Instruction Manual for The WOODEN BED models including: High Quality Wooden Beds, Wooden Beds, Beds
The Wooden Bed Company | High Quality Wooden Beds UK
Bespoke Wooden Beds - Custom Made to your Measurements - The Wooden Bed Company
File Info : application/pdf, 1 Pages, 2.27MB
DocumentDocumentFITTING INSTRUCTIONS WHAT YOU WILL NEED... HEADBOARD 1 PZ2 DRILL BIT DRILL 60MM SCREWS *Included* 35MM SCREWS *Included* SCREW CUPS *Included* BISCUIT JOINTS *Included* Larger beds only LARGER BEDS ONLY Larger beds have 2 biscuit joints between headboard panels. Insert these before pushing into place. 60MM Extra support for central rail only on larger sizes. Position at the bottom. Lay down the headboard panels on the floor with the tenons as shown above, and push the rails into the legs. If your bed doesn't have a headboard, repeat steps 3 & 4 instead of 1 & 2. FOOTBOARD 3 Extra support for central rail only on larger sizes. Position at the bottom. Ensure rails and legs are tightly pushed together and insert the screw cups and 60mm screws into each hole. 4 60MM Extra support for central rail only on larger sizes. Position at the bottom. Extra support for central rail only on larger sizes. Position at the bottom. Lay down the footboard pieces on the floor with the tenons as shown above, and push the rails into the legs. SIDE PANELS 5 In order to get the strongest connection ensure the tenons are inserted fully into the mortises with the rails tight up against the posts. ! Support for bed slats. Position on the inside... Level with frame: Position at the top. Within Frame: Position at the bottom. Ensure the rails and legs are tightly pushed together and insert the screw cups and 60mm screws into each hole. 6 ! Support for bed slats. Position on the inside... Level with frame: Position at the top. Within Frame: Position at the bottom. 60MM Push the side panels into the legs of the headboard and footboard, ensuring the supporting bars for the bed slats are on the inside. It is often easier to get help with this. Ensure rails and legs are tightly pushed together and insert the screw cups and 60mm screws into each hole. ADDITIONAL LEGS LARGER BEDS ONLY CENTRAL RAIL LARGER BEDS ONLY 7 8 60MM 35MM ! Support for bed slats relative to slat position. If your bed has a central rail and additional supporting legs, screw the supporting legs into position on the central rail with 60mm screws. SLATS 9 Place the central rail in the middle of the bed onto the extra support and secure down with 35mm screws. 10 35MM Place the slats on the frame ensuring they are evenly spaced. 11 ADD YOUR MATTRESS AND BEDDING, THEN ENJOY! Once you are happy with the position of the slats, fix securely into position with the 35mm screws. No screw cups necessary. To be used as a guide only. Some beds may have more rails or don't have headboards. If you need any help assembling your bed, please don't hesitate to get in touch with us and we will be happy to help. WWW.THEWOODENBEDCOMPANY.COM INFO@THEWOODENBEDCOMPANY.CO.UK 01287 236623