Installation Instruction

Our product will be delivered to you in 2 packages. The delivery times of these 2 packages may differ, please be patient and thank you for your understanding.

CE ?

IMPORTANT! KEEP FOR FUTURE REFERENCE: READ CAREFULLY

• To be assembled by an adult. Assembly must be checked by an adult before use
• WARNING! Keep all screws, small parts and plastic bags out of the reach of children
• Properly identify all parts before assembling
• Never use your item if any of its parts are broken or missing
• Should any problems arise, please contact our After Sales Service
• Manufacturer's instructions shall be followed at all times
• Care: Clean with a soft, dry cloth. In case of larger stains, carefully rub with a slightly damp, non-abrasive sponge
• Avoid the risk of fire by not placing furniture near sources of ignition or hot items
• Do not jump on the bed

Detail View

A detailed view of the bed frame components and hardware is provided. Key parts include the headboard (1), crossbars (2), side rails (4), footboard (5), and slats (17).

Liste der Einzelteile (Parts List)

Hardwareliste+N636P195135

• 1: Kopfteil-1Stück (Headboard - 1 piece)
• 2: Querbrett -1Stück (Crossbar - 1 piece)
• 4: Seitenschienen-1Stück (Side rail - 1 piece)
• 5: Fußbrett-1Stück (Footboard - 1 piece)
• 6: Seitengitter Stützstange -4Stück (Side rail support bar - 4 pieces)
• 7: Seitenschienen Stützbeine-2Stück (Side rail support legs - 2 pieces)
• 12: Stützbeine des Bettes-4Stück (Bed support legs - 4 pieces)
• 13: Mittelstützstange-2Stück (Center support bar - 2 pieces)
• 14: Mittleres Stützbein-2Stück (Center support leg - 2 pieces)
• 15: Verbundenes Stützbein-1Stück (Connected support leg - 1 piece)
• 16: Latte-1Stück (Slat - 1 piece)
• 17: Latte-2Stück (Slats - 2 pieces)

N636P195136

• 3: Seitenschienen-1Stück (Side rail - 1 piece)
• 8: Obere Rückenlehne-1Stück (Upper backrest - 1 piece)
• 9: Obere Rückenlehne-1Stück (Upper backrest - 1 piece)
• 10: Untere Rückenlehne-1Stück (Lower backrest - 1 piece)
• 11: Untere Rückenlehne-1Stück (Lower backrest - 1 piece)

Hardwareliste

N636P195135

• A: Inbusschlüssel (Allen wrench) - 1 piece
• B: Schrauben (Screws) Ø8*50mm - 1 piece
• C: Schrauben (Screws) Ø8*20mm - 30 pieces
• D: Schrauben (Screws) Ø8*40mm - 32 pieces
• E: "7"-Anschluss (7" connector) - 4 pieces
• F: Drei-Loch-Eisen (Three-hole iron bracket) - 20 pieces
• G: Abstandshalter (Spacer) - 14 pieces
• H: Center support bar fittings - 2 pieces
• I: Buckle - 10 pieces
• J: LED (1 piece)
• K: Netzteil (Power supply) - 1 piece
• L: Fernbedienung (Remote control) - 1 piece

Note on Screws: Please note that the shapes of screws B, C, and D are similar. Please install according to the instructions and distinguish them.

Assembly Instructions

General Advice: Before installation, insert screws into the holes and tighten them, but not to 100%. Tighten to 70%-80% is sufficient. Finally, after all screws are installed, tighten all screws to 100%. If you encounter issues like misaligned holes or difficulty installing parts, check if the screws are used correctly and adjust their tightness.

Schritt 1 (Step 1)

Attach part (2) to part (1) using screws (12).

Schritt 2 (Step 2)

Attach part (5) to part (1) using screws (12).

Schritt 3 (Step 3)

Attach part (2) to part (1) using screws (D) and (G). Use 4 pieces of (D) and 4 pieces of (G).

Schritt 4 (Step 4)

Attach parts (10), (3), (6), (11) using screws (A), (B), (D), (C). Specific quantities are indicated in the diagram.

Schritt 5 (Step 5)

Attach parts (11) and (3) using screws (A), (C), (B), (D). Specific quantities are indicated in the diagram.

Schritt 6 (Step 6)

Attach parts (3) and (4) using screws (A), (C), (B), (D). Specific quantities are indicated in the diagram.

Schritt 7 (Step 7)

Attach part (9) to part (8) using screws (A), (D), (G). Use 2 pieces of (A), 2 pieces of (D), and 2 pieces of (G).

Schritt 8 (Step 8)

Attach part (9) to part (8) using screws (A), (G), (B), (D). Specific quantities are indicated in the diagram.

Schritt 9 (Step 9)

Attach part (1) to parts (9) and (8) using screws (A), (D), (G). Use 2 pieces of (A), 2 pieces of (D), and 2 pieces of (G).

Schritt 10 (Step 10)

Attach parts (2), (11), (10), (3), (5), (4) using screws (A), (C), (D), (E). Specific quantities are indicated in the diagram.

Schritt 11 (Step 11)

Attach parts (2) and (3) using screws (A), (C), (B), (H). Specific quantities are indicated in the diagram.

Schritt 12 (Step 12)

Attach parts (13) and (14) using screws (A), (D). Specific quantities are indicated in the diagram.

Schritt 13 (Step 13)

Attach part (2) to parts (5) and (13) using screws (A), (D), (B), (H). Specific quantities are indicated in the diagram.

Schritt 14 (Step 14)

Attach parts (7) and (16) using screws (A), (B), (C). Specific quantities are indicated in the diagram.

Schritt 15 (Step 15)

Attach parts (6) using screws (A), (F), (J). Specific quantities are indicated in the diagram.

Schritt 16 (Step 16)

Place slats (17) onto the bed frame supports.

Schritt 17 (Step 17)

Connect the LED lighting system using part (K) and the remote control (L).

LED Light Operation

HINWEIS: You can scan the QR code to download an app that allows you to control the LED strip color, similar to a remote control. When your phone plays music through the app, the color of the LED strip will also change according to the music's intensity.

The remote control has buttons for power (ON/OFF), mode selection (MODE, AUTO), speed adjustment (SPEED+, SPEED-), color selection (R, G, B, W, COLOR), and a 2.4G RF connection indicator.

Remote Control Battery Installation

• NOTE: The battery in the remote control requires you to purchase and install it yourself.
• The required battery is a CR2025 3.V lithium cell.
• Follow the diagrams to open the remote control, insert the battery correctly, and close the remote control.

Safety and Compliance

The product is compliant with relevant safety standards as indicated by the CE marking and the TÜV SÜD Attestation of Conformity.

Attestation of Conformity Details:

• Holder of Attestation: DONGGUAN BAIYOU ELECTRONIC CO.,LTD
• Product: Multiple Socket Outlets (Note: This seems to be a miscategorization in the provided document, as the primary product is a bed frame. The attestation might be for an accessory or a different product.)
• Test Report No.: 874102337701-00
• Date: 2023-09-06
• Models covered by Attestation: BY213-G011Y, BY213-G011Y-C, BY213-G021Y, BY213-G021Y-C, BY213-G031Y, BY213-G031Y-C, BY213-G041Y, BY213-G041Y-C
• Parameters: Rated voltage: 250V~, Rated frequency: 50Hz, Rated current: 16A, Protection class: IP20. Cable type: H05VV-F 3G1.0mm² or H05VV-F 3G1.5mm². USB output details are provided for various models, including rated output voltage (5.0VDC, 9.0VDC, 12.0VDC) and current ratings for Type A and Type C ports.
• Tested according to: IEC 60884-1:2002, IEC 60884-1:2002/AMD1:2006, IEC 60884-1:2002/AMD2:2013, IEC 60884-2-7:2011, IEC 60884-2-7:2011/AMD1:2013, SS 428 08 34:2013/T1:2018

General Safety Reminders:

• Assembly by an adult is required.
• Keep small parts away from children.
• Do not use if parts are broken or missing.
• Follow manufacturer's instructions.
• Clean with a soft, dry cloth.
• Avoid placing near heat sources.
• Do not jump on the bed.