Introduction
This document provides essential information for the X-Sense SC01 and SC02 Combination Smoke and Carbon Monoxide Alarms. These alarms are designed to detect both smoke from fires and carbon monoxide (CO) from combustion sources, providing dual protection for your home and family.
Key Features
- Dual detection of smoke and carbon monoxide.
- Audible alarm [alarm-sound] with a loud siren.
- Visual indicator: A red flashing LED indicator [indicator-light] signals an alarm condition.
- Designed for easy installation and operation.
- Recommended for use on each level of the home for maximum protection.
Installation and Placement
For optimal performance, it is crucial to install smoke and CO alarms on every level of your home. Proper placement ensures timely detection of potential hazards. Refer to the full manual for detailed installation instructions, including mounting recommendations.
Operation and Testing
Regular testing is vital to ensure your alarm functions correctly. Test the alarm weekly by pressing the test button. During testing, the alarm will sound, and the LED indicator will flash red. It is important to wake up small children in the home, as they may sleep soundly and not hear the alarm.
Important Note: Never ignore the sound of the alarm! It signifies a potential danger.
Safety and Emergency Response
In the event of an alarm:
- Evacuate the premises immediately.
- Do not stop to gather belongings or dress.
- Ensure all occupants are accounted for.
- Call emergency services from a safe location outside the building.
For maximum protection, use smoke & CO alarms on each level and in sleeping areas.
Maintenance
Keep the alarm clean by vacuuming it gently with a soft brush attachment weekly. Avoid using cleaning sprays or solvents directly on the alarm, as they can damage the sensor.
Further Information
For the complete user manual and detailed specifications, please visit the X-Sense website or download the manual from: X-Sense SC01/SC02 Manual.
