Instruction Manual

Product Components

Please check if all product accessories are complete after receiving the goods.

Product illustrations, accessories, and user interfaces in the manual are schematic diagrams for reference only.

Due to product updates and upgrades, there may be slight differences between actual products and schematic diagrams. Please refer to the actual product.

Installation Instructions (EU Version)

Before installation, confirm if the actual installation voltage conforms to the product's working voltage. Improper voltage can damage the product and pose safety risks.

Before installation, ensure the power is turned off to avoid electric shock. Follow the instructions strictly during installation. Improper installation can cause accidents such as fire, electric shock, or the lamp body falling.

It is recommended to use a normal push-button switch for the wall switch and not to connect it to a dimmer or smart switch.

1. Mark the mounting hole with a pencil.
2. Punch with an electric hand drill (6-8mm).
3. Install expansion tubes into the hole.
4. Align the mounting holes of the frame and mount the lamp base to the ceiling.
5. Connect the power cable "L/N" to the terminal block.
6. Hold both sides of the lamp cover with your hands, align it with the base plate, and rotate the lamp cover clockwise until it is in position.

Safety Precautions

Installation must be performed by professionals in the absence of power.

The lamp will generate heat during operation; do not touch it for extended periods.

Only the wall switch can interrupt the lamp's power supply. Using the phone APP or remote control to turn off the lamp does not mean the power is completely cut off. In this case, touching or disassembling the lamp is prohibited, as it may cause accidents.

Product Features

• This light has four control modes: wall switch, remote control, APP control, and Alexa voice control.
• Color temperature can be adjusted from 3000K to 6500K, and brightness can also be adjusted.
• RGB mode allows for colorful light decoration.
• Memory function saves light color and brightness when the light is turned off, returning to the last state when turned on again.
• Night light mode reduces power to 2W for nighttime illumination and energy saving.

Remote Control

Notice:

• The remote control requires two AAA batteries (not included).
• This remote control is 2.4G, with an optimal applicable distance within 15 meters in the same space.

Indicator Light Functions:

• ON/OFF: Power on/off.
• Timing: Press once for 15 minutes, twice for 30 minutes, hold for 5 seconds for continuous timing.
• Warm Light: Adjusts color temperature (cooler).
• Cool Light: Adjusts color temperature (warmer).
• Brightness +/-: Adjusts brightness.
• Main Light Mode: Cycles through 3000K, 6500K, 4000K, and night light.
• Previous Song: Play previous track.
• Volume+: Increase volume (hold for continuous increase).
• Next Song: Play next track.
• Volume-: Decrease volume (hold for continuous decrease).
• Play/Pause: Play or pause music.
• Bluetooth Disconnect: Hold for 5 seconds to disconnect Bluetooth.

Pairing Instructions:

1. Turn off the lamp with the wall switch.
2. Turn the lamp back on with the wall switch, then press and hold the "ON/OFF" button until the light flashes and the remote is successfully paired. (Complete within 10 seconds).

Note: Scan the QR code for a video demonstration of remote pairing.

APP Download and Lamp Reset

Scan the QR codes to download and install the "Tuya Smart" or "Smart Life" APP (both have the same functions and operating interface).

Follow the APP steps to register an account and log in. Enable your phone's "Bluetooth" and "Location" services.

Pairing with APP and WIFI:

1. Open the APP and click the "+" icon.
2. Swipe left and select "Automatic Scan".
3. The APP will automatically detect new devices, finding the device named "WF-Bulb".
4. Connect to a 2.4G WIFI network (5.0G WIFI does not work).

Note: The device name is for reference only; different product batches may have different names.

If the APP cannot find the bulb or you have changed your WIFI, ensure the lamp has been reset as per section 5.3 and try again. You can also watch the video instructions via the QR code on the next page.

Voice Control (Alexa Example):

After successful WIFI connection, follow the steps to license the bulb to third-party services like Alexa:

1. Click the "2" icon in the top right.
2. Select "Third-party Services" (e.g., Alexa).
3. Enter your Alexa account and password.
4. License successful.

Note: After licensing, go to the Alexa APP to confirm that "Tuya Smart" or "Smart Life" is enabled in Alexa skills. All bulbs in your account will sync with your Alexa device list, allowing voice control.

Bluetooth Speaker

Bluetooth speakers can be connected separately to mobile phones, tablets, PCs, and other Bluetooth-enabled devices. You can also connect to Echo and transfer sound from Echo to the lamp.

Scan for Bluetooth devices and connect to the speaker named "JB SPEAKER".

If the Bluetooth speaker is connected to other devices (e.g., a neighbor's), you can clear all Bluetooth pairings by holding the "Play/Pause" button on the remote control for more than 6 seconds. The indicator light will flash multiple times, and you will hear a sound, indicating that all Bluetooth pairings have been cleared and you can now pair with your device.

Note: Scan the QR code for a video description of the process.

Contact Information

For assistance, please contact:

Email: chysongoods@outlook.com

Phone: +86 137 1289 9030