Bowers & Wilkins FS-805 D4 Assembly Instructions

Step 1: Prepare the Base and Uprights

Attach the two uprights (a) to one of the bases (b) using four M6 x 15mm screws (c) per upright. Ensure the uprights are correctly oriented.

Diagram shows two uprights being attached to a base.

Step 2: Attach the Second Base

Invert the assembled section from Step 1. Attach the second base (b) to the top of the uprights (a) using four M6 x 15mm screws (c) per upright. Ensure the bases are aligned correctly.

Diagram shows the assembly from Step 1 being inverted and a second base being attached.

Step 3: Secure the Uprights

Use the 4mm Allen key (j) to secure the uprights (a) to the base (b) using M4 x 10mm screws (g) and M4 x 16mm screws (h).

Diagram shows screws being inserted into the base and uprights, with Allen keys indicated.

Step 4: Attach the Top Plates

Attach the top plates (f) to the uprights (a) using the remaining M6 x 15mm screws (c). Use the 5mm Allen key (k) for this step. Ensure the correct orientation of the top plates.

Diagram shows top plates being attached to the uprights with screws and an Allen key.

Important Note on Spike Length:

• When attaching the spikes (d), ensure they do not exceed 32mm in length.
• When attaching the spike locking nuts (e), ensure they do not exceed 28mm in length.

Diagrams illustrate the correct and incorrect lengths for spikes and locking nuts.

Step 5: Route Speaker Cables

Carefully route the speaker cables through the designated channels in the uprights (a).

Diagram shows speaker cables being fed through the uprights.

Step 6: Fill the Stands (Optional)

For enhanced stability and sound performance, the uprights (a) can be filled with dry sand (silver/play/silica). Ensure the stand is upright before filling.

Diagram shows sand being poured into the speaker stand uprights.

Step 7: Final Assembly

Attach the top plates (f) to the stand assembly using the provided screws (g, h) and Allen keys (i, j).

Diagram shows the final assembly of the top plate onto the stand.

Step 8: Mount the Speaker

Place the speaker onto the assembled stand. Ensure it is securely positioned.

Diagram shows a speaker being placed on the assembled stand.