GP Batteries International | GP Batteries International
Instruction Manual for Recyko models including: M451 Speed Charger USB 4-slot NiMH, Speed Charger USB 4-slot NiMH, USB 4-slot NiMH, NiMH
Recyko Speed Charger (USB) M451 4-slot NiMH with 4 x AAA 950mAh NiMH B | GP Batteries Hong Kong
File Info : application/pdf, 2 Pages, 11.66MB
DocumentDocumentM451
Recyko Speed Charger (USB) 4-slot NiMH
Instruction Manual
Go to gpbatteries.com for product information
Unpacking and checking
You should find the following items in the packaging*. Please make sure they are undamaged and in good working order.
Recyko Speed Charger (USB) 4-slot NiMH M451
Recyko batteries
USB charging cable (input/output)*
* For exact product contents, please refer to "In the box" section of the packaging.
Charging instructions Fig. 1
Fig. 2b
Fig. 3
LED indication Condition Charging in progress Bad or single-use batteries Charging completed
Fig. 2a
LED indicator Green (Flashing) Red (Rapid flashing) Green
Charging time^
Recyko batteries (1 - 4pcs)
Size AA AAA
Capacity 1300 - 2600 mAh
650 - 950 mAh
Charging time 1.3 - 5.2 hrs 2 - 3 hrs
^ Charging time is subjected to the power rating of the USB adapter with these output levels:
Output voltage and current
DC 1.4 V
Size AA AA AAA AAA
Quantity 1 - 2 pcs 3 - 4 pcs 1 - 2 pcs 3 - 4 pcs
Output level 1.1A
0.73 - 0.55A 0.73A
0.49 - 0.37A
Features
GB
· Individual charging of 14 pcs of AA / AAA batteries with 4 LED indicators
· Auto power cut-off : Negative delta V, safety timer & temperature cut-off protections
· USB power input (5V / 1A)
· Approx. charging time for AA 2100 mAh / AAA 850 mAh batteries: 24 hours
· Trickle charge mode
· Dual charging via (i) direct USB charging connection or (ii) Recyko 4-slot or 8-slot charger docks
Charging instructions
Read the instruction manual thoroughly before use. Keep the manual for future reference.
1. Insert 14 pcs NiMH batteries into the battery charger according to the battery polarity (Fig. 1). 2. Connect the micro USB end of the cable to the micro USB port of the battery charger (Fig. 2a). 3. Connect the other end of the USB cable to a smartphone wall charger (Fig. 2b) or similar USB port
on a power bank or USB car charger. Charging will commence and the LED indicators will show the status of the batteries (Fig. 3). The LED indicators will flash green when the batteries are charging. For bad or single-use batteries, the LED indicators will flash red rapidly. 4. Once the batteries are fully charged (LED constant green), remove the batteries and disconnect the battery charger from the power supply. 5. For charging via charging dock, please refer to the instruction manual of corresponding Recyko charger dock.
For best performance and safety, always use NiMH Recyko batteries.
Usage tips
· It is normal for batteries to become hot during charging and they will gradually cool down to room temperature after fully charged.
· Remove batteries from the electrical device if the device is not going to be used for a long time. · Battery storage temperature: -20 ~ +35°C · Charging operation temperature: 0 ~ +33°C
Safety information
· This charger is designed to charge only NiMH batteries. Charging other batteries may lead to explosion, battery rupture or leakage, personal injury or property damage.
· This charger is designed for indoor use only. Do not expose the charger to rain, snow or direct sunlight.
· Do not use the charger in humid conditions. · Make sure the charger is used between 0 ~ +33°C. · Do not use non-rechargeable, LiFePO4, NiCD or Li-ion batteries. · Do not use the charger if it has a damaged plug. · Do not use the charger after it has been dropped or damaged. Do not open/disassemble the
charger. · This charger is maintenance-free but should be wiped clean regularly with a dry and soft cloth.
Do not use abrasives or solvents. Unplug the charger before cleaning. · This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
M451
(USB)
gpbatteries.com
*
M
*
*
b
USB (/)
a
LED
LED
^
1-4
AA 3 AAA 4
1300 - 2600mAh 650 - 950mAh
^USB
DC . V
AA 3 AA 3 AAA 4 AAA 4
1 2 3 4 1 2 3 4
() 1.3 5.2 2 3
1.1A
0.73 0.55A 0.73A
0.49 0.37A
ZH-TC
· AA / AAA LED
· : -V
· USB (V/A)
·
· iUSBii
. - AA /AAA . micro USBa . USB (b)
USB LED LED LED . LED .
· · · : - - · : -
· (NiMH)
· · · · (LiFePO) (NiCD) (Li-ion) · · · ·
·
FCC() ()
USB
M451
(USB) M
b
USB
a
LED
/
LED
^
(-)
1300 - 2600
650 - 950
^
DC 1.4 V
1 - 2 3 - 4 1 - 2 3 - 4
1.3 - 5.2 2 - 3
1.1A
0.73 - 0.55A 0.73A
0.49 - 0.37A
· · USB (V/A) LED · · · · iUSB
ii
ZH-SC
. - (+)(-) . USBa . USB(b)*
USB . LED
LEDLED . LED . . .
* USB
· · · : - · :
. . (NiMH)
. . . . . . . .
.
. .
M
ZH-SC C
. - .