Installation Guide for HAULYNX models including: OBDII Haul 2.0 Electronic Logging Device, OBDII, Haul 2.0 Electronic Logging Device, Electronic Logging Device, Logging Device, Device

Haulynx ELD

Bluetooth-enabled smartphone or tablet to connect to your truck (See pg. 4 in the ELD. Operation Manual). Haulynx ELD. Black (Male). OBDII. White (Female).

HAUL 2.0 ELECTRONIC LOGGING DEVICE OBDII (VOLVO) …

The Haulynx ELD will flash a RED LED while it connects to the Haulynx servers GPS position. This process may take up to 5 MINUTES. NEXT STEPS Use the Haulynx Mobile App on a Bluetooth …

PDF preview unavailable. Download the PDF instead.

Haulynx ELD - OBD II Installation
HAUL 2.0 ELECTRONIC LOGGING DEVICE
OBDII (VOLVO) INSTALLATION

Installing the HAUL 2.0 Electronic Logging Device in your truck is simple. This guide will quickly walk you through the installation process with an OBDII harness. If you are installing for multiple trucks, please verify you are matching each Haulynx ELD to the corresponding truck as referenced on the included Truck List.

1
Ensure the truck is TURNED OFF.
Connect the Haulynx ELD to the included wiring harness as illustrated.
Haulynx ELD

2
Locate your truck's DIAGNOSTIC PORT, commonly found in one of the following locations: A. Underneath the left side of the dash B. Underneath the steering wheel C. Near the driver's left kick panel D. Beneath the driver's seat
For a discrete (hidden) installation, remove the panel where the DIAGNOSTIC PORT is located and secure the Haulynx ELD and Wiring Harness with zip ties.
AB C
D

3
Connect the BLACK (MALE) OBDII plug to your truck's diagnostic port.
Secure the WHITE (FEMALE) OBDII plug in an accessible location to allow the connection of other devices to the DIAGNOSTIC PORT without unplugging the Haulynx ELD.

For a discrete (hidden) installation, unmount the original Truck Diagnostic Port and mount the Wiring Harness Port in its place.

Truck Diagnostic Port

Wiring Harness Diagnostic Port

4
Turn the TRUCK ON.
The Haulynx ELD will flash a RED LED while it connects to the Haulynx servers and triangulates a GPS position. This process may take up to 5 MINUTES.
If the ELD displays or flashes any other color pattern for more than
! 5 minutes, please contact Haulynx Support at XTsupport@usxpress.com or (800) DRIVER-X.

Once a successful connection is established, the Haulynx ELD will display a constant RED light with a YELLOW flash every 3 seconds.

White (Female) OBDII

CONGRATULATIONS!
You have successfully installed the Haulynx ELD.

Black (Male) OBDII

NEXT STEPS
Use the Haulynx Mobile App on a Bluetooth-enabled smartphone or tablet to connect to your truck (See pg. 4 in the ELD Operation Manual).


Adobe InDesign 16.1 (Macintosh) Adobe PDF Library 15.0