User Guide for OOB models including: VDPS2, VDPS2 Video Door Phone, Video Door Phone, Door Phone, Phone

Installation Manual - Video Door Phone - S2 - 21-03-2024

OOB-CPU-003

Installation Manual - Video Door Phone - S2 - 21-03-2024

www.oobsmarthome.com VIDEO DOOR PHONE OOBVDPS2 SERIES - 2 VIDEO DOOR PHONE Quick Start Guideline Please read it carefully before using the product, and keep this handy

Installation Manual - Video Door Phone ...


File Info : application/pdf, 6 Pages, 2.21MB

PDF preview unavailable. Download the PDF instead.

OOB VDP Series 2
VIDEO DOOR PHONE
OOBVDPS2
SERIES - 2 VIDEO DOOR PHONE
Quick Start Guideline
Please read it carefully before using the product, and keep this handy
www.oobsmarthome.com

WHAT'S IN THE BOX
Please consult below checklist for all the components.

Video Doorbell

User Guide

Screws & Tools

MEET THE DOORBELL
IR LED Light Sensor
MIC Button

Lens PIR

www.oobsmarthome.com

BATTERY INSTALLATION
The batteries are pre-installed into the doorbell. If you had taken out the batteries, please note the electrodes when install them back. Do put the positive poles upward!
NOTE: Improper battery installation will cause damage to the internal components and may result in serious injury.
BATTERY CHARGING
The batteries inside the video doorbell are not fully charged in accordance with transportation safety regulations. Please charge the batteries with an USB compatible wall charger(not included in the box) and the provided USB cable for around 8~10 hours prior to Wi-Fi set up and installation.
Press 5 Second for Reset Doorbell
www.oobsmarthome.com

APP DOWNLOAD
1. Downloading and installing the APP
Download and install the 'SmartLife' app from Google PlayTM or the App StoreTM The app is also available by scanning below QR codes, using your QR code scanner in your smart phone.
Smart Life
2. Setting up the APP
Before you begin; Make sure the APP is installed to your device Make sure that your device is connected to a 2.4GHz Wi-Fi networks, 5GHz network is NOT compatible.
User Register
New user register it according to guide steps, already registered user just login it
3. Add the device
Before add, turn on the bluetooth on the mobile setting. Open the app and tap "Add device" Select device: Smart Doorbell Camera, and it will show the WiFi network setting. the name of the WiFi network will automatically be filled in, enter the WiFi password and tap "Next step" and confirm.
www.oobsmarthome.com

STEP - 1

STEP - 2

STEP - 3

STEP - 4

STEP - 5

STEP - 6

STEP - 7

STEP - 8

www.oobsmarthome.com

UQ-3514

VERSION V3



References

CorelDRAW X7 iLovePDF