User Guide for NINJA models including: CFP355A DualBrew Pro Specialty Coffee System, CFP355A, DualBrew Pro Specialty Coffee System, Pro Specialty Coffee System, pecialty Coffee System

Quick Start Guide

CFP355A Ninja DualBrew Pro Specialty Coffee System Quick Start Guide – Ninja Customer Service | Official Support & Help Center


File Info : application/pdf, 7 Pages, 2.17MB

PDF preview unavailable. Download the PDF instead.

CFP355A QSG MP REV Mv4 LR
Please make sure to read the enclosed Ninja® Owner's Guide prior to using your unit.
QUICK START GUIDE
+ RECIPES

BEFORE YOUR FIRST BREW
To prime your brewer:

HERE'S WHAT'S IN THE BOX
NINJA DUALBREW
NINJA POD ADAPTER
Comes fully installed in the brewer. Always ensure to insert it over the brew basket when brewing pods.

1 Plug it into the wall and turn it on.
2 Fill the water reservoir to the Full line with fresh water and place it on the base.
3 Remove the Ninja Pod Adapter and slide the Sliding Lid into the closed position. (Refer to the steps on page 3)
4 Place the empty carafe under the brew basket and run a Full Carafe, Classic Brew.
Once the brew is complete, discard the water and you're ready to brew.

BREW BASKET
Comes fully installed in the brewer. It must always be inserted when brewing pods or grounds.
60 OZ. THERMAL CARAFE
Keeps coffee hot, no warming plate required.
FROTHER WHISK
60 OZ. REMOVABLE WATER RESERVOIR

If you live in a high-altitude area, running a calibration brew is required. Not running a high-altitude calibration brew in a high-altitude area will result in excessive steaming during brewing. Refer to page 7 of the Owner's Guide for instructions on running a high-altitude calibration brew.
2 For how-to videos and more, visit ninjakitchen.com

NINJA SMART SCOOPTM
Use this to measure coffee grounds.
PAPER FILTER KIT
Fold along the seams before inserting firmly into brew basket.

FILLING THE WATER RESERVOIR FULL

FILL TO THE FULL LINE
Fill up to, but do not exceed, the Full line.

LOCKING AND REMOVING THE NINJA POD ADAPTER

The Ninja DualBrew Pro Coffee System comes with a unique Ninja Pod Adapter already installed on the brewer. Always ensure the adapter is installed over the brew basket.

REMOVE LOCK

REMOVE LOCK

1. Once the adapter is installed in the brewer, make sure the position indicator on the left side of the adapter is aligned with LOCK by pulling the handle toward you. Then, lift to open the handle, insert a pod, firmly push down on the handle to pierce the pod, and begin programming your brew.

2. To uninstall the adapter, remove the used pod and close the handle. Push the handle away from you so the position indicator is in the REMOVE position. Then, using the edges on the left and right, lift the adapter out of the brewer.

NOTE: The Ninja Pod Adapter is compatible only with K-Cup pods. It is not compatible with reusable K-Cup filters. If using ground coffee, use the Grounds mode with a paper or permanent filter (sold separately) to brew a single-serve size.

SLIDING LID

The sliding lid is used only when brewing loose coffee grounds. To use it, first remove the Ninja Pod Adapter. Then, using the handle on top of the brewer, slide the lid toward you until it firmly clicks into place.

OPEN

CLOSED

3

POSITIONING THE WATER RESERVOIR The water reservoir can be positioned to the right or along the back of the brewer to optimize counter space.

Back of brewer
STEP 1. Remove the reservoir from the base. Remove the removable latch from the back of the brewer.
CUP, MUG, OR CARAFE

Side of brewer
STEP 2. Swing the reservoir base around the brewer until it clicks into place. You may feel some resistance. Then, rotate the removable latch 180 degrees and reinsert it in the new gap where the base was previously positioned.

BREW BASKET AND NINJA POD ADAPTER ASSEMBLY BREW BASKET MUST BE INSERTED WHEN USING GROUNDS OR PODS.

GROUNDS
BREW BASKET
Must always be inserted when brewing grounds or pods.

OR
PODS
BREW BASKET
Must always be inserted when brewing pods or grounds. Do not insert a filter.

CUP
Pull down the cup platform to set a mug on it.

TRAVEL MUG & XL SIZES
Place an XL Cup, Travel Mug, or XL Tumbler on the base of the brewer.

CARAFE
Place the carafe on the base of the brewer.

NINJA SMART SCOOPTM

The Ninja Smart Scoop is used for accurately measuring coffee grounds. The numbers beside the icons show the number of level scoops recommended for each brew size.

SERVING SIZE

NINJA SMART SCOOP GROUND COFFEE

2­3 small scoops

3­5 small scoops

IMPORTANT: Always measure with level scoops of a medium grind size. Use fewer scoops when brewing decaf coffee. DO NOT use a paper filter in conjunction with a permanent filter.

Specialty 4 oz.

3­5 big scoops 4­7 big scoops
2 big scoops

4 For how-to videos and more, visit ninjakitchen.com

INSERT FILTER
Fold the #4 paper cone filter along the seams, open the top fully, then insert filter firmly into the brew basket.

NINJA POD ADAPTER
Ensure adapter is in the REMOVE position before installing. Always insert over the brew basket when brewing pods.
Questions? 1-877-646-5288 5

1 CAHUOTOOMSEATAICMDERTIPHSOTDOP
OR
GROUNDS

PODS

Ensure the brew basket is installed and the Ninja Pod Adapter is removed. Then, insert a paper filter in the basket
(refer to steps on pages 3 and 5).

Ensure the brew basket and Ninja Pod Adapter are installed in the brewer
(refer to steps on pages 3 and 5).

Use the Ninja Smart ScoopTM to add your desired amount of coffee grounds (refer to the Smart Scoop section on page 4).

Lift adapter handle to reveal pod holder and insert a pod.

Slide the sliding lid forward, ensuring it is completely closed.
6 For how-to videos and more, visit ninjakitchen.com

Firmly push down on the handle to pierce the pod. Some noise and resistance is normal.

2 CHOOSE A SIZE

GROUNDS

*Approximate brew volumes based on Classic brew. Rich brew will produce slightly less output. Refer to the Approximate Brew Volumes chart in the Owner's Guide for more information.

8 oz. 10 oz. 12 oz.

15 oz. 18 oz. 28 oz.

37 oz. 46 oz. 55 oz.

PODS

*Approximate brew volumes based on Classic brew. Rich brew will produce slightly less output. Refer to the Approximate Brew Volumes chart in the Owner's Guide for more information.

Pods cannot brew in carafe sizes.

6 oz. 8 oz.

10 oz. 12 oz.

NOTE: Make sure to use a vessel that is big enough for the brew size you select.

3 CHOOSE A BREW

CLASSIC

Smooth, wellbalanced flavor.

OVER ICE

Specially designed to brew hot over ice for freshly brewed iced coffee that is not watered down. Always fill your vessel to the top with ice cubes before brewing Over Ice.

RICH

Richer than classic, with more intense flavor that stands up to milk, cream, or flavoring.

SPECIALT Y

A super-rich concentrate that allows you to make coffee-based drinks like cappuccinos and lattes. Will only brew 4 oz.

NOTE: DO NOT use glassware on any brew setting.
4 BREW
Press the START BREW button to start brewing. There will be an illuminating progress bar on the display to track the status of your brew. THE BREW MAY PAUSE ONCE OR MULTIPLE TIMES DURING THE BREW CYCLE. THAT'S OK. Pausing allows the coffee grounds to fully extract and unlock the full flavor of the brew style.
NOTE: Ensure the drip stop is open before starting your coffee brew.
Questions? 1-877-646-5288 7

DRIP STOP

The drip stop is used to close off the brew basket to prevent any coffee from dispensing. You will need to manually open and close the drip stop by moving the handle to your desired position. The drip stop can be closed and reopened at any point before, during, or after a brew.

OPEN

CLOSED

CAN'T WAIT FOR THAT FIRST CUP? Close the drip stop to pause the brew cycle, and pour yourself a cup. Then, reopen the drip stop to continue the brew.

STOP THE DRIPS AFTER A BREW At the end of a brew, close the drip stop to prevent coffee dripping from the brew basket and Ninja® Pod Adapter.

FROTHING
COLD

HOT

THE INTEGRATED FROTHER DOES NOT HEAT MILK.
1. Add milk to your cup until it is about 1/3 full. For cold froth, continue to Step 2. For hot froth, microwave for 45­60 seconds.

2. Swing the arm of the frother toward the front of the brewer. Install the frother whisk by twisting it to the right.

3. Hold the cup under the frother and submerge the whisk just below the surface of the milk. Press and hold the button on top of the frother and froth for 30­45 seconds.

4. Remove the frother whisk by twisting it to the left. Keep your cup below the whisk while you carry it to your sink or dishwasher for easy cleaning.
WARNING: To avoid contact with steam and hot surfaces, DO NOT reach across top of brewer to froth.
8 For how-to videos and more, visit ninjakitchen.com

GUIDE TO KEEPING COFFEE HOT The type of cup you brew into can greatly influence the temperature of your coffee when drinking.

CERAMIC CUP

PAPER CUP

Cup Temperature

Room temperature

Pre-warmed with hot water

Pre-warmed in microwave
with milk

Room temperature

Hot
Drinking Temperature

Hotter

Hotter

Hottest

Why is there a difference?

A cold ceramic mug will steal heat from the
coffee as it warms itself up.

If the mug is already warm, it will not steal as much heat from
the coffee.

Just like your cold mug, cold milk lowers the temperature of
your coffee.

Unlike a ceramic mug, a thinner paper cup does not steal substantial heat from the coffee.

NOTE: DO NOT put the carafe in the microwave.

Questions? 1-877-646-5288 9

CAPPUCCINO-STYLE COFFEE

SPECIALT Y

Brew: Specialty Makes: 1 serving (12-ounce cup)

INGREDIENTS
2 Ninja Big Scoops (4 tablespoons) ground coffee
1/2 cup milk
Sweetener, as desired
Ground cinnamon, for garnish

DIRECTIONS
1. Following the measurement provided, place the ground coffee into the filter.
2. Pour milk into a 12-ounce mug. Microwave for 45­60 seconds, then froth for 30 seconds.
3. Set the mug containing frothed milk in place to brew. 4. Press the BREW STYLE button to select
SPECIALTY, then press the START BREW button to begin the brew. 5. When brew is complete, sweeten and garnish as desired.

ICED NUTTY COCOA LATTE

SPECIALT Y

Brew: Specialty Makes: 1 serving (18-ounce cup)

INGREDIENTS

DIRECTIONS

2 Ninja Big Scoops (4 tablespoons) ground coffee
2 tablespoons chocolate syrup, plus more for garnish
1 tablespoon caramel syrup, plus more for garnish

1. Following the measurement provided, place the ground coffee into the filter.
2. Add chocolate syrup, caramel syrup, and ice to an 18-ounce cup and set in place to brew.
3. Press the BREW STYLE button to select SPECIALTY, then press the START BREW button to begin the brew.

2 cups ice 1/2 cup milk 1 tablespoon peanut butter

4. While coffee is brewing, place milk and peanut butter in a large mug, stir to combine, then microwave for 45­60 seconds.
5. When brew is complete, stir to combine.

6. Froth milk mixture for 30 seconds, then gently pour over coffee. Garnish as desired.

10 For how-to videos and more, visit ninjakitchen.com

Notes
11

For questions or to register your product, contact us at 1-877-646-5288 or visit us online at ninjakitchen.com
@ninjakitchen
CFP355A _QSG _ MP_ RE V_ MV5 © 2022 SharkNinja Operating LLC NINJA is a registered trademark of SharkNinja Operating LLC. NINJA SMART SCOOP is a trademark of SharkNinja Operating LLC. All other marks, including KEURIG and K-CUP, are trademarks of their respective owners. K-CUP is a registered trademark of Keurig Green Mountain, Inc. Use of K-CUP trademark does not imply any affiliation with or endorsement by Keurig Green Mountain, Inc.



References

Adobe PDF Library 16.0.3 Adobe InDesign 17.0 (Macintosh)