WOODBRIDGE Bathtub Specifications
This document provides important information and detailed measurements for WOODBRIDGE bathtubs. Please review all specifications before installation.
Important Information
- Measurements are approximate, with a tolerance of ± 1/2 inch, and are subject to change without notice.
- Specifications and configurations are subject to change without notice.
- It is crucial to measure the tub on-site before proceeding with installation.
- The measurements provided herein supersede any previously published information.
- Consider future access to equipment when ordering or installing the bathtub.
Dimensions and Diagram
The following diagram illustrates the key dimensions of the WOODBRIDGE bathtub. All measurements are provided in both imperial and metric units.
Dimension | Imperial | Metric |
---|---|---|
Overall Length | 59" | 1500mm |
Overall Width (at widest point) | 29-1/2" | 750mm |
Overall Width (at narrowest point) | 21-1/2" | 545mm |
Height (at highest point) | 29-1/2" | 750mm |
Height (at lowest point) | 21-5/8" | 550mm |
Base Length | 44-1/8" | 1120mm |
Base Width | 10-1/4" | 260mm |
Rim Thickness (at narrow end) | 3/8" | 8mm |
Rim Thickness (at wide end) | 2-3/8" | 60mm |
Wall Thickness (at base) | 7/8" | 22mm |
Slope Angle | 3/4" | 18mm |
Inner Length (at base) | 43-1/4" | 1098mm |
Inner Width (at widest point) | 29-1/2" | 750mm |
Inner Width (at narrowest point) | 3-1/8" | 80mm |
Drain Diameter | 2" | 50mm |
Drain to Edge Distance | 12-5/8" | 320mm |
Drain to Side Distance | (approx.) | |
Water Depth | 15-3/8" | 390mm |
Note: The diagram shows a top-down view and a side profile view of the bathtub, indicating various lengths, widths, heights, and thicknesses. The water depth is also indicated in a cross-section view.
Contact and More Information
For more details and product information, please visit www.woodbridgebath.com.