Lumos Helmet
User Guide for Lumos models including: Firefly Mini Light, Firefly Mini, Light
Lumos Firefly Mini
Use the silicone bands provided to mount your Mini Universal Mount if flexibility is desired. For more information, visit fireflymini.ridelumos.com. Carefully ...
File Info : application/pdf, 1 Pages, 234.04KB
DocumentDocumentLUMOS FIREFLY MINI USER GUIDE INSTALLING FIREFLY MINI Use cable ties for added security Use silicone rings for versatility Firefly Mini Slim padding Universal mount Wide or slim padding Bicycle stem QUICK START GUIDE TO TURN ON YOUR FIREFLY MINI The Mini's power button has 3 functions: Power button · Long Press- From an Off state, it will enter pairing mode. From an On state, it turns off the device. · Single press- Powers on Firefly Mini AND cycles through flash patterns (from an On state). · Double press- Sync flash patterns and tempo to other devices (Mini, Firefly, Helmet) For more information, visit fireflymini.ridelumos.com MOUNTING OPTION 2 CABLE TIES Handlebar Wrap the cable ties around the desired mounting surface and insert it into the other end of the cable tie's head to secure it. Tighten it as securely as possible before cutting off any excess cable end. For more information, visit fireflymini.ridelumos.com ACCESSORIES: VERSA CLIP Press Attach the Versa Clip onto your desired mounting surface such as backpacks, pannier bags, shirts, and pet collars. Carefully snap the Firefly Mini onto the Versa Clip via the hooks on its sides. For more information, visit fireflymini.ridelumos.com HELMET PORT ADAPTER Firefly Mini snapped into Helmet Port Adapter Helmet Carefully snap the Firefly Mini onto the Helmet Port Adapter via the hooks on its sides and magnetically snap it into a Lumos Ultra Fly or Ultra Fly Pro helmet For more information, visit fireflymini.ridelumos.com FIREFLY MINI CHARGING INDICATORS Charging indicator Charging port The Mini comes with 3 LED lights that denote different states of charging: Red - Firefly Mini is charging. Green - Firefly is fully charged. Blue - Mini has temporarily paused charging due to having exceeded optimal temperatures*. For optimal charging, charge in ambient temperatures of <=86°F. If charging gets too hot, Firefly Mini will temporarily stop charging to protect itself from overheating. Charging will automatically resume once it has cooled down sufficiently. PAIRING FIREFLY MINI Step 1: Hold until breathing Step 2: Turn on Bluetooth Step 3: Open Lumos app Step 4: Add new device Tap to pair Step 5: Tap to pair Step 6: Done pairing Im done pairing For more information, visit fireflymini.ridelumos.com IDENTIFY YOUR FIREFLY MINI AT A GLANCE UNLOCK YOUR ECOSYSTEM Download the Ride Lumos App to unlock the full potential of Firefly R Sticker Slim adapter All Lumos Firefly Mini come with a set of navigational stickers to tell all your Firefly Mini lights apart. When using multiple Firefly Mini lights in your setup, place the sticker corresponding to its profile in the indentation of the slim adapter. For more information, visit fireflymini.ridelumos.com Enabling brake lights and turn signals Configuring sync settings Assigning Firefly Mini command profiles Automatic off capability For more information, visit fireflymini.ridelumos.com SYNCING FIREFLY MINI Ride Sync: Syncing Firefly Mini To sync your flash pattern across all devices, please double tap the main device you'd like the others to follow suit. For example, if you would like your Mini's pattern to sync to your helmet and Firefly, simply double-tap your Mini. For more information, visit fireflymini.ridelumos.com SPECIFICATION OF RADIO TRANSMISSION Product:Lumos Firefly Mini Model Number: LBLFFMN Power Output: 0.6W Charging Input: 0.7W Hereby, Lumos Labs International Pte Ltd. declares that the radio equipment type Lumos Firefly Mini is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: lumoshelmet.co/EU_DOC IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic DevelopmentCanada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des émetteurs/récepteurs exemptés de licence qui sont conformes aux flux RSS exemptés de licence de Innovation, Science et développement économique Canada. L'exploitation est soumise aux deux conditions suivantes: (1) cet appareil ne doit pas causer d'interférences. (2) ce dispositif doit accepter toute interférence, y compris toute interférence susceptible de provoquer un fonctionnement indésirable du dispositif. FCC - Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. MOUNTING OPTION 1 SILICONE BANDS Use the silicone bands provided to mount your Mini Universal Mount if flexibility is desired. Silicone band Insert a silicone band of suitable length into one of the hooks on the Mini Universal Mount. Stretch the band around the desired mounting surface and attach it to the other hook of the Mini Universal Mount. For more information, visit fireflymini.ridelumos.com MOUNTING OPTION 2 - CABLE TIES Use the cable ties provided to mount your Mini Universal Mount as an extra secure, low profile and semi-permanent use case. The arrows inside the slot indicate which direction the cable ties should go. Cable tie head sit snugly here Insert the cable ties through the slots on the Mini Universal Mount. The cable tie head should fit snugly within the slot and be completely concealed. For more information, visit fireflymini.ridelumos.com These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Importer in Switzerland: Bucher et Walt SA Route de Soleure 8 CH-2072 St-Blaise Switzerland +41 32 755 95 00 Importer in Canada: Cycles Lambert Inc. 1000 Rue des Riveurs Lévis QC G6Y 9G3 Canada Importer in the USA: Lumen Labs Inc. 4550 New Linden Hill Road, Suite 201, Wilmington, DE 19808 (617) 528-9968 Importer in Finland: Oy Hunterri Ab Lukkosepänkatu 4 Turku 20320 Finland Importer in Denmark: Søndergård & Sønner A/S Fabrikvej 3 8260 Viby J Denmark +45 86 28 10 22 Importer in Norway: Deler AS Hestehagen 4 NO-1448 Drøbak Norway Importer in Spain: Athena Motor Ibérica, S.L. C\Joiers nº17, Nave 7 08184- Palau Solità i Plegamans Barcelona Spain Importer in the Philippines: Liberty & Co. 20 Talisay Road Barangay Forbes Park Makati City 1219 Philippines Importer in Singapore: Kian Hong Cycle Pte Ltd 13 Kaki Bukit Road 1 #02-08 Eunos Technolink Singapore 415928 +65 6749 5787 Importer in Malaysia: KHcycle Malaysia Sdn Bhd No. 9, Jalan PJU 3/48, Sunway Damansara Technology Park, 47810 Petaling Jaya, Selangor, Malaysia +603 7865 2188 Importer in the Netherlands: Lumos Labs International Pte Ltd T.A.V HB VAT Services B.V. Kade 42A 3371 EP Hardinxveld-Giessendam Importer in Germany: GROFA® Action Sports GmBH Otto-Hahn-Straße 17 Bad Camberg 65520 Germany +49 6434 2008200 Importer in Italy: ATHENA S.p.a. Via Delle Albere, 13 36045 Alonte Vicenza Italy sportech.support@athena.eu Importer in the Czech Republic: Schindler, spol. s r.o. Stpánkovická 950 / 23, Kravae, 74721 Czechia info@schindler.cz Importer in Indonesia: PT. KHcycle Inodonesia Internasional Ruko the Prominence, Jl. Jalur Sutera 38D, No. 5 Alam Sutera Tangerang City 15143 Indonesia +6222-30052581 Importer in the UK: Lumos Labs International Pte Ltd Unit I, Hove Technology Centre St Josephs Close Hove East Sussex