Panel, Radio Antenna, Jacket Speaker Cable, Ground Wire, Siren Control, Battery Box, Service Disconnect, Control Unit Ground Wire, Class II Utility Pole, Stainless Steel Mounting Brackets, Fiberglass Projectors, and Ground Level with optional concrete footing.
Specifications: Color: Black projectors with Off-White Housing. Paint: TGIC - Polyester Powder Coat. Frequency Response: 300Hz - 4000Hz.
Mounting Kits: DSAMK1 (wall mount), DSAMK2 (pole mount, 180° apart), DSAMK4 (pole mount, 90° or 180° apart).
Replacement Parts: Driver, 100 watt (Model 8570063A).
How to Order: The DSA array is used with the UV controller. Call the factory for assistance.
Electro-Mechanical Siren, Model ECLIPSE8
The Eclipse8 is a mid-sized DC-powered omni-directional siren for outdoor warning, producing high-intensity signals with a maximum sound pressure level of 115dBc at 100 feet. It offers 360° coverage and three signal options.
Key Features:
- Omni-directional for 360° coverage
- Three distinct warning signals (Steady, Wail, Fast Wail)
- Full battery operation or battery back-up option
- High efficiency design produces 115dBc at 100 ft
- Optional roof mount stand
- 100% aluminum design
Operating from 48VDC, the Eclipse8 provides maximum coverage with minimum installation costs. It offers a minimum of 15 minutes of siren operation from its batteries, even after 24 hours without AC power. Siren controls are available for battery, AC, or AC with battery back-up operation. One-way and two-way radio control or landline options are available.
Specifications:
| Model | Voltage | Decibels @ 100' | Operating Current | Output Frequency | Beam Width | Mount |
|---|---|---|---|---|---|---|
| Eclipse8 | 48VDC | 115dBc | 112 amps (Nominal) | 525Hz | 360° | Roof or Steel pole |
Diagram Description: Shows the Eclipse8 siren with dimensions (63.4"/161 cm height, 46.68"/118.6 cm width) and indicates the Section A view and an Optional Roof Mounting Plate (RME).
Specifications: Operating Temperature: -22°F to 140°F (-30°C to 60°C). Effective Range @ 70dBc: 2200'.
Weights:
| Net Weight | Shipping Weight | |
|---|---|---|
| 225 lbs. (116.0 kg) | 380 lbs. (173.0 kg) |
Replacement Parts: Motor (Part Number 84020061).
How to Order: Specify model (Eclipse8) and mounting option (RME). Call the factory for assistance.
Siren Controller, Model FC
The Federal Signal Controller Model FC is a versatile, economical 120VAC radio receiver/decoder and timer with relay outputs, suitable for various siren control applications.
Key Features:
- Remote radio control function available
- Controls warning lights and audible devices
- Two-tone sequential, DTMF, and digital FSK decoding
- Four individually programmable output relays
- Push-button local control or dry-contact closure inputs for landline control
- Six built-in siren tone signals
The microprocessor-based controller supports two-tone sequential, DTMF, or FSK decoding. Options include a synthesized radio receiver, a built-in tone generator, public address capability, and PC software for timing customization. It can control Federal Signal siren Models 2, 2001, and STH10, and can add radio activation to PA and SelecTone® systems.
Diagram Description: An assembly drawing of the FC unit, showing various components and connections.
Specifications: Electrical specifications include AC Power Inputs (120 or 240VAC), Battery Input (11.5-20.0VDC), Input Current, Relay Output Timings, Receiver/Decoder capabilities (Frequency Range, Sensitivity, Rejection, Selectivity, Stability, Antenna Impedance, Audio Band Pass), DTMF/FSK/Two-Tone formats, Operating Temperature, Dimensions, and Weight.
How to Order: Contact Federal Signal Sales Engineers for system design. Specify model (FC), voltage, radio frequency, antenna, and options like Programming Software (FSPWARE) or Tone coded squelch decoder (CTCSS/PL).
Modulator® Speaker Array, Model MOD Series
The Federal Signal Modulator® Speaker Array Series comprises six electronic sirens designed for high-intensity warning signals over a wide area. These omni-directional sirens offer efficient operation and moderate power demands.
Key Features:
- 360° sound coverage with no horizontal variation
- Multiple tones and public address capability
- Excellent frequency response
- Produces 106dBc to 121dBc @ 100'
- Each module has four 100-watt drivers
- Operates with UV controller
Each array is made of aluminum modules with four 100-watt drivers and requires a separate control unit/battery cabinet. The Modulator Speaker Array provides a flat frequency response from 200 to 2000Hz, suitable for voice reproduction or various warning signals. It is intended for outdoor industrial applications.
Specifications:
| Model | Active Modules | Watts | Decibels @ 100' | Effective Range @ 70dBc |
|---|---|---|---|---|
| MOD1004 | 1 | 400 | 106dBc | 1,200' |
| MOD2008 | 2 | 800 | 112dBc | 1,800' |
| MOD3012 | 3 | 1200 | 115dBc | 2,200' |
| MOD4016 | 4 | 1600 | 118dBc | 2,800' |
| MOD5020 | 5 | 2000 | 120dBc | 3,100' |
| MOD6024 | 6 | 2400 | 121dBc | 3,400' |
* MOD 6048 available, produces 125dBc @ 100'. Contact factory for specification assistance.
Diagram Description: Shows the assembly of the Modulator Speaker Array (MOD), detailing components like Crane Lift Eyebolt, Driver Access Door, Idle Module, Federal Signal supplied speaker cable, PC conduit, Crane Lift Hole, Battery Box, Service Disconnect, Class II Utility Pole, Ground Rod, and Siren Control.
Specifications: Frequency Response: 200-2000Hz ± 1dB. Horizontal Coverage: 360° ± 1dB. Wind Loading @ 110mph: Varies by model (e.g., MOD1004: 360 lbs.).
Dimensions and Weights:
| Model | Height (in./cm) | Net Wt. (lbs./kg) | Shipping Wt. (lbs./kg) |
|---|---|---|---|
| MOD1004 | 43.17"/109.65 | 181.0/82.0 | 350.0/158.8 |
| MOD2008 | 63.7"/161.8 | 296.0/134.3 | 400.0/181.4 |
| MOD3012 | 84.3"/214.1 | 411.0/186.4 | 600.0/272.2 |
| MOD4016 | 105.0"/266.7 | 526.0/238.6 | 750.0/340.2 |
| MOD5020 | 125.5"/318.8 | 641.0/290.8 | 1000.0/453.6 |
| MOD6024 | 146.0"/370.8 | 760.0/344.7 | 1270.0/576.0 |
How to Order: Specify speaker array model number and corresponding UV and Amplifier. Specify optional CABEX 10' cable extension. Call the factory for assistance.
Replacement Parts: Driver, 100 watt (Model 8570063A).
Federal Commander Digital System, Model SFCD
The Federal Commander Digital System offers comprehensive, secure activation and status monitoring for siren systems, designed for emergency management and system operators. It comprises the SS2000D encoder, SFCDWARE package, and digital Siren Controllers.
Key Features:
- Up to 225 sites
- 9 repeaters and two chains
- 10 person call list
- 1200 baud MSK modem
- Conventional and trunking radio compatibility
- Includes LapLink Remote Communications Software
- 56K PCI modem
- Optional Networking TCP/IP interface
This system provides complete alert and notification capability, from siren activation to in-home alerts. Its modular design allows for expansion to accommodate changing needs, supporting over 250 RTUs and 16 zones. Digital Siren Controllers are available for various siren types and feature over-the-air programmability.
Diagram Description: Illustrates the Federal Commander Digital System architecture, showing components such as a Remote Computer, Printer, Telephone, Phone Line, Radio, SS2000D encoder, RS232 interface, and RTUs.
CCU Minimum Requirements: Specifies PC hardware and software requirements, including an IBM compatible Pentium II processor, Windows operating system, 256MB RAM, 10GB Hard Disk, SVGA monitor, CD ROM drive, keyboard, printer port, serial port, telephone modem, mouse, dot matrix printer, phone line, and AC surge protection device.
How to Order: Call the factory for assistance in specifying an outdoor warning system.
DTMF Siren Encoder/Decoder, Model SS2000
Federal Signal's Model SS2000 is a versatile, user-friendly, and economical siren controller supporting one-way communication with an option for two-way communication using DTMF or FSK encoding. Command sequences are stored in non-volatile memory.
Key Features:
- LCD shows 4-line control and programming information
- 18 "hot" command keys
- Hundreds of available functions
- Two-way unit automatically logs activity to printer output
- Desktop and 19" rack mount options
- Optional printer and activation via contact closure through SS Remote
- Easy to program and use
The unit is powered by a 120VAC outlet and can be backed up by a 12VDC battery and charger. It features a four-line backlit LCD, a full DTMF keypad, and 18 user-programmable function keys. The SS2000 monitors AC power, intrusion, amplifiers, drivers, operating current, charger, battery, and audio lines. The SS2000T (DTMF) and SS2000D (FSK) models offer extended benefits, including automatic reporting of siren/power failures.
Diagram Description: Shows the SS2000 DTMF Encoder/Controller with its dimensions and a detailed view of the front panel layout, including keys for various functions like ARM, DISARM, REPORT, STEADY, WAIL, etc.
Specifications:
| Value | |
|---|---|
| Line Input: | 120VAC wall transformer |
| Battery Input: | 11.5-20.0VDC (overvoltage and reverse voltage protection) |
| Input Current: | 175mA standby, 250mA max. |
| Operating Temperature: | 32° F to 122°F (0°C to 50°C) |
| Distortion: | < 3% from pure sinewave |
| Emphasis: | Optional de-emphasis 6dB/octave |
| DTMF Format: | 3-20 digits |
| DTMF Timing: | 35/5 to 999/999 milliseconds (digit length/interdigit silence) |
| Display: | 80-character LCD display (4 lines x 20) |
| DTMF Decode Sensitivity: | 20dB signal/noise |
| Outputs: | 3-DPDT (PTT, Audio and mic disconnect, spare) |
| Dimensions (Rack): | 19.0" x 10.15" x 5.24" (482.6 mm x 257.8 mm x 133.0 mm) |
| Dimensions (Desktop): | 11.56" x 10.25" x 4.2" (293.6 mm x 260.4 mm x 107.0 mm) |
| Weight (Rack): | 8.0 lbs./4.0 kg |
| Weight (Desktop): | 6.0 lbs./3.0 kg |
How to Order: Contact Federal Signal Sales Engineers. Specify model number (desktop/rack, 1-way/2-way), optional printer, and optional activation via contact closure.
UltraVoice™ Electronic Siren Controller, Model UV
The Federal Signal UltraVoice™ is a microprocessor-based control system designed for high-power electronic speaker arrays, providing one- or two-way control and status monitoring.
Key Features:
- One- or two-way siren control
- Status monitoring
- Seven warning tones
- Public address capability
- Digital pre-recorded voice messages
- Land line or radio control
- Pole or wall mount options
- Type 4 or optional 4X enclosure
- UL and cUL Listed
The UltraVoice produces amplified audio signals, including seven built-in warning tones, live public address, and pre-recorded voice messages. It is housed in two cabinets: a control cabinet for the module and amplifiers, and a separate battery cabinet. Two-way systems include sensor packages, radio transceivers, and encoder/decoders. Computer-controlled status monitoring covers various conditions like AC Power, Battery Voltage, and Activation Current.
Diagram Description: Shows the structure of the UltraVoice system, differentiating between the Control Cabinet (housing the Control Module, Options Module, Amplifier Module, Blank Amplifier Modules, Sealed Conduit) and the Battery Cabinet. It notes that Steel or Stainless Steel Cabinets are available.
Specifications:
| Value | |
|---|---|
| Power Input Voltage: | 120/240±10%, 50/60Hz VAC single-phase |
| Input Current: | 7 A Max. |
| Operating Voltage: | 24VDC |
| Standby Current (UV): | 100mA DC |
| Standby Current (UVT): | 600mA DC |
| Standby Time: | > 7 days |
| Continuous Signaling Time: | 30 min. |
| Control Module Signal Duration (auto reset): | 3 min. |
| Microphone Input Impedance: | 10k ohms |
| Audio Distortion: | 1% THD max. |
| Maximum Load: | 600 ohms |
| Contact Closure: | (min) 500 ms<1.0k ohms |
| Amplifier Module Frequency Response: | (300 to 3 kHz) ±3dB (ref. 1kHz) |
| Output Voltage (Tone and PA): | 70Vrms (to speaker drivers) |
| Input Impedance (per amplifier): | 100k ohms |
| General Operating Temperature**: | -22°F to 149°F (-30°C to 65°C) |
| Enclosures (Control Cabinet): | Type 4 or 4X |
| Enclosures (Battery Cabinet): | Type 4 (vented) |
** The siren can operate throughout this temperature range provided the battery temperature is maintained at 0°F/-18°C or higher.
Standard Tones: Wail, Pulsed Wail, Alternate Wail, Steady, Pulsed Steady, Alternate Steady with corresponding frequency ranges and sweep rates.
Battery Requirements: Customer must provide necessary batteries. Delco Voyager M24MF batteries are recommended.
How to Order: Contact Federal Signal Sales Engineers to specify model number (UV, UVT), radio control requirements, protocol, radio frequency, number of 400-watt amplifiers (Model UV400), and options like Digital Voice Chips, Customized Tones, Solar Charging System, FS-MWIN Software, SS2000 Encoder, cabinets, SFCDWARE, and MNC-MC Microphone.
UltraVoice™ Indoor Controller, Model UVIC
The Federal Signal UltraVoice™ Indoor Controller, Model UVIC, is designed to deliver clean, amplified audio for indoor notification or evacuation networks. It provides high-quality reproduction of live or pre-recorded voice and tone.
Key Features:
- Landline or Radio-Controlled with Two-Way Status Monitoring
- Public Address capability
- Seven Standard Tones
- 70 Vrms Audio Output Standard (25 Vrms optional)
- 4 Programmable Relays
- Type 1 Enclosure
- Up to 16 Digitally Stored Messages Standard (8 minute total storage capacity)
- Batteries and Local Microphone Included
- Optional Windows Based Activation and Status Monitoring Software
- UL and cUL Listed
The UVIC is housed in a single NEMA1 cabinet and supports up to two 400-Watt amplifiers (sold separately). It requires 120VAC and includes two sealed lead-acid batteries for over 30 minutes of operation during power loss. The UVIC can be activated via landline or radio control. It is compatible with the SS2000D encoder and Federal Commander® Windows® Based Digital status monitoring software.
Diagram Description: Shows the dimensions of the UVIC Indoor Controller: 31" height, 13.62" width, and 17.36" depth.
Order Information:
| Model | Description |
|---|---|
| UVIC | Indoor Controller, No Radio |
| UVICH | Indoor Controller, Two-way VHF (150-174) MHz |
| UVICU | Indoor Controller, Two-way UHF (450-474) MHz |
| UVIC240 | Indoor Controller, 240VAC, No Radio |
| UVICH240 | Indoor Controller, Two-way 240VAC, VHF |
| UVICU240 | Indoor Controller, Two-way 240VAC, UHF |
Specifications:
| Value | |
|---|---|
| Input Voltage: | 120 or 240VAC +/- 10%, 50/60 Hz Single-phase |
| Input Current: | 5A AC, 45A DC Max |
| Operating Voltage: | 24VDC |
| Standby Time: | 3 Days with 5 minutes in reserve |
| Continuous Signaling Time: | 30 minutes |
| Audio Output (UV400): | 70Vrms (nominal) |
Optional Equipment: Includes Amplifiers (UV400), Digital Voice Recording Fee (DVR), Federal Commander® Software (SFCD10, SFCD25), UltraVoice Audio Relay Module (UVARM), and Step-down transformer (UVIC25ST).
