Zinc Velocity+ Folding E-Scooter
Model: Velocity+ | Colour: Silver | Product Code: 206/2792
Important Safety Information
[!] Read this manual carefully before use. Failure to follow safety guidelines may result in serious injury.
- Always wear a helmet and protective gear.
- Ensure the scooter is suitable for your age and weight.
- Check local regulations regarding electric scooter use.
- Do not ride in wet conditions or on uneven surfaces.
- Keep hands on the handlebars at all times.
Getting Started
Unpacking and Assembly
Carefully unpack all components. The scooter may require minimal assembly, such as attaching the handlebars.
Step 1: Insert the handlebar stem into the steering column.
Step 2: Secure the handlebars using the provided bolts and Allen key. Ensure they are tightened firmly.
Step 3: Check that all connections are secure before operation.
[Diagram: Illustration showing the handlebar being attached to the steering column.]
Operation
Charging the Battery
Before first use, fully charge the battery. Connect the charger to the charging port on the scooter and plug it into a wall socket.
Charging Indicator: The indicator light will turn red while charging and green when fully charged.
[Diagram: Location of the charging port and charger connection.]
Riding the Scooter
Power On: Press the power button located on the handlebar display.
Acceleration: Gently push off the ground with one foot and then press the throttle lever. The scooter will begin to move.
Braking: Release the throttle and apply the brake lever. For emergency stops, use the rear fender brake.
Folding: Follow the steps to fold the scooter for portability or storage. [Diagram: Steps for folding the scooter.]
Speed Modes: The scooter may feature different speed modes, selectable via the handlebar display.
Maintenance and Care
Regular maintenance ensures the longevity and safety of your scooter.
- Keep the scooter clean and dry.
- Check tire pressure regularly.
- Inspect brakes and tighten any loose bolts periodically.
- Store in a cool, dry place when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter not powering on | Battery is depleted. | Charge the battery fully. |
| Weak acceleration | Battery charge is low. | Charge the battery. |
| Brakes not effective | Brake pads worn or misaligned. | Adjust or replace brake pads. Consult manual for details. |
Specifications
- Max Speed: [Specify speed, e.g., 25 km/h]
- Range: [Specify range, e.g., 30 km]
- Motor Power: [Specify power, e.g., 250W]
- Battery: [Specify battery type/capacity]
- Weight: [Specify weight, e.g., 12 kg]
- Max Load: [Specify load, e.g., 100 kg]
- Tire Size: [Specify size, e.g., 8-inch]
[Diagram: Visual representation of the scooter's dimensions.]
