Boult Audio ProBass Gearpods User Manual

Product Introduction

TWS Earbuds: Two wireless earbuds.

Earbud Charging Case: Case to store and charge the earbuds.

USB Cable: Cable for charging the case.

Ear Cap: Various sizes (L, M, S) for earbud fit.

Summary of Button Functions

• 1 Silicone Eartips: For comfortable fit in the ear.
• 2 Pods Charging Pin: Connects to the charging case for power.
• 3 Earbuds Indicator: LED light indicating earbud status.
• 4 Touch Control Area: Area on the earbud for controlling functions.
• 5 Case Charging Pods for Pods: Compartments within the case where earbuds are placed for charging.
• 6 Charging Pods Indicator: LED light on the case indicating charging status.
• 7 Type-C Charging Connector: Port on the case for charging.

1. Connecting to Earbuds

First time Setup:

Take earbuds out from the case; they will automatically turn on. Turn your device Bluetooth on. Search for "Boult Audio Gearpods" and select to connect.

Diagram: Shows earbuds being removed from case and a smartphone screen displaying Bluetooth connection to "Boult Audio Gearpods".

Regular use:

Once next use, the earbuds will automatically connect with a preconnected device.

2. Start Listening

Place the earbuds into your ear and twist slightly for a comfortable and snug fit.

Diagram: Illustrates correct placement of earbuds in the ear.

Note: Regularly clean the dust mesh after use to avoid the sound being blocked by dirt and debris.

3. Power On & Off

Power-On

• Remove the earbuds from the case; they will automatically turn on and pair with each other.
• Long press the touch control area on both earbuds at the same time for 2 seconds; the earbuds will turn on and pair with each other.
• Light status: One side flashes red and blue LED light alternatively, the other side flashes blue LED light quickly.

Power-Off

• Earbuds will automatically turn off and enter charging mode when they are placed in the case.
• Disconnecting the Bluetooth from the device and laying the earbuds down for 3 minutes will turn them off.
• Disconnecting the Bluetooth from the device, long press the touch control area for 5 seconds, and the earbuds will turn off.

4. Start Charging

Charging the Earbuds

Place the earbuds into the case. Once the charging pin connects, the light on the charging case will turn on to display the case battery. The first and fourth lights will remain white to indicate the earbuds are charging. When the lights turn off, the battery is full.

Charging the Case

Plug the charging case into a 5V/1A adapter with a Type-C cable (included in the package). The charging light will flash white when charging. When full, the white light will stay on, and the case should be disconnected from the power source.

Diagram: Shows the charging case being connected to a USB cable and power source.

5. Specification

• Bluetooth Standard: Version 5.1
• Bluetooth Profile: HSP/HFP/A2DP/AVRCP
• Output Voltage of Base: 3.7V
• Charging time Earbuds: 1.5H, Charging case: 1H
• Working distance: 10M
• Compatible System: Android/IOS/Windows

Controls:

• Music Play/Pause: Single Click on L or R earbud
• Next Song: Double click the R earbud
• Previous Song: Double click the L earbud
• Pick up call: Single Click on L or R earbud
• End call/Reject call: Double-click on L or R earbud
• Voice Assistant: Long press 3 Seconds L or R earbud

Diagram: Illustrates touch controls on left (L) and right (R) earbuds, indicating functions like "Long press 2s Previous Song" and "Long press 2s Next Song".

6. Clear to pairing

Clear the pairing record of earbuds and mobile phones:

Take out the earbuds from the charging case, and touch the left and right earbud 5 times. This will clear the record of the Bluetooth device. Then search for the Bluetooth name "Boult Audio Gearpods" to pair.

Diagram: Shows earbuds being touched 5 times and a smartphone screen displaying Bluetooth connection to "Boult Audio Gearpods".

Resume pairing of left and right earbuds:

Put earbuds in the charging case and charging. Then take earbuds out of the charging case after a few minutes; they will enter pairing mode automatically.

Diagram: Shows earbuds being placed in the case, taken out, and then automatically pairing.

Trouble Shooting

P: The earbuds don't pair with each other?
A: Place the earbuds into the case for charging a few seconds. Take them out of the case and try to connect again.

P: The earbuds don't charge when placed into the case.
A: Check to see if the charging case light turns on when earbuds are placed inside. If it doesn't light up, charge the case first.

P: The sound is imbalanced between the left and right side.
A: Please clean the earbuds mesh after use.