nVent LENTON Cadweld Filler Material, 0.19 KG

Catalog Number: RBF15

Product Description

The nVent LENTON Cadweld filler material is a proprietary blend of iron and aluminum. Each bag of filler material is sized for a specific pouring basin, sleeve, and reinforcing steel combination. It contains a tube of starting powder used to initiate the exothermic reaction.

A bag of nVent LENTON Cadweld filler material, weighing 0.19 KG. The bag is depicted as yellow and green with black text and logos, including 'CADWELD' and 'ERICO'. It is made of heavy-duty plastic.

Features

Non-explosive
Not subject to spontaneous ignition
Supplied in heavy-duty plastic bags

Product Attributes

Unit Weight: 0.190 kg

Additional Product Details

Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.

Warning

nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

Contact Information

North America

+1.800.753.9221

Option 1 - Customer Care

Option 2 - Technical Support

Europe

Netherlands: +31 800-0200135

France: +33 800 901 793

Germany: 800 1890272

Other Countries: +31 13 5835404

APAC

Shanghai: + 86 21 2412 1618/19

Sydney: +61 2 9751 8500

	nVent LENTON Cadweld Filler Material RBF180 - Product Information Information on nVent LENTON Cadweld filler material, a proprietary blend of iron and aluminum, for rebar splicing. Includes product details, safety notices, and contact information.
	nVent T-Series Vertical Filler Material Kit, 32 mm, #10 Product overview of the nVent T-Series Vertical Filler Material Kit (RBT1091B), designed for splicing 32 mm (#10) rebar. Details include kit contents, features, product attributes, component compatibility, and important safety information.
	nVent CADWELD Flint Ignitor T320 - Product Overview and Specifications Detailed information on the nVent CADWELD Flint Ignitor, model T320. This product is used to ignite starting material for nVent ERICO Cadweld and nVent LENTON Cadweld rebar connections. Includes features, warnings, and regional contact information.
	nVent LENTON Crucible Cover 10.32" - Product Information Details on the nVent LENTON Crucible Cover, 10.32", including its features, product attributes, and application. Made from heat-resistant graphite, it protects operators from heat and sparks during reactions.
	nVent LENTON Terminator Mechanical Anchor Installation Guide Official installation instructions for the nVent LENTON Terminator mechanical anchor, including torque specifications, SNUG Tight guidelines, warnings, and safety information for the Americas region.
	T-Series Vertical Splice Kit, 32 mm, #10 - nVent Details on the nVent T-Series Vertical Splice Kit for 32 mm (#10) rebar, including components, features, and ordering information. This kit simplifies rebar splicing and is available with extended sleeve lengths.
	nVent LENTON Bottom Support Clamp, Horizontal Side - Product Overview Detailed information on the nVent LENTON Bottom Support Clamp for horizontal side fill applications, including features, specifications, and diagrams.
	Nvent Lenton Interlok Position Transition Grout-Fill Coupler \| Technical Specifications Detailed technical specifications, features, and compliance standards for the Nvent Lenton Interlok Position Transition Grout-Fill Coupler, designed for splicing different diameter rebar. Includes model numbers LK1110STHD and LK1411STHD.