CIRCRANE Wireless Forehead Thermometer Instruction Manual

Product Overview

CIRCRANE Wireless Forehead Thermometer. To ensure you have the best possible product performance, please read this manual carefully. Keep it handy and remember to retain it for future reference.

CIRCRANE

CIRCRANE Wireless Forehead Thermometer Instruction manual

SH-PT-002

Compare with your new CIRCRANE product. To ensure you have the best possible product performance, please read this manual carefully. Keep it handy and remember to retain it for future reference.

Instructions and Specifications

1. Unpacking Instruction

Thank you for purchasing the CIRCRANE Wireless Forehead Thermometer. Please check the package contents against the list below. If any items are missing or damaged, please contact your dealer immediately.

2. Package Contents

• CIRCRANE Wireless Forehead Thermometer
• User Manual
• Quick Start Guide

3. Features & Specifications

3.1 Forehead Thermometer (Main Unit)

• LCD Display: Shows temperature readings, battery status, and mode indicators.
• Measurement Button: Press to take a temperature reading.
• Mode Button: Switches between forehead and object temperature modes.
• Power Button: Turns the device on/off.
• Battery Compartment: Located at the back of the device.

3.2 Forehead Thermometer (Details)

• LCD Display: Displays temperature in Celsius (°C) or Fahrenheit (°F).
• Temperature Unit Indicator: Shows the selected unit (°C or °F).
• Battery Indicator: Shows the remaining battery power.
• Memory Icon: Indicates when stored readings are available.
• Measurement Button: Initiates temperature measurement.
• Mode Button: Toggles between forehead and object measurement modes.
• Power Button: Powers the device on or off.
• Sensor: Position this part towards the forehead for accurate readings.

Operation Instructions

4. Operation Instruction

4.1 Temperature and Humidity (Forehead)

• Turn on the device: Press the Power Button.
• Select Mode: Ensure the device is in forehead mode (indicated by a forehead icon on the display).
• Position the device: Hold the thermometer approximately 3-5 cm (1.2-2 inches) away from the center of the forehead.
• Take measurement: Press the Measurement Button. The temperature will be displayed on the LCD screen.
• Read the result: The temperature reading will appear on the screen.
• Turn off the device: Press and hold the Power Button, or the device will automatically turn off after a period of inactivity.

4.2 Forehead Thermometer (Object Mode)

• Turn on the device: Press the Power Button.
• Select Mode: Press the Mode Button until the object icon is displayed.
• Position the device: Aim the sensor at the surface of the object you wish to measure, from a distance of approximately 3-5 cm (1.2-2 inches).
• Take measurement: Press the Measurement Button. The temperature will be displayed on the LCD screen.
• Read the result: The temperature reading will appear on the screen.

5. Memory Function

The thermometer can store up to 32 previous readings. To access stored readings, press the Mode Button when the device is on, cycling through the memory recall function.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Compliance Marks:

FC, CE, RoHS, Recycling Symbol ♻️