Introduction
This document provides essential operating instructions for the Argo THOR PLUS portable air conditioner. It covers crucial information for safe and efficient use, including setup, various operating modes, maintenance procedures, and troubleshooting tips. Please read these instructions carefully before operating the appliance or performing any maintenance work to ensure safety and prevent damage.
Key Features and Safety
- The THOR PLUS is a local air conditioner designed for domestic use.
- It utilizes R290 refrigerant, a natural gas with a low Global Warming Potential (GWP).
- Important safety warnings are provided regarding the use of R290, electrical connections, and general operation.
- The appliance can be used by children aged 8 and above, and individuals with reduced physical, sensory, or mental capabilities, provided they have supervision or instruction on safe usage.
- Always ensure proper ventilation and adhere to installation guidelines, especially regarding clearance from walls and obstacles.
Operating Modes
The THOR PLUS can operate in the following modes:
- Cooling: For lowering room temperature.
- Heating: For increasing room temperature.
- Dehumidification: To remove excess moisture from the air.
- Fan: For air circulation without cooling or heating.
- Auto: The unit automatically selects the operating mode based on room temperature.
Maintenance and Care
Regular maintenance is key to ensuring the longevity and efficiency of your air conditioner:
- Air Filter Cleaning: Check and clean the air filter every two weeks. Use a vacuum cleaner or wash with warm water and mild detergent.
- Casing Cleaning: Use a damp, soft cloth. Avoid harsh chemicals or excessive water.
- Storage: If storing for an extended period, clean the filters and keep the unit in a vertical position.
- Transport: Transport the unit in a vertical position. If horizontal transport is necessary, allow it to stand vertically for at least 4 hours before operation.
Troubleshooting
The manual includes a section on common error codes (E1, E3, E4, E8) and their solutions, primarily advising to contact a service center. It also addresses the P1 error for a full water tank.
Wi-Fi Connectivity
The THOR PLUS features Wi-Fi connectivity, allowing control via a smartphone app. Instructions are provided for downloading the control software and connecting the unit to the app.
Further Information
For detailed information on specific functions, remote control operation, and specialist maintenance procedures, please refer to the respective sections within this manual. For any issues not covered or requiring professional attention, contact an authorized Argo service center.