User Manual for Xiaomi models including: KC101, SWDK Wireless Handheld Vacuum Cleaner, Handheld Vacuum Cleaner, Vacuum Cleaner, KC101, Cleaner

图形1

Загрузить

Купить Ручной пылесос Xiaomi SWDK Wireless Handheld Mite Cleaner KC101 в Москве: цена, характеристики, отзывы, обзор, фото

UV Vacuum Cleaner User Manual

PDF preview unavailable. Download the PDF instead.

KC101
190mm

UV Vacuum Cleaner User Manual

H
3

KC101

3

c :i!Jj  I
Please read this instruction manual carefully before using the product and keep it properly.

Important safety instruction

Product Description

3

Operating Instruction

5

Cleaning & Maintenance

7

Trouble Shooting

9

Technical Parameters

10

Company Information

12

Important safety instruction
About this user manual
·Please read all the contents of this manual carefully before using this product. ·Keep this manual in a safe place. If you transfer the product to a third party, please attach
this manual together with the machine. ·Any operation that does not comply with the instructions of the manual may result in
serious personal injury, property damage or damage to the product itself. ·Our company does not bear the relevant legal liabilities for losses caused
by failure to follow the instructions in this product description.
Attention A
This product is not waterproof, please do not inhale water and damp dust.
This product is a household bed smashing device. Do not use it to absorb construction waste or heavy metal dust.
Personnel Safety
·For instructions on your personal safety, please read these carefully to avoid accidents and possible damage to the product. ·This product is not intended for use by people who have no experience and knowledge of bed mites, including children
at home, unless they are supervised and responsible for their safety ·When working on the product, please be careful to avoid danger. ·Do not stand or sit on this product. ·Keep this product in a safe place, and keep it out of reach of children and those who are unable to judge the environmental risks. ·Do not store this product in a high place to avoid the risk of accidental fall.

Product safety instructions

· This product is not intended for use by persons with physical, sensory or intellectual disabilities or those who lack experience and common sense (including children) unless they
are supervised or directed to ensure that they are safe to use. · This product is only suitable for working in a dry environment. Do not use it in a humid environment. · Do not pump high temperature substances (cigarettes, matches or hot ash), ultra-fine materials (such as lime, cement, wood chips, gypsum powder, ash, toner, etc.), large pieces of sharp pieces (such as glass, nails, pins, etc.) , dangerous goods (such as solvents, detergents, etc.), chemicals (such as acidic substances, detergents, etc.), flammable and explosive liquids (gasoline, alcohol products)

·This product is a power tool. Do not let the wireless vacuum cleaner run alone without being taken care of. ·Avoid getting the vacuum cleaner close to the heating appliance or violent to avoid a fire. ·Do not disassemble the dust cup, the UV lamp cover and open the air hood when the machine is powered or running to avoid injury or machine damage ·If the adapter is damaged, you need to purchase the original adapter
Warning About UV Rays

· Keep the crystal flow passage and moving parts away from the hair, loose clothing, fingers and body parts. Do
not point the air passage or tool at the eyes or ears. · Please check the clear area before use. If you find tall paper, paper balls, plastic cloth or sharp objects, and
things that are thicker than the straw diameter, please
pre-exclude it to avoid the use of the pipeline is blocked
and the use is severe · If it is found, if it is found to be leaking or the motor temperature is too high and abnormal sound, such as hot body, abnormal sound, different sputum, weak service, etc., should stop immediately. · Please check the dust cup regularly. If there is more garbage inside, please clean it up in time, keep the
ventilation hole unobstructed to avoid the blockage and
cause the force to drop. The motor will start the ship and
reduce the service life of the hand-held wireless dust
collector · When cleaning the crystal, do not use lubricants, detergents, polishes, etc. to clean any parts. · When the machine malfunctions, do not repair it
yourself. Please call our after-sales department for assistance

· This product is equipped with ultraviolet sterilizing lamp, please
avoid to watch the bottom of the machine when the power is on and
the ultraviolet sterilizing function is on to prevent ultraviolet
radiation from causing harm to human body · Please don't expose animals and plants to ultraviolet rays to avoid damage
· Please do not concentrate uv rays in one place for continuous use, which may cause damage to cleaning objects
· When the ultraviolet sterilization lamp is opened, the eye cannot direct the ultraviolet ray lamplight, also cannot illuminate human body skin, lest cause damage to human body. · Ultraviolet germicidal lamp is open, not with strong light, or direct sunlight photosensitive components at the bottom of the machine, lest cause performance obstacle, affect the normal use and life, cause accident harm to humans or animals  If used for a long time, the position of the protective lampshade will accumulate dust, causing the UV lamp to keep on and lose the protection function to human body. In this case, dust the surface of the sensor probe with a clean cloth

2

Product Description
Power Switch Dust cup release button
Dust cup

Handle

Flap Mode Suction Inlet
UV light

Indicator light UV flap indicator light
Dust cup Stainless steel mesh HEPA HEPA holder

Range Sensor Lamp cover knob
Rear wheel Charging connector

Accessories List

Machine

Charging Base

Dust cup accessories (has been assembled)

Adaptor

User manual

Brush

Attention Before assembling the product, please check the accessories list and confirm that all parts have been received

Operating instruction
Preparation before using
·Make sure the components of the UV vacuum cleaner are assembled in place ·Check whether the poweris sufficient to ensure the product works normally
Charging Instructions
·Plug the adapter into the charging base and the other end into the power socket ·Do not turn on when charging ·The power indicator light is fully charged when it is on in all three cases
The power indicator flashes in turn when charging
Attention
·Put the machine into the charging base, and the power indicator will flash in turn to start charging ·Please charge the battery fully when you use a new battery or first use it after long-term storage ·Please charge more than 3 hours before the first use
5

How to use
Indicator light
Switch button shortly, the light is on after starting up, the machine is started, all functions are started with one key, and the short button is pressed to turn off (all functions are stopped)

UV and Flap Instructions
·When the machine touches the object surface, the infrared sensor detects the object. When the UV light is on, the flap mode starts. Away from the surface of the concealment object, the infrared induction probe cannot sense the object, the UV light and the flap mode is closed, the UV and the flap indicator work synchronously

· 3 lights 100% · 2 lights 65% · 1 light 30% · 1 light to flash, need to be charged
Attention A
To avoid accidental pet injury, UV lamp equipped with infrared sensor probe safety switch, off the surface of the object automatically UV off.
6

UV and Flap indicator light

Cleaning & Maintenance
Clean Dust Cup
Press the release button to remove the cup
©(9 Open the mesh in the main clockwise direction


()
Remove the dust cup
u U
Clean the metal filter cover, washable

y
Clean the dust cup with the brush

Clean HEPA with brush

7

Exhaust Sponge

Hood release button

Press the release button to open the hood

Remove the air filter sponge , washable

ATTENTION A
All washable parts can be put into the main machine after they are dried.
Daily storage
· When not using the machine for a long time, please put the machine in a cool and dry place, do not put the machine in direct sunlight or moist environment
·When you do not use the machine for a long time, please make sure to charge and discharge at least once every three months 8

Trouble shooting
When there is malfunction of the machine, please refer to the following chart for trouble shooting.

Details

Possible Reasons

1 Low battery Machine not work 2 Do not press the power switch

Treatment
please charge battery in time Press the switch

Less suction

1 Metal mesh or the HEPA filter is blocked 2 The suction of the machine is blocked

Clean the dust cupmesh or HEPA filter Clean the suction

UV light not work

1 Object surface is not smooth or the machine
bottom does not fully touch the object, resulting in the induction probe in a protective state
2 lamp tube damaged

Keep the surface flat or the machine bottom the in full contact with the cleaned object
Change the lamp tube

Too much noise

1 Full dust cup 2 The machine suction is blocked 3 The dust cup filter or HEPA filter is blocked

Stop using and clean up the blockage

4 No filtering component is installed

Install the filter component

9

Technical Parameters
Product Type Product model Voltage
Power Max Power Capacity UV lamp power
N.W. Charging time Adapter voltage Input Adapter voltage Output Working time Battery capacity

UV Vacuum Cleaner
KC101 21.6V 100w 120w 0.4L 6w
1.3kg
2.Sh 100-240V- 50/60Hz 1A
DC 26V1A 25min 2200mAh
10

Hazardous Substances Contained in Components

Hazardous Substances

Components
Plastic Motor
Circuit boards and components
Adapter
Metal Parts Battery
Others

Lead
(Pb) x 

Mercury

Cadmium

(Hg)

(Cd)

Chromium
(Cr (VI

Polybrominated bipheny
(PBB)

Polybrominated diphenyl
ethers
(PBD

The chart is based on the regulation of SJ/T11364

O: Means the content of the hazardous substance indicated in contained in the component is within the limits set by GB/T26572. X: Means the content of the hazardous substance indicated in contained in the component is higher than the limits set by GB/T26572.

(All components labeled with X met the requirement of European Union RoHS, Or no substitutes can be found due to current technology level)
(This chart covers all the products of SWDK. However, not every products contain all 11

components described in the charts)




Corel PDF Engine Version 14.0.0.653