Toro Greensmaster eTriFlex 3360/3370 Electric Riding Greensmowers
A NEW ALL-ELECTRIC RIDER, CHARGED WITH GREENS PERFECTION.
Introduction
The new Greensmaster® eTriFlex models offer an all-electric solution for traction, steering, lift, and cutting, eliminating hydraulic fluid. These EnergySmart® models provide operational benefits such as reduced noise, cost savings, and enhanced cutting performance. Featuring the innovative Double A-Arm Suspension System and industry-leading Flex technology, the cutting units adapt to any terrain. The Radius Dependent Speed (RDSTM) System, combined with the Lift-In-Turn cutting unit leveling, virtually eliminates "Triplex-Ring" for improved aesthetics and playability. Additional features include the patented Lift-Gate Footrest, Tool-Free QuickChange™ cutting units, Automatic "Slow-in-Turn" during transport, and Auto-Brake on Operator Dismount, enhancing versatility, serviceability, and productivity.
Key Features
All-Electric Traction, Steering, Lift & Reel Control
- No onboard hydraulic fluid
- Engine/Generator Model (3360): 10.4 kW TWIN Cylinder Kawasaki® with Battery Assist Technology, offering up to 20% fuel savings*. Features a constant 2,400 rpm and shrouded engine for quiet operation.
- Lithium-Ion Battery Model (3370): 48-Volt Samsung® battery ? for virtually silent operation.
Radius Dependent Speed (RDS) System for Optimal Perimeter Cut ★
- Clip Rate: Maintains consistent cutting unit clip rate in turns on each individual reel.
- Wheel Speed Control: Individual wheel speed control during turns to reduce wheel scrubbing.
- Lift-In-Turn: Provides a level cut from side to side, regardless of turning angle, particularly in turns.
Advanced Cutting Performance
- Double A-Arm plus Link-System Suspension for superior contour-following.
- Industry-leading Flex™ technology and DPA cutting units for easy adjustment and precision ★.
- Lift-In-Turn feature combined with RDS provides a consistent cleanup cut ★.
Enhanced Clippings Capture System
- Improves turf health.
- Automatically produces an even cut line across all reels when raising or lowering cutting units.
- Ample power for accessories*.
Highly Productive and Versatile
- Ample power for a wide range of applications on and off the greens.
- Robust 16 km/h transport speed with built-in "Slow-in-Turn" feature ★.
- Auto-Brake on Operator Dismount.
- Foot Operated Parking Brake.
Innovative Maintenance Enhancements
- InfoCenter™ with Advanced Diagnostics.
- Tool-Free, Quick-Change cutting units ★.
- Lift-Gate Footrest for easy access to the center cutting unit ★.
- Large, balloon-style tires gentle on turf.
★ Patented or Patent-Pending
*Verticutting with the Engine/Generator model only.
Learn more at www.toro.com.au
Specifications
Greensmaster eTriFlex 3360 (Model 04580 - Engine/Generator) vs. Greensmaster eTriFlex 3370 (Model 04590 - Lithium-Ion Battery)
| Specification | Greensmaster eTriFlex 3360 (Engine/Generator) | Greensmaster eTriFlex 3370 (Lithium-Ion Battery) |
|---|---|---|
| POWER SOURCE | Engine: Kawasaki 10.8 kW @3600 rpm, petrol, air-cooled, twin-cylinder, governed to 2400 rpm, displacement 603cc. Choke standard. Generator: 48V 5400W air cooled brushless permanent magnet motor in parallel with four 12V 33AH AGM batteries (connected in series). Generator is used to start engine. | Eight, Lithium-Ion Samsung SDI batteries ? |
| ENERGY CAPACITY | 18.5 litre petrol | 10.77 kWh; 48V nominal |
| ELECTRICAL SYSTEMS | 48V System for traction, steering motor, and cutting unit lift. 12V system for primary controls and brake actuator. | |
| DIAGNOSTICS | Basic machine diagnostics available through the InfoCenter™ | |
| POWER STEERING | 48V electric steering motor with torque feedback device ⚙️ | |
| TRACTION DRIVE | Positive 2WD traction drive: Two, brushless permanent magnet traction motors coupled to a gearbox. Optional 3WD. (patent-pending). | |
| RDSTM SYSTEM | Radius Dependent Speeds - Clip Rate: Maintains consistent cutting unit clip rate in turns on each individual reel (patent-pending). Wheel Speed Control: Individual wheel speed control during turns (patent-pending). Lift-In-Turn: Provides level cut from side to side of cutting units regardless of turning angle (patented). | |
| GROUND SPEED | Mowing 0-8 km/h; Transport 0-16 km/h; Reverse 0-4.8 km/h. Selective slow down feature for turning in mowing mode. Automatic slow down at high transport speeds when turning. | |
| CUTTING UNIT DRIVE | Three, 48V (1.1 KW), air-cooled brushless permanent magnet motors. | |
| CUTTING UNIT LIFT SYSTEM | 48V electric linear actuators with fully integrated brushless permanent magnet motor and controller. Fully sealed with splash guard. Centre lift actuator drop and raise delay is dependent on machine velocity. | |
| VERTICUTTING | Yes ✔️ | No ❌ |
| BACKLAPPING | Adjustable from 200-520 RPM | |
| CONTROLS | Traction Pedal: Forward/Neutral/Reverse; Joystick: Raise/Lower; Function control switch: Neutral, Mow, Transport; Key switch; Steering Arm Lock Pedal; Brake pedal; Parking Brake; InfoCenter; Seat Adjusting Lever; Main Power Connectors; Choke (3360 only); Fuel-Shutoff Valve | |
| INFOCENTER™ | Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake applied, reel speed setting, backlap control, clip control, calibration of 48V components. | |
| BRAKES | Traction motor regenerative braking; foot pedal service/parking brake, linear-actuated automatic parking brake. | |
| TYRES/WHEELS/PRESSURES | Three, 19x10.5x8, 4-ply rating pneumatic tubeless and demountable. Smooth tread. Tyre pressure 12-16 psi (83-110 kPa) front and rear. | |
| WEIGHT, 11-BLADE CU, BASKETS, AND STANDARD SEAT, NO FUEL | Mow: 614 kg Transport: 737 kg | Mow: 616 kg Transport: 738 kg |
| NOISE LEVEL (DBA) | Sound Power: 91 db(A) Operator Ear: 73 db(A) Bystander: 25ft - 78 db(A), 50ft - 73 db(A), 100ft - 66 db(A) | Sound Power: 82 db(A) Operator Ear: 66 db(A) |
| GROUND CLEARANCE | 9.7cm ground clearance. Three tie-down locations (2 side, 1 rear). | |
| WIDTH OF CUT | 150cm | |
| CUTTING UNIT SUSPENSION | Double A-Arm Suspension utilising sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented) | |
| QUICK-CONNECT CUTTING UNITS | Snap-on cutting unit and reel motors (no tools required) ★ | |
| OPTIONAL ATTACHMENTS | 8, 11, or 14-blade Cutting Units, Groomers, Rear Roller Brushes, Anti-Bobbing, Light Kit, Variety of Front Rollers, Thatching Reels, Tri-Roller, Spiker, Bobbing Kit, Standard or Premium Seat, Wireless Hour Metre, Bimini Shade, Bag Kit, Spark Arrestor. | |
| MAINTENANCE | No grease points | |
| OVERALL DIMENSIONS | Width: 180cm Length: with Baskets 249cm Height: 205cm Wheelbase: 126.5cm Minimum Turning Radius (to machine center line): 91cm | |
| CERTIFICATION | Meets ANSI B71.5-2017 and EU 2000.14EC (noise), 2006/42/EC (machinery safety), 2014/53/EU (red) | |
| WARRANTY | Two-year limited warranty, both models. Lithium-Ion battery 4 years (3rd and 4th year prorated). Refer to the Operator's Manual for further details. | |
*Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. Consult your local Toro Distributor.
Cutting Unit Specifications
DPA Cutting Units
These cutting units will fit on the Greensmaster eTriFlex Series.
| Specification | 8-Blade DPA Cutting Units | 11-Blade DPA Cutting Units | 14-Blade DPA Cutting Units |
|---|---|---|---|
| HEIGHT OF CUT (HOC) RANGE | Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is .062"-.297" (1.6-7.5 mm). With high HOC kit, range is 7.5-25.4 mm. Effective HOC may vary depending on turf conditions and bedknife installed. | ||
| REEL WELDMENT | Reels are 13 cm in diameter, 53.3 cm in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief grind. | ||
| REEL BEARINGS | Two stainless steel ball bearings, 30 mm inside diameter slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut. | ||
| MAINTENANCE | No grease zerks, sealed bearing design eliminates daily maintenance. | ||
| REEL DRIVE | The reel weldment shaft is a 35 mm diameter tube with internally splined threaded insert. | ||
| FRAME | Precision machined, die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. | ||
| AGGRESSIVENESS | Aggressiveness stays constant throughout the life of the reel. Adjustable, with new roller spacers. Patented design. | ||
| BEDKNIFE | Replaceable single edged, EdgeMax™ Microcut Bedknife is standard on all cutting units. | ||
| BEDKNIFE ADJUSTMENT | Dual screw, indexed "click" adjustment to the reel; detents correspond to .018 mm bedknife movement for each position. | ||
| FRONT & REAR ROLLERS | Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 2" (5.1 cm) diameter with sealed bearings and through-shaft. | Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 2" (5.1 cm) diameter with sealed bearings and through-shaft. | Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 2" (5.1 cm) diameter with sealed bearings and through-shaft. |
| GRASS SHIELD | Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions. | ||
| TOTAL WEIGHT | 8-blade: 30.4 kg with aluminum Wiehle Roller. | 11-blade: 37.7 kg with aluminum Wiehle Roller. | 14-blade: 39 kg with aluminum Wiehle Roller. |
Accessories
Triflex Traction Unit Accessories
| Part Number | Description |
|---|---|
| 04503 | 3WD Kit |
| 04500 | Light Kit |
| 04508 | Seat Kit, Standard |
| 04729 | Seat Kit, Premium |
| 121-3660 | Left Armrest Kit - Standard |
| 119-7105 | Armrest Kit - Premium |
| 137-8098 | Spark Arrestor Kit (Gas) |
| 115-4510 | Canopy |
| 137-8130 | Utility Bag Kit |
| 115-4754 | Wireless Hour Meter |
Optional Triflex Accessories
| Part Number | Description |
|---|---|
| 04720 | Thatching Reel - TriFlex (set of 1) for model 04580 only |
| 119-1128 | Individual dynaBLADE, 2mm thickness |
| 117-6824 | Individual dynaBLADE, 1.2mm thickness |
| 117-6839 | Replacement dynaBLADE kit, 1.2mm thickness (36 blades) |
| 117-6840 | Replacement dynaBLADE kit, 2mm thickness (36 blades) |
| 121-6674 | Individual Spring Steel Blade |
| 121-6675 | Replacement Spring Steel Blade Kit (36 pcs) |
| 04722 | Greens Tri-Roller - TriFlex (set of 1) |
| 04723 | Greens Spiker - TriFlex (set of 1) |
Greensmaster eTriFlex Accessories
Triflex DPA Cutting Units
| Part Number | Description |
|---|---|
| 04651 | 8-Blade Cutting Unit |
| 04653 | 11-Blade Cutting Unit |
| 04655 | 14-Blade Cutting Unit |
Triflex DPA Cutting Unit Rollers
| Part Number | Description |
|---|---|
| 04625 | Full Roller DPA |
| 04626 | Narrow Wiehle Roller DPA |
| 04627 | Wide Wiehle Roller DPA |
| 04258 | Extended Wiehle Roller |
| 04267 | Narrow Wiehle Roller (for paspalum) |
| 04249 | Full Split Roller |
| 04250 | Wiehle Split Roller |
| 04628 | Solid Steel Roller Kit (Front Wide Wiehle, Rear Full) |
| 04716 | Anti Bobbing Kit |
| 71-1550 | 2" Rear Wiehle Roller (cast iron) |
| 125-5180 | Rear Roller Extension Kit |
| 120-9600 | High Height of Cut Kit (.35 - .94) |
Triflex DPA Cutting Unit Accessories
| Part Number | Description |
|---|---|
| 04648 | Universal Groomer Drive |
| 04802 | Groomer Reel - Twin Tipped |
| 04270 | Grooming Brush, Soft |
| 04271 | Grooming Brush, Stiff |
| 04650 | Rotating Rear Roller Brush |
| 115-1880 | EdgeMax™ Microcut Bedknife |
| 115-1881 | EdgeMax™ Tournament Bedknife |
| 93-4262 | Microcut Bedknife (HOC Range 1.58mm - 3.18mm) |
| 93-4263 | Tournament Bedknife (HOC Range 3.2mm - 6.35mm) |
| 93-4264 | Low Cut Bedknife (HOC Range 6.35mm and higher) |
| 94-6392 | Bedknife - High Cut |
| 108-4303 | Extended Microcut Bedknife |
| 108-4302 | Extended Tournament Bedknife |
| 63-8600 | Bedknife - Fairway |
| 99-3794-03 | DPA Bedbar, Aggressive (optional) |
| 106-2648-01 | DPA Bedbar, Less Aggressive (standard equipment) |
| 112-7475 | EdgeMax™ Fairway Bedknife |
Triflex DPA Cutting Unit Roller Scrapers / Brushes / Combs
| Part Number | Description |
|---|---|
| 04646 | Rear Roller Scraper (Spring Loaded) |
| 125-3503 | Front Wiehle Roller Scraper - Narrow |
| 125-3504 | Front Wiehle Roller Scraper - Wide |
| 125-3505 | Front Roller Scraper - Full |
| 115-7377 | Front Wiehle Roller Scraper Brush - Narrow |
| 115-7378 | Front Wiehle Roller Scraper Brush - Wide |
| 115-7379 | Front Roller Scraper Brush - Full |
| 115-7380 | Front Wiehle Roller Scraper Comb - Narrow |
| 115-7381 | Front Wiehle Roller Scraper Comb - Wide |
| 115-7382 | Front Roller Scraper Comb - Full |
| 107-9561 | Anti Bobbing Roller - Scraper Kit (Front and Rear) |
| 121-2260 | Rear Roller Scraper - Adjustable |
Tools
| Part Number | Description |
|---|---|
| 04399 | Turf Evaluator |
| 125-5610 | Paper - Reel |
| 125-5611 | Shim - Reel |
| 94-9010 | Height of Cut Bar Assembly |
