Audio-Technica ATN3600L User Manual

Introduction

Thank you for purchasing this Audio-Technica product. Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future reference. Use the product with the proper tracking force indicated in the specifications.

Replacing the Stylus

Follow these steps to replace the stylus:

1. Remove the replacement stylus by pulling in the direction of the arrow without touching the cantilever, stylus tip, and magnets. [Diagram A shows pulling the stylus out.]
2. Install a new replacement stylus onto the cartridge body. [Diagram B shows installing the new stylus.]

The lifetime of the replacement stylus is approximately 300 to 500 hours.

Specifications

• Tracking force: 3.0 to 4.0 g (3.5 g standard)
• Stylus: Conical bonded

Manufacturer Information

Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan

For contact information in China, Hong Kong, Macau, and Taiwan, please refer to the original manual.

©2017 Audio-Technica Corporation