User Manual for Lotus Lantern models including: 2BPVW-RGB, 2BPVWRGB, Software App button type RGB Light Strip, App button type RGB Light Strip, RGB Light Strip, Light Strip, Strip
Changzhou Changyuan Lighting Technology Co., LTD. RGB Changyuan brand APP button type RGB light strip 2BPVW-RGB 2BPVWRGB rgb
LotusLantern APP Manual 1. Software Overview 1.1 Overview LotusLantern is a mobile APP to control LED strip by both Apple and Android phones. The traditional control ways like infrared, 433MHz, 2.4GHz and others old wired ways will be replaced by mobile phone control way with convenient, powerful and scalable features. Through this mobile APPyou can not only control the color, brightness and color temperature of the LED strips but also set up all kinds of fancy flash modeAlso this APP can change the light of the LED strip according to the rhythm of the music. This APP can set and control several LED strips through Bluetooth and the operation is very simple, easy to learn and easy to use. 1.2 Features Adjust color LED strips with 60,000 colors to change color and brightness and adjust monochrome LED stips to change brightness and color temperature Play music or turn on a sound playback device, you can let the light change the color and brightness with the rhythm of music, the music rhythm beautiful Inside multiple setting mode for color change and control LED strips without mobile Long distance control with omni-directional antenna, and many-to-many group control mode Once the connection is successful, connect automatically next time 1.3 Performance LotusLantern APP is easy for use as well as great compatible for all kinds of smart phones; After the actual test of hundreds of mobile phones verification, the compatibility is above 95% of mobile phones in the market. APP is small and convenient, it consumes less system resources, so the requirements of the mobile configuration are low. Control delay is small, the operation feel good, light control is smooth with people's visual sense. 2. Operating Environment This APP program requires phones of system above Andriod 4.3 and iOS 8.0. Mobile phone configuration is not limited. 3. Instuctions Note: Android version and iOS version download and use the same method, here in the Android version as an example. 3.1 APP Download Scan the QR code iOS and Android systems can download the "LotusLantern" APP by scanning the QR code. Open the browser or other tools with "Scan QR code" function, scan the "LotusLantern" QR code as below: 3.2 App Operation (1) Click on the LotusLantern APP icon, enter the APP page: (2) After entering the APP interface, if Bluetooth is not enabled, "Louts Lantern wants to turn on Bluetooth." Click [Allow] (3) switch to color and brightness interface: Click to show the lamp Switch the color wheel Click to display setting Lamp switch button Display the RGB value Click to manual adjustment view Click to shift the Adjust the Click square icon to adjust the color 4click to show the lamp list, view lamp list: Bluetooth auto connect after search for Lamp list Status of device Device disconnected state 5Click to RGB manual adjustment view: 6switch to the mode interface: Scroll the selection Adjust seed Adjust luminance 7switch to the music rhythm interface: Previous song, Pause/Play, Next song Recycle mode Music List 8Switch to the microphone rhythm interface: Music rhythm through cell phone microphone Switch phone microphone and external microphone Music rhythm through the microphone on the product Switch phone microphone and external microphone 9Switch to the schedule interface: Set the time of Light- Set the time of Light- 4-style rhythm Change the sensitivity of MIC to match the Enable or disable the Light-On Repeat setting No selection for once Light-On Enable or disable the Light-Off Repeat setting No selection for once LightOff 10 Switch to the modify pin sequence interface: Click to save the new assignment Change the real color of this line Compliance FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compl i anceWPS 文字