User Guide for FEIT Electric models including: BTA195CTCAESM, SYW-BTA195CTCAESM, SYWBTA195CTCAESM, OM60DM 60w Replacement LED Lamp, 60w Replacement LED Lamp, LED Lamp, Lamp
Feit Electric Company BTA195CTCAESM LED Lamp SYW-BTA195CTCAESM SYWBTA195CTCAESM bta195ctcaesm
60w REPLACEMENT LED LAMP USES ONLY 8.8W E26 MEDIUM BASE NON-DIMMABLE INDOOR SUITABLE FOR USE IN ENCLOSED FIXTURES SUITABLE FOR DAMP LOCATIONS; DO NOT USE WHERE DIRECTLY EXPOSED TO WATER LED LAMP · No app or hub required · Set up music to play through Bluetooth in minutes Connection steps: 1. Turn on the phone's Bluetooth 2. Collect "Speaker Bulb" and connect 3. The connection is successful Customize Color of Light with Integrated Switch SOFT WHITE (2700K) BRIGHT WHITE (3000K) TRUE WHITE (3500K) COOL WHITE (4000K) DAYLIGHT (5000K) 3 Year Warranty Use only on 120 Volt, 60 Hz circuits CAUTION: Risk of Electric Shock - Turn off power before inspection, installation, or removal. Do not open no user serviceable parts inside. Do not use if outer lamp envelope is damaged or broken. Not for use with light dimmers. For complete details on our warranty, please look up the item number at www.homedepot.com/ecosmart. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.Adobe PDF library 10.01 Adobe Illustrator(R) 16.0