Aspire Zelos 50W 2.0 Kit
User Manual
Read this information leaflet fully before you start using this product as it contains important information. The notes below relate to when the device is filled with e-liquid that contains nicotine.
This product is intended for adult smokers. This product is not recommended for non-smokers, young people under the age of 18 years, pregnant or breast feeding women and those experiencing general ill health.
Product Overview
Device Description: The Aspire Zelos 50W 2.0 Kit comprises the Zelos 50W mod and the Nautilus 2S tank. The mod is a compact, portable device designed for ease of use. The Nautilus 2S tank is a sub-ohm tank known for its flavor production and convenient top-filling system.
Visual Description:
- Mod Components: Features a drip tip, fire button, 0.69-inch OLED screen, '+' and '-' adjustment buttons, and a Micro USB port for charging.
- Tank Components: Includes a metal sleeve, glass tube, atomizer, and an adjustable airflow control ring at the bottom.
Kit Contents:
- 1x Zelos 50W mod
- 1x Nautilus 2S tank
- 2x Coils (1x 0.4Ω pre-installed, 1x 1.8Ω pre-installed)
- 10x O-rings
- 1x Extra drip tip
- 1x USB cable
- 1x User manual
- 1x Warranty card
Nautilus 2S Tank Features:
- Super easy top fill system
- Child resistant design
- 2ml e-liquid capacity
- Threaded top cap
- Metal sleeve and glass tube construction
- Bottom adjustable airflow control ring
- Coil resistance: 0.4Ω (recommended wattage 23-28W), 1.8Ω (recommended wattage 10-14W)
- Super efficient wicking for great vapor and flavor production
- Compatible with Nautilus BVC coils
- Suitable for both Mouth-to-Lung (MTL) and restricted direct-to-lung (RDL) vaping styles
- Diameter: 23mm
- Length (including stainless drip tip): 61.5mm
Tank Filling:
- Partially unscrew the top cap to loosen it.
- Place your thumb on the top cap, above the triangle symbol, and push the top cap away to reveal the filling hole.
- Add your preferred e-liquid into the tank through the filling hole.
- Push the top cap back into place.
- Screw down the top cap to seal the tank.
Coil Installation:
- Invert the tank and unscrew to remove the base hardware.
- Push down the child-proof mechanism and unscrew to detach the child-proof coil component.
- Remove the used coil and replace it with a new one.
- Insert the child-proof coil component into the tank, then push down and screw it in to secure it.
- Screw the base hardware back onto the tank.
Mod Specifications:
- Output wattage: 1-50W
- Output voltage: 0.5V-8.0V
- Resistance Parameters:
- VW/VV: 0.1-3.5Ω
- Bypass: 0.2-3.5Ω
- TC (Temperature Control): 0.1-1.0Ω
- Continuous firing time: 10 seconds
- Firmware update: Not applicable (N/A)
- Screen: 0.69 inch OLED screen
- Dimensions: 79mm x 38mm x 23mm
- Battery Type: Built-in LiPo
- Battery capacity: 2500mAh
Device Operation Instructions:
- Power On/Off: Press the fire button 5 times within 2 seconds to lock or unlock the device. While locked, pressing the fire button for 3 seconds turns the system off. To turn the mod back on, press the fire button 5 times rapidly.
- Stealth Mode: Pressing the fire button 3 times rapidly when the mod is on toggles stealth mode. In stealth mode, the fire button still functions, but the '+' and '-' buttons are locked.
- Mode Selection: Pressing the '+' and '-' buttons simultaneously allows selection between VW (Variable Wattage), VV (Variable Voltage), Bypass, and TC (Temperature Control - Ni, Ti, SS) modes. Use the '+' or '-' button to select a mode, then press the fire button to confirm.
- Adjusting Settings: Press the '+' button to increase wattage, voltage, or temperature. Press the '-' button to decrease. Holding either button changes the value faster.
- TC Mode Wattage Adjustment: When in TC mode, press the fire button and '-' button simultaneously to enter the wattage setting interface. Adjust the output wattage using the '+' and '-' buttons, then press the fire button to save the settings.
- Button Lock/Unlock: When the mod is on, pressing the fire button and '+' button simultaneously locks or unlocks the adjustment buttons. When locked, wattage, voltage, and TC settings cannot be changed.
- Temperature Unit Conversion: To change temperature from Fahrenheit (°F) to Celsius (°C) or vice versa, press the '+' or '-' button until you pass the temperature range. The temperature indicator will automatically switch units.
- Sleep Mode: The Zelos enters sleep mode after 1 minute of inactivity. Press the fire button to wake the device.
Protection Features:
- Automatic Cut Off
- Short Circuit Protection
- Low Resistance Protection
- Overheat Protection
- Over Charge Protection
- Over Discharge Protection
Charging Instructions:
- Charge the Zelos using the Micro-USB port. The maximum charging current is 1A.
- Connect your Zelos mod to a charger. The screen will display a flashing battery icon.
- Charging stops automatically when the battery reaches 4.2V or is fully charged. The screen will remain off when fully charged.
Important Information About Using Nicotine Containing E-Liquids
Before using nicotine-containing e-liquids, the user should read the following information carefully.
Nicotine Containing E-Liquids:
Do not use if you are allergic to nicotine or any of the other ingredients contained within the e-liquid (refer to the manufacturer's label for full details).
Warnings and Precautions:
Nicotine-containing e-liquids are not recommended for:
- Non-smokers
- Young people under the age of 18 years
- Pregnant or breast-feeding women (nicotine is known to cross the placenta and be excreted in breast milk)
- Individuals experiencing general ill health, such as heart disease, stomach and duodenal ulcers, liver or kidney problems, long-term throat disease, or difficulty breathing due to bronchitis, emphysema, or asthma
- Individuals with an overactive thyroid gland or phaeochromocytoma (a tumor of the adrenal gland that can affect blood pressure)
- Individuals with diabetes, as nicotine may affect blood sugar levels
- Individuals taking certain medications, including:
- Theophylline (for breathing problems)
- Ropinirole (for restless leg syndrome)
- Clozapine (for schizophrenia)
Possible Side Effects:
If you inhale too much nicotine or use the product excessively, you may experience one or more of the following effects:
- Feeling faint
- Nausea (feeling sick)
- Headache
- Coughing
- Irritation of the mouth or throat
- Dizziness
- Stomach discomfort
- Hiccups
- Nasal congestion
- Vomiting (being sick)
- Heart palpitations
- Abnormal heart rate
If you experience any of these side effects, including any not listed, discontinue use. If effects persist after stopping use, consult a doctor or healthcare professional and provide them with this leaflet.
Safety Note:
To avoid accidental firing, always ensure the device is locked or switched off when not in use, especially when carrying it in a pocket, bag, or purse.
The diameter of the pod refill hole is 3mm.
Further Information:
To learn more about Aspire products and how to use them, please visit: www.aspirecig.com