SmallRig FilMov 17mm Threaded Lens Mount Plate
For iPhone 16 Pro / Pro Max
Thank you for purchasing SmallRig's product.
Please read this Operating Instruction carefully. Please follow the safety warnings.
In the Box
- 17mm Threaded Lens Mount Plate × 1
- Guarantee Card × 1
Product Installation
1. When sliding into the backplate, place the side with the circular groove on the inside facing up.
Diagram Description: A line drawing shows the back of an iPhone 16 Pro/Pro Max. The FilMov 17mm lens mount plate is depicted being slid into place. The text indicates that the side with the circular groove should face upwards when sliding into the backplate.
Diagram Description: A diagram shows an upward-pointing arrow with the text "Upward" next to it, indicating the correct orientation or direction of movement.
Compatibility Note: Only compatible with products that include the SmallRig FilMov iPhone 16 Pro / 16 Pro Max case.
Notes
1. Please do not subject the product to severe collisions or impacts.
Specifications
| Attribute | Value |
|---|---|
| Phone Case Dimensions | 1.8 × 1.7 × 0.2in (44.9 × 43.6 × 5.4mm) |
| Product Weight | 0.22oz (6.2g) |
| Material(s) | Aluminum Alloy |
Manufacturer and Compliance
Standard: GB/T 26572-2011
Manufacturer: Shenzhen Leqi Innovation Co., Ltd.
Address: Rooms 103, 501 and 601, Building 5, Fenghe Industrial Park, Nos. 1301-50 Guanguang Road, Longhua District, Shenzhen, Guangdong, China.
Consignor: Shenzhen LC Co., Ltd.
Address: Rooms 602, Building 5, Fenghe Industrial Park, No. 1301-50 Guanguang Road, Xinlan Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
Certifications: CE (European Conformity), ROHS (Restriction of Hazardous Substances), PAP (Certified and Inspected)
Recycling Information: Contains recycling symbols indicating proper sorting and disposal. Made in China.
