User Manual for BOSHIJIE models including: 2AQSK-KG-04-NA, 2AQSKKG04NA, KG-04-NA 4G CAT.1 Vehicle Terminal Device, KG-04-NA, 4G CAT.1 Vehicle Terminal Device, Vehicle Terminal Device, Terminal Device, Device
HuiZhou BoShiJie Technology CO.,Ltd KG-04-NA LORA terminal 2AQSK-KG-04-NA 2AQSKKG04NA kg 04 na
File Info : application/pdf, 9 Pages, 226.26KB
DocumentDocument4G CAT.1 Vehicle terminal device Product User Manual Product Name: vehicle positioning terminal Product model: KG-04-NA Company Name:Huizhou Boshijie Technology Co.,Ltd Address: No.1, Huifeng West 3rd Road,Zhongkai District,Huizhou city,Guangdong Province, China Contact Number: +86 13534105340 1 Content . Product composition ......................................................................................................... 1 1.1 Product overview ..................................................................................................... 1 1.2 Product picture ......................................................................................................... 1 1.3 Product configuration list .........................................................................................1 1.3.1 Standard list .....................................................................................................1 1.4 Interface Definition Of Product ............................................................................... 2 1.5 Definition Of Product Indicator ...............................................................................2 II. Parameters Of Device And Function Instructions .......................................................... 3 2.1 Parameter List Of The Device ................................................................................. 3 2.2 Function List Of The Device ................................................................................... 4 2.3 Installation Process Of Product ............................................................................... 4 2.3.1 Installation .......................................................................................................4 2.3.2 SMS Setting format ........................................................................................ 5 . Analysis of Common Problems and After-sales Service .............................................. 5 3.1 Analysis Of Common Problems .............................................................................. 5 3.2 Attention ...................................................................................................................6 3.3 After-sale service ..................................................................................................... 6 2 . Product composition 1.1 Product overview Product Name: GPS TRACKER Product model: KG-04-NA Product specifications: 89mm*44.5mm*l4.5mm 1.2 Product picture 1.3 Product configuration list 1.3.1 Standard list No Name Quantity Unit Remark 1 KG-04-NA host 1 PCS 3 Package box 1 PCS 4 Power cable 1 PCS 7 PIN 5 Velcro 1 PCS Note: The above is a standard configuration list of the whole set of products, and accessories outside the above range are subject to additional fees. 1 1.4 Interface Definition of Product No Color Interface definition 1 White ADC 6-36V 2 Green ADC 0-15V 3 Blue SOS 4 Black GND 5 Orange ACC 6 Yellow Fuel- 7 Red B+ 1.5 Definition of Product Indicator Indicator GSM (Red) GPS(Yellow) Flash quickly: GSM is in initialization Flash slowly: GSM signals is normal Bright always: GPRS is online Not Light: Not yet received the GSM signal/Not insert sim card Flash quickly: Searching GPS signal Bright always: GPS has been positioned Not Light: GPS is in dormancy/Not working 2 II. Parameters of Device and Function Instructions 2.1 Parameter List of the Device No Item Specifications 1 Working voltage DC9V-90V 2 Working current 40mA@12V(Static Current 15mA) 3 Size 89mm*44.5mm*14.5mm 4 Positioning way GPS <10 Meters (This data is for reference only, Positioning and the positioning accuracy is related to 5 accuracy factors such as the terrain and time of the vehicle) Communication 4G Cat.1 6 Network LTE Band: B1/3/5/8/34/38/39/40/41 7 LORA 868MHz 8 Communication Way TCP 9 Working Temperature -25~ +75 10 Storage Temperature -40 ~ +85 11 Standby Battery 55mA/h 12 Warranty 1 Year 13 Net Weight About 50g Remark Test Data 3 2.2 Function List of the Device Functions Location data report Vehicle status detection Other functions Low power consumption Function Details Real-time tracking ACC on/off status Power off alarm Over speed alarm Control fuel Blind area uploading data Inflection upload Upgrade remotely Static mode Description Upload the longitude and latitude information according to the time interval. Uploaded data include the ACC on/off status each time. ( you should connect the ACC cable of the car) Turn on backup battery, when the vehicle voltage is lower than 5v, the device upload a alarm to the server Set the maximum speed limit value on the platform or SMS, when the GPS speed is more than the value, the device will upload a alarm to the server Cut off/supply fuel remotely through server or SMS Stored the data in the device when the terminal is located and offline, upload this data when the signal is good When the angle of the vehicle turns is more than a certain angle, the device will upload a position information to the platform to optimize the trajectory. Need assistance of factory The 3D triaxial acceleration sensor( device built-in G-Sensor) detects vibration status of vehicle in real time, when the car is moving, the device is in motion mode; the device will change to static mode after 5 minutes without vibration, close the GPS module, when vibration is detected, the device automatically changes to motion mode. 2.3 Installation Process of Product 2.3.1 Installation Check Device Check whether the appearance of the device is good and whether the related accessories are complete. Install SIM card Open the device SIM card into the card slot. Please avoid overexertion is damaged, please make sure that a SIM card with Internet access, only at the same time satisfy the electricity and insert SIM card terminal can work normally. The position requirements of terminal installation A. Waterproof: choose place which is not easy to fill the position, kept terminal dry, pay attention to be far away from the air-conditioning outlet in case of the changes of temperature.Have condensed 4 water accumulated inside the terminal seriously affect the service life of the product. B. Shock: terminal can't hang up installed in strong vibration position for a long time. C. Tamper-proof: terminal should be away from the car video intercom and electronic equipment, such as to prevent conduction and radiation. 2.3.2 SMS Setting format Exactly format: Set IP Online: <SPBSJ*P:BSJGPS*T:120.025.232.237,7788*A:CMNET*N:13288888888*C:0030> SPBSJ: Header P: Password (Default Password: BSJGPS) T: TCP IP and Port A: APN N: Device Number C: Time Interval (Seconds) . Analysis of Common Problems and After-sales Service 3.1 Analysis of Common Problems Question Online tracking offline Cannot positioning Reason Solution SIM card not enough credit Charge credit or change SIM card contact problem Install SIM card again or change Online tracking parameter Reset Parameters with correct format according to setting error user manual Vehicle in underground car parks or tunnels, signal Go to good signal area weak. Vehicle in underground parks or tunnels car Leave that area GPS Antenna to sky side is not up Make the GPS antenna side up to sky 5 3.2 Attention 1. Electronic product please note waterproof. 2. Please keep the backup battery is enough. 3. When the temperature of the environment is more than the normal work of the terminal temperature range, advice without electricity. 4. When the vehicle in an underground parking lot, tunnel or garage, will influence the positioning signal. And possible communication network signal blind area lead to equipment can't monitor; after the vehicle out of the above areas, equipment will automatically return to normal work. 5. In abnormal situation, please do not repair itself. By linking the original attachment or unplug the connection between the various components damage, manufacturer is not liable. 3.3 After-sale service 1. During the one-year warranty, please feel free to contact us if there is any problem or damage not caused by human factors. 2. Not maintenance: (1) Client dismantled privately (2) Force majeure (floods, accidents, etc.) 3. More than one year damage or faulty maintenance will need to pay for raw material. 4. Free to provide customers with the purchase, use, installation and other consultation and technical services. 6 FCC Statement This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received,including nterference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device under Part 15 of the FCC Rules.These limits are designed to protect reasonably against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and,if not installed and used by the instructions, may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on.In that case,the user is encouraged to try to correct the interference by one or more of the following measures: (1)Reorient or relocate the receiving antenna. (2)Increase the separation between the equipment and receiver. (3)Connect the equipment to an outlet on a circuit different from the receivers. (4)Consult the dealer or an experienced radio/TV technician for help. Radio Frequency Exposure Statement The device has been evaluated to requirements.The device can be condition.The min separation distance is 20cm. meet used in general RF fixed/mobile exposure exposure 7