Govee RGBIC LED Strip Lights H617A User Manual

Safety Instructions

Read and follow all the safety instructions:

• The product is not water resistant; be cautious when installing and using.
• Use the product with the provided power adapter only.
• Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
• When bending the strip lights during installation, avoid folding the LED components as it may affect the product's lifespan.
• Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting.
• Do not install the strip light near any heat sources.
• Do not allow children to install the strip light alone.
• Avoid installing the strip light near potentially dangerous sources (e.g., candles, liquid-filled objects).
• Unroll the strip lights before powering them on.

Introduction

Thanks for choosing the Govee RGBIC LED Strip Lights. This product is equipped with a 5m RGBIC strip light and supports app control. RGBIC is Govee's latest lighting display technology. With its advanced IC chips (independent control), each strip light segment can be adjusted independently, creating vibrant rainbow effects.

What You Get

• LED Strip Lights (1)
• Adapter (1)
• User Manual (1)
• Service Card (1)

At a Glance

The control box features several buttons for basic operation:

• [Power Button] Turn the light on/off.
• [Color Cycle Button] Press to cycle through 9 colors.
• [Music Mode Button] Press to enter music mode.
• [Brightness Button] Press and hold to cycle through 6 brightness levels.

Installing Your Device

Before You Install

• 1. Unpack the box and check all items listed in the packing list.
• 2. Power on the strip light and check whether it lights up.

Installing Steps

1. Wipe the surface to make sure it's clean and dry.
2. Peel off the protective film on the tape, stick the strip on and press over it firmly.
3. Peel off the protective film on the control box and stick it on. Place the control box close to the music source to achieve the best music effect.
4. Power on the strip lights and start using.

Pairing Your Device with the Govee Home App

Pairing Instructions

1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
2. Turn on Bluetooth on your smartphone.
3. Open the app, tap the "+" icon in the top right corner and search for "H617A".
4. Tap the device icon and follow the on-screen instructions to complete pairing.

For FAQs and more information, please visit: www.govee.com

QR code for app download excluded.

Specifications

Troubleshooting

Issue: Lights do not turn on.

• Ensure the power adapter is securely connected to the strip light and the power outlet.
• Check if the power outlet is functioning.
• Verify the control box is correctly connected to the strip light.

Issue: App cannot connect to the device.

• Make sure Bluetooth is enabled on your smartphone.
• Ensure the device is within Bluetooth range.
• Try restarting the Govee Home app and your smartphone.
• Confirm you are searching for the correct model "H617A".

Issue: Colors are not displaying correctly.

• Check the connections between the strip light segments.
• Ensure the strip light is not damaged or bent excessively.

Customer Service

For assistance or inquiries, please contact Govee Customer Service:

• Website: www.govee.com/support
• Email: support@govee.com
• App: Access Help Center via the Govee Home app.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible de compromettre le fonctionnement. This device complies with FCC and ISED Canada RF radiation exposure limits set forth for an uncontrolled environment.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and ISED Canada RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.