Instructions for TROLINK models including: TN7231N1, 2AYHW-TN7231N1, 2AYHWTN7231N1, Infrared 24-Key Controller Adopts Advanced Micro-Control Unit, Infrared 24-Key Controller Adopts, Advanced Micro-Control Unit
Shenzhen Trolink Technology Co., Ltd. TN7231N1 TN7231N1 3 Key control box 2AYHW-TN7231N1 2AYHWTN7231N1 tn7231n1
File Info : application/pdf, 4 Pages, 600.89KB
DocumentDocumentShenzhen Trolink Technology Co., Ltd. 1.Outline: Infrared 24-key controller adopts advanced micro-control unit, used to control all kinds of lamps with LED as light source, such as: LED light bar, LED module, LED light box, luminous characters, etc.; it has low price, convenient wiring and simple use And other advantages; with memory storage function, static brightness adjustment, static color selection, dynamic speed adjustment and other lighting effects can be carried out through the infrared remote control. 2. Specifications Name Specification Work Temperature -20-60 Input Voltage DC 5V-12V-24V Output Circuit 3 Circuits Output Current 6A OutputPower Connection Method Product Size Remote ControlSize Package Dimensions Carton Size 72w Common-Anode L63.5 xW23.6 xH11.5 mm L51.5xW84.5xH7mm L200 xW120 mm L420 x W 340 x350 mm Product Picture 3. Dimensions: 3.1 Controller Shenzhen Trolink Technology Co., Ltd. 3.2 Remote control The key functions are as follows: RGB brightness+/ RGB brightness-/ Dynamic mode Dynamic mode speed- speed+ Static red Static green Static rose Static turquoise Static orange Static cyan blue Static goose yellow Static sky blue Static yellow Static cyan Shut down Static blue Static sapphire Static purple gray Static sauce purple Static purple Boot up Static white Seven-color strobe Seven-color jump Seven-color Breath Seven-color gradient Shenzhen Trolink Technology Co., Ltd. 4. Application connection icon Note: Connect the load line first, then the power line; make sure that there is no short circuit between the connecting lines before powering on. 5. Precautions 1The power supply voltage of this product is DC5V-12V-24V, and it must not be connected to other voltages; 2The lead wires should be wired correctly according to the color and label provided in the wiring diagram; 3 This product cannot be overloaded. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Adobe Acrobat Pro DC (32-bit) 21.1.20138