Dilution Solutions - Water Powered Dilution Pumps
Instruction Manual for Dilution Solutions models including: D14MZ2 IPK-14GPM Industrial Plumbing Kit, D14MZ2, IPK-14GPM Industrial Plumbing Kit, Plumbing Kit
D14MZ2 - 14 GPM - Dilution Solutions
IPK 14GPM Instructions - Dilution Solutions
File Info : application/pdf, 2 Pages, 695.06KB
DocumentDocumentFor quick priming (helpful at low water flows): Shut off outlet ball valve Insert injection hose into the chemical container Turn on the stainless steel ball valve (collect discharged solution or send it to drain) Observe the injection hose. When full, count 10 clicks Shut off stainless steel ball valve Turn outlet ball valve on For sample collection: Make sure the unit is primed Shut off outlet ball valve Turn stainless steel ball valve on In a clean container, collect 2.5 gallons of diluted solution Shut off stainless steel ball valve Collect sample out of the 2.5 gallons and check concentration Turn on the outlet valve ASSEMBLY INSTRUCTIONS IPK34 - 14 GPM Industrial Plumbing Kit For units: D14MZ2, D14MZ5, D14MZ10, and D14MZ3000 2090 Sunnydale Blvd. · Clearwater, FL 33765 · 1-800-451-6628 · 1-727-451-1198 · Fax: 1-727-451-1197 www.dilutionsolutions.com (Dosatron unit sold separately) CUSTOMER SERVICE & TECHNICAL SUPPORT 1-800-451-6628 1 Wrap all male fittings with 5 - 6 turns of Teflon tape if white, only 3 - 4 turns if pink or blue tape. 2 Install the following parts with their arrows pointing in the direction of the flow: Check valve Filter Pressure regulator 3 Attach the instruction card to the injector. Qty IPK34 - 14 GPM Includes: # 2 3/4" polypropylene single union ball valve 1 1 1/2" stainless steel ball valve 2 1 3/4" polypropylene 200 mesh tee filter 3 1 3/4" pressure regulator w/gauge 4 1 1" flow restrictor 14 GPM 5 2 1" to 3/4" reducer bushings 5 1 3/4" polypropylene check valve 6 2 3/4" union schedule 80 PVC 7 7 3/4" x 2" polypropylene fittings 8 1 1/2" x 2" polypropylene fitting 9 1 1/2" x 1/2" barb fitting 10 1 3/4" male to 1/2" female reducer bushing 11 1 3/4" Tee 12 3 3/4" street elbows 13 1 Roll of thread tape 14 1 Instruction card 15 IPK34 - 14 GPM 13 1 IN 3 8 13 8 4 5 7 6 15 OUT 78 9 1 12 11 2 10 14 When connecting a DOSATRON either to the public water supply or to its own water source, you must respect the regulations in force concerning protection of the source i.e. backflow prevention, etc. NOTE: Parts ordered, or pictured, may look slightly different than the image displayed, but the fit and function will be the same.