UK DECLARATION OF CONFORMITY
Issued: 01/12/2019
Revised: 14/08/2025
Declaration Statement
The object of the declaration described below is in conformity with the relevant statutory requirements:
- SI 2017 No. 1206 The Radio Equipment Regulations 2017
- SI 2012 No. 3032 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
- SI 2023 No. 1007 The Product Security and Telecommunications Infrastructure Regulations 2023
- Applicable security requirements in Schedule 1 with a defined support period until 06 January, 2022
Applicable Standards
- ECE Regulation:10.04 - Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility, Paragraphs 6.5, 6.6, 6.8 and 6.9
- EN 300 328:v2.2.2 - Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wideband modulation techniques
- EN 301 489-1:v2.1.1 - Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements
- EN 301 489-3:v2.1.1 - Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz
- EN 301 489-17:v3.1.1 - Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems
- EN 303 413:v1.2.1 - Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands
- EN 55032:2012 - Electromagnetic compatibility of multimedia equipment – Emission requirements
- EN 62368-1:2014 - Audio/Video, Information and Communications Technology Equipment – Safety requirements
- EN 62479:2010 - Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
Manufacturer Information
Manufactured By: GARMIN International
Manufacturer's Address: 1200 E 151st Street, Olathe, KS 66062, U.S.A.
Manufacturer's Address (Taiwan): GARMIN Corporation, No.68, Zhangshu 2nd Rd., Xizhi Dist., New Taipei City 221, TAIWAN, R.O.C
Type of Equipment: Information Technology Equipment (Global Positioning System Receiver)
Model Numbers: A03817, Dash Cam Tandem
Declaration of Compliance
The undersigned does hereby declare that the equipment complies with the above Directives and Standards.
Signed for and on behalf of: GARMIN (Europe) Ltd.
Place: Hampshire, UK
Date: 14/08/2025
Name: Jamie Wiltshire
Function: Quality Associate
Signature: JSwuy