Introduction
This manual provides instructions for the Bass Jax Faux Fur Earmuffs Wireless Headphones (Model HP-1033B). It guides users through setup, operation, and safety precautions.
Getting Started
Pairing Instructions
To connect your headphones to a mobile phone or other Bluetooth device:
- Ensure Bluetooth is activated on your device.
- Turn on the headphones and enter pairing mode.
- Search for "HP-1033B" on your device and select it to pair.
Charging the Headphones
Use the provided USB Type-C cable to charge the headphones. Connect the USB Type-C end to the headphones and the USB end to a 5V/1A USB power source. The LED indicator turns red while charging and off when fully charged. It is recommended to charge for at least 2 hours before initial use.
Product Specifications
- Driver Diameter: 40 mm
- Impedance: 32 Ohms
- Frequency Response: 20 Hz - 20 kHz
- Sensitivity: 100 dB +/- 3 dB
- Battery: Li-ion 3.7V 200 mAh
- Playtime: 4-5 Hours
- Charging Time: 1.5 - 2 Hours
- Bluetooth Range: 32 ft. (10 m)
- Bluetooth Version: 5.3
Safety and Compliance
Users are advised to follow safety rules outlined in the manual, including avoiding modifications, using appropriate chargers, and handling the lithium battery with care. The product complies with FCC Part 15 rules.
Distributed by 1616 Holdings, Inc.
