Music Tribe
Turbosound | Home
Music Tribe
User Guide for Turbosound models including: KT10-HP, KT12-HP, KT15-HP, KT-HP Series 2 Way Full Range Loudspeaker, KT-HP Series, 2 Way Full Range Loudspeaker, Full Range Loudspeaker, Range Loudspeaker, Loudspeaker
Пассивная акустика TURBOSOUND KT12-HP, цена: 59 158 руб - купить в Галерее безупречной электроники Назаров
File Info : application/pdf, 12 Pages, 3.43MB
DocumentDocumentQuick Start Guide KT-HP Series KT10-HP 2-Way 10" Full-Range Loudspeaker for KTV Applications KT12-HP 2-Way 12" Full-Range Loudspeaker for KTV Applications KT15-HP 2-Way 15" Full-Range Loudspeaker for KTV Applications V 0.0 2 KT10 HP , KT12-HP and KT15-HP (EN) Safety Instruction 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Use only attachments/accessories specified by the manufacturer. 10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 11. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service. 12. Do not install in a confined space, such as a book case or similar unit. 13. Do not place naked flame sources, such as lighted candles, on the apparatus. (ES) Instrucción de seguridad 1. Lea las instrucciones. 2. Conserve estas instrucciones. 3. Preste atención a todas las advertencias. 4. Siga todas las instrucciones. 5. No use este aparato cerca del agua. 6. Limpie este aparato con un paño seco. 7. No bloquee las aberturas de ventilación. Instale el equipo de acuerdo con las instrucciones del fabricante. 8. No instale este equipo cerca de fuentes de calor tales como radiadores, acumuladores de calor, estufas u otros aparatos (incluyendo amplificadores) que puedan producir calor. 9. Use únicamente los dispositivos o accesorios especificados por el fabricante. 10. Use únicamente la carretilla, plataforma, trípode, soporte o mesa especificados por el fabricante o suministrados junto con el equipo. Al transportar el equipo, tenga cuidado para evitar daños y caídas al tropezar con algún obstáculo. 11. Cómo debe deshacerse de este aparato: Este símbolo indica que este aparato no debe ser tratado como basura orgánica, según lo indicado en la Directiva WEEE (2012/19/EU) y a las normativas aplicables en su país. En lugar de ello deberá llevarlo al punto limpio más cercano para el reciclaje de sus elementos eléctricos / electrónicos (EEE). Al hacer esto estará ayudando a prevenir las posibles consecuencias negativas para el medio ambiente y la salud que podrían ser provocadas por una gestión inadecuada de este tipo de aparatos. Además, el reciclaje de materiales ayudará a conservar los recursos naturales. Para más información acerca del reciclaje de este aparato, póngase en contacto con el Ayuntamiento de su ciudad o con el punto limpio local. 12. No instale esta unidad en un espacio muy reducido, tal como encastrada en una librería o similar. 13. No coloque objetos con llama, como una vela encendida, sobre este aparato. (FR) Consignes de sécurité 1. Lisez ces consignes. 2. Conservez ces consignes. 3. Respectez tous les avertissements. 4. Respectez toutes les consignes d'utilisation. 5. N'utilisez jamais l'appareil à proximité d'un liquide. 6. Nettoyez l'appareil avec un chiffon sec. 7. Veillez à ne pas empêcher la bonne ventilation de l'appareil via ses ouïes de ventilation. Respectez les consignes du fabricant concernant l'installation de l'appareil. 8. Ne placez pas l'appareil à proximité d'une source de chaleur telle qu'un chauffage, une cuisinière ou tout appareil dégageant de la chaleur (y compris un ampli de puissance). 9. Utilisez exclusivement des accessoires et des appareils supplémentaires recommandés par le fabricant. 10. Utilisez exclusivement des chariots, des diables, des présentoirs, des pieds et des surfaces de travail recommandés par le fabricant ou livrés avec le produit. Déplacez précautionneusement tout chariot ou diable chargé pour éviter d'éventuelles blessures en cas de chute. 11. Mise au rebut appropriée de ce produit: Ce symbole indique qu'en accord avec la directive DEEE (2012/19/EU) et les lois en vigueur dans votre pays, ce produit ne doit pas être jeté avec les déchets ménagers. Ce produit doit être déposé dans un point de collecte agréé pour le recyclage des déchets d'équipements électriques et électroniques (EEE). Une mauvaise manipulation de ce type de déchets pourrait avoir un impact négatif sur l'environnement et la santé à cause des substances potentiellement dangereuses généralement associées à ces équipements. En même temps, votre coopération dans la mise au rebut de ce produit contribuera à l'utilisation efficace des ressources naturelles. Pour plus d'informations sur l'endroit où vous pouvez déposer vos déchets d'équipements pour le recyclage, veuillez contacter votre mairie ou votre centre local de collecte des déchets. 12. N'installez pas l'appareil dans un espace confiné tel qu'une bibliothèque ou meuble similaire. 13. Ne placez jamais d'objets enflammés, tels que des bougies allumées, sur l'appareil. Quick Start Guide 3 (DE) Wichtige Sicherhteitshinweise 1. Lesen Sie diese Hinweise. 2. Bewahren Sie diese Hinweise auf. 3. Beachten Sie alle Warnhinweise. 4. Befolgen Sie alle Bedienungshinweise. 5. Betreiben Sie das Gerät nicht in der Nähe von Wasser. 6. Reinigen Sie das Gerät mit einem trockenen Tuch. 7. Blockieren Sie nicht die Belüftungsschlitze. Beachten Sie beim Einbau des Gerätes die Herstellerhinweise. 8. Stellen Sie das Gerät nicht in der Nähe von Wärmequellen auf. Solche Wärmequellen sind z. B. Heizkörper, Herde oder andere Wärme erzeugende Geräte (auch Verstärker). 9. Verwenden Sie nur Zusatzgeräte/Zubehörteile, die laut Hersteller geeignet sind. 10. Verwenden Sie nur Wagen, Standvorrichtungen, Stative, Halter oder Tische, die vom Hersteller benannt oder im Lieferumfang des Geräts enthalten sind. Falls Sie einen Wagen benutzen, seien Sie vorsichtig beim Bewegen der Wagen-Gerätkombination, um Verletzungen durch Stolpern zu vermeiden. 11. Korrekte Entsorgung dieses Produkts: Dieses Symbol weist darauf hin, das Produkt entsprechend der WEEE Direktive (2012/19/EU) und der jeweiligen nationalen Gesetze nicht zusammen mit Ihren Haushaltsabfällen zu entsorgen. Dieses Produkt sollte bei einer autorisierten Sammelstelle für Recycling elektrischer und elektronischer Geräte (EEE) abgegeben werden. Wegen bedenklicher Substanzen, die generell mit elektrischen und elektronischen Geräten in Verbindung stehen, könnte eine unsachgemäße Behandlung dieser Abfallart eine negative Auswirkung auf Umwelt und Gesundheit haben. Gleichzeitig gewährleistet Ihr Beitrag zur richtigen Entsorgung dieses Produkts die effektive Nutzung natürlicher Ressourcen. Für weitere Informationen zur Entsorgung Ihrer Geräte bei einer Recycling-Stelle nehmen Sie bitte Kontakt zum zuständigen städtischen Büro, Entsorgungsamt oder zu Ihrem Haushaltsabfallentsorger auf. 12. Installieren Sie das Gerät nicht in einer beengten Umgebung, zum Beispiel Bücherregal oder ähnliches. 13. Stellen Sie keine Gegenstände mit offenen Flammen, etwa brennende Kerzen, auf das Gerät. (PT) Instruções de Seguranç Importantes 1. Leia estas instruções. 2. Guarde estas instruções. 3. Preste atenção a todos os avisos. 4. Siga todas as instruções. 5. Não utilize este dispositivo perto de água. 6. Limpe apenas com um pano seco. 7. Não obstrua as entradas de ventilação. Instale de acordo com as instruções do fabricante. 8. Não instale perto de quaisquer fontes de calor tais como radiadores, bocas de ar quente, fogões de sala ou outros aparelhos (incluindo amplificadores) que produzam calor. 9. Utilize apenas ligações/acessórios especificados pelo fabricante. 10. Utilize apenas com o carrinho, estrutura, tripé, suporte, ou mesa especificados pelo fabricante ou vendidos com o dispositivo. Quando utilizar um carrinho, tenha cuidado ao mover o conjunto carrinho/ dispositivo para evitar danos provocados pela terpidação. 11. Correcta eliminação deste produto: este símbolo indica que o produto não deve ser eliminado juntamente com os resíduos domésticos, segundo a Directiva REEE (2012/19/EU) e a legislação nacional. Este produto deverá ser levado para um centro de recolha licenciado para a reciclagem de resíduos de equipamentos eléctricos e electrónicos (EEE). O tratamento incorrecto deste tipo de resíduos pode ter um eventual impacto negativo no ambiente e na saúde humana devido a substâncias potencialmente perigosas que estão geralmente associadas aos EEE. Ao mesmo tempo, a sua colaboração para a eliminação correcta deste produto irá contribuir para a utilização eficiente dos recursos naturais. Para mais informação acerca dos locais onde poderá deixar o seu equipamento usado para reciclagem, é favor contactar os serviços municipais locais, a entidade de gestão de resíduos ou os serviços de recolha de resíduos domésticos. 12. Não instale em lugares confinados, tais como estantes ou unidades similares. 13. Não coloque fontes de chama, tais como velas acesas, sobre o aparelho. (IT) Istruzioni di sicurezza importanti 1. Leggere queste istruzioni. 2. Conservare queste istruzioni. 3. Prestare attenzione a tutti gli avvisi. 4. Applicare tutte le istruzioni. 5. Non utilizzare questo dispositivo vicino l'acqua. 6. Pulire esclusivamente con un panno asciutto. 7. Non bloccare le aperture di ventilazione. Installare in conformità con le istruzioni del produttore. 8. Non installare vicino a fonti di calore come radiatori, termoregolatori, stufe o altri apparecchi (inclusi amplificatori) che producono calore. 9. Utilizzare esclusivamente dispositivi/accessori specificati dal produttore. 10. Utilizzare solo carrelli, supporti, treppiedi, staffe o tavoli indicati dal produttore o venduti con l'apparecchio. Utilizzando un carrello, prestare attenzione quando si sposta la combinazione carrello/apparecchio per evitare lesioni dovute al ribaltamento. 11. Smaltimento corretto di questo prodotto: questo simbolo indica che questo dispositivo non deve essere smaltito insieme ai rifiuti domestici, secondo la Direttiva RAEE (2012/19 / UE) e la vostra legislazione nazionale. Questo prodotto deve essere portato in un centro di raccolta autorizzato per il riciclaggio di rifiuti di apparecchiature elettriche ed elettroniche (RAEE). La cattiva gestione di questo tipo di rifiuti potrebbe avere un possibile impatto negativo sull'ambiente e sulla salute umana a causa di sostanze potenzialmente pericolose che sono generalmente associate alle apparecchiature elettriche ed elettroniche. Nello stesso tempo la vostra collaborazione al corretto smaltimento di questo prodotto contribuirà all'utilizzo efficiente delle risorse naturali. Per ulteriori informazioni su dove è possibile trasportare le apparecchiature per il riciclaggio vi invitiamo a contattare l'ufficio comunale locale o il servizio di raccolta dei rifiuti domestici. 12. Non installare in uno spazio ristretto, come in una libreria o in una struttura simile. 13. Non collocare sul dispositivo fonti di fiamme libere, come candele accese. 4 KT10 HP , KT12-HP and KT15-HP (NL) Belangrijke veiligheidsvoorschriften 1. Lees deze voorschriften. 2. Bewaar deze voorschriften. 3. Neem alle waarschuwingen in acht. 4. Volg alle voorschriften op. 5. Gebruik dit apparaat niet in de buurt van water. 6. Reinig het uitsluitend met een droge doek. 7. Let erop geen van de ventilatie-openingen te bedekken. Plaats en installeer het volgens de voor-schriften van de fabrikant. 8. Het apparaat mag niet worden geplaatst in de buurt van radiatoren, warmte-uitlaten, kachels of andere zaken (ook versterkers) die warmte afgeven. 9. Gebruik uitsluitend door de producent gespeci-ficeerd toebehoren c.q. onderdelen. 10. Gebruik het apparaat uitsluitend in combinatie met de wagen, het statief, de driepoot, de beugel of tafel die door de producent is aangegeven, of die in combinatie met het apparaat wordt verkocht. Bij gebruik van een wagen dient men voorzichtig te zijn bij het verrijden van de combinatie wagen/apparaat en letsel door vallen te voorkomen. 11. Correcte afvoer van dit product: dit symbool geeft aan dat u dit product op grond van de AEEA-richtlijn (2012/19/EU) en de nationale wetgeving van uw land niet met het gewone huishoudelijke afval mag weggooien. Dit product moet na afloop van de nuttige levensduur naar een officiële inzamelpost voor afgedankte elektrische en elektronische apparatuur (AEEA) worden gebracht, zodat het kan worden gerecycleerd. Vanwege de potentieel gevaarlijke stoffen die in elektrische en elektronische apparatuur kunnen voorkomen, kan een onjuiste afvoer van afval van het onderhavige type een negatieve invloed op het milieu en de menselijke gezondheid hebben. Een juiste afvoer van dit product is echter niet alleen beter voor het milieu en de gezondheid, maar draagt tevens bij aan een doelmatiger gebruik van de natuurlijke hulpbronnen. Voor meer informatie over de plaatsen waar u uw afgedankte apparatuur kunt inleveren, kunt u contact opnemen met uw gemeente of de plaatselijke reinigingsdienst. 12. Installeer niet in een kleine ruimte, zoals een boekenkast of iets dergelijks. 13. Plaats geen open vlammen, zoals brandende kaarsen, op het apparaat. (SE) Viktiga säkerhetsanvisningar 1. Läs dessa anvisningar. 2. Spara dessa anvisningar. 3. Beakta alla varningar. 4. Följ alla anvisningar. 5. Använd inte apparaten i närheten av vatten. 6. Rengör endast med torr trasa. 7. Blockera inte ventilationsöppningarna. Installera enligt tillverkarens anvisningar. 8. Installera aldrig intill värmekällor som värme-element, varmluftsintag, spisar eller annan utrustning som avger värme (inklusive förstärkare). 9. Använd endast tillkopplingar och tillbehör som angetts av tillverkaren. 10. Använd endast med vagn, stativ, trefot, hållare eller bord som angetts av tillverkaren, eller som sålts till-sammans med apparaten. Om du använder en vagn, var försiktig, när du förflyttar kombinationen vagn-apparat, för att förhindra olycksfall genom snubbling. 11. Kassera produkten på rätt sätt: den här symbolen indikerar att produkten inte ska kastas i hushållssoporna, enligt WEEE direktivet (2012/19/EU) och gällande, nationell lagstiftning. Produkten ska lämnas till ett auktoriserat återvinningsställe för elektronisk och elektrisk utrustning (EEE). Om den här sortens avfall hanteras på fel sätt kan miljön, och människors hälsa, påverkas negativt på grund av potentiella risksubstanser som ofta associeras med EEE. Avfallshanteras produkten däremot på rätt sätt bidrar detta till att naturens resurser används på ett bra sätt. Kontakta kommun, ansvarig förvaltning eller avfallshanteringsföretag för mer information om återvinningscentral där produkten kan lämnas. 12. Installera inte i ett trångt utrymme, t.ex. i en bokhylsa eller liknande enhet. 13. Placera inte källor med öppen eld, t.ex. tända ljus, på apparaten. (PL) Wane informacje o bezpieczestwie 1. Prosz przeczyta ponisze wskazówki. 2. Prosz przechowywa niniejsz instrukcj. 3. Naley przestrzega wszystkich wskazówek ostrzegawczych. 4. Naley postpowa zgodnie z instrukcj obslugi. 5. Urzdzenia nie wolno uywa w pobliu wody. 6. Urzdzenie mona czyci wylcznie such szmatk. 7. Nie zaslania otworów wentylacyjnych. W czasie podlczania urzdzenia naley przestrzega zalece producenta. 8. Nie stawia urzdzenia w pobliu ródel ciepla takich, jak grzejniki, piece lub urzdzenia produkujce cieplo (np. wzmacniacze). 9. Uywa wylcznie sprztu dodatkowego i akcesoriów zgodnie z zaleceniami producenta. 10. Uywa jedynie zalecanych przez producenta lub znajdujcych si w zestawie wózków, stojaków, statywów, uchwytów i stolów. W przypadku poslugiwania si wózkiem naley zachowa szczególn ostrono w trakcie przewoenia zestawu, aby unikn niebezpieczestwa potknicia si i zranienia. 11. Prawidlowa utylizacja produktu: Ten symbol wskazuje, e tego produktu nie naley wyrzuca razem ze zwyklymi odpadami domowymi, tylko zgodnie z dyrektyw w sprawie zuytego sprztu elektrycznego i elektronicznego (WEEE) (2012/19/ EU) oraz przepisami krajowymi. Niniejszy produkt naley przekaza do autoryzowanego punktu zbiórki zuytego sprztu elektrycznego i elektronicznego. Niewlaciwe postpowanie z tego typu odpadami moe wywola szkodliwe dzialanie na rodowisko naturalnej i zdrowie czlowieka z powodu potencjalnych substancji niebezpiecznych zaliczanych jako zuyty sprzt elektryczny i elektroniczny. Jednoczenie, Twój wklad w prawidlow utylizacj niniejszego produktu przyczynia si do oszczdnego wykorzystywania zasobów naturalnych. Szczególowych informacji o miejscach, w których mona oddawa zuyty sprzt do recyklingu, udzielaj urzdy miejskie, przedsibiorstwa utylizacji odpadów lub najbliszy zaklad utylizacji odpadów. 12. Nie instaluj w ograniczonej przestrzeni, takiej jak pólka na ksiki lub podobny zestaw. 13. Nie stawiaj na urzdzeniu ródel otwartego ognia, takich jak zapalone wiece. (CN) 1. 2. 3. 4. 5. 6. 7. , , 8. , , , 9. 10. , , , , , 11. , , , , Quick Start Guide 5 6 KT10 HP , KT12-HP and KT15-HP Welcome Thank you for choosing a Turbosound loudspeaker product for your application. If you would like further information about this or any other product, please visit our website at turbosound.com. Unpacking the Loudspeaker After unpacking the unit, please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim. Please retain all packaging in case of future return shipment. About this Quick Start Guide This QSG describes details of the KT10 HP, KT12-HP, and KT15-HP loudspeakers and shows various options such as mounting on a pole or tripod, suspending with eyebolts, and mounting in portrait or landscape orientation. The instructions do not show details of external lifting equipment and do not contain details of safe lifting procedures or installation. Possession of these instructions and procedures does not imply authorisation for their use. General Safety The operation of your product as part of a suspended system, if installed incorrectly and improperly, can potentially expose persons to serious health risks and even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualified and certified (by local, state or national authorities) personnel prior to any installation or flying. Installation and setup should only be carried out by qualified and authorised personnel observing the valid local, state and other safety regulations applicable in your country. If any parts or components are missing please contact your dealer before attempting to set up the system. It is the responsibility of the person installing the assembly to ensure that the suspension/fixing points are suitable for the intended use. We also recommend you schedule Turbosound training with our sales partners and applications team. Equipment used to connect to the Turbosound rigging system must be properly rated and must conform to the local, state and other safety regulations. Do not use Turbosound rigging with other types or brands of loudspeakers. This practice may compromise safety standards and Music Tribe Global Brands Ltd will not be responsible for damage or injury so caused. Welding, or any other means of permanently fixing rigging components to each other or to cabinet fixing points is not allowed. Rigging components or assemblies must only be fixed to Turbosound loudspeaker cabinets using the cabinet fixing points. Music Tribe Global Brands Ltd assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular checks must be conducted by qualified personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the product is suspended, the area underneath the product is free of human traffic. Do not suspend the product in areas which can be entered or used by members of the public. Speakers create magnetic field, even if not in operation. Therefore, please keep all materials that can be affected by such fields (discs, computers, monitors, etc) at a safe distance, usually between 1 and 2 metres away. Secondary Safeties All loudspeakers flown in theatres, studios or other places of work and entertainment shall, in addition to the principle load bearing means of suspension, be provided with an independent, properly rated, and securely attached secondary safety. Only steel wire ropes or steel chains of an approved construction and load rating shall be used as secondary safeties. Plastic-covered steel wire ropes are not permitted for use as secondary safeties. The secondary safety suspension must be independent of the primary suspension points and capable of carrying the total system weight. The additional safety device must be mounted in a way that the loudspeaker is caught by the safety device without any drop and swing, in the event that the primary suspension fails. Operational Safety The procedures require the use of two or more authorised persons. Produce a lift plan: before any lift takes place, you must formulate a lift plan that describes the exact steps and procedures that will be carried out. The plan must be shared with all assistants and stake-holders in the lift so that each person will understand their responsibilities. Observe all instructions given on the respective instruction labels of the rigging components and loudspeakers. When using chain hoists, make sure nobody is directly underneath or in the vicinity of the loudspeakers. During assembly pay attention to the possible risk of crushing. Wear suitable protective clothing. Quick Start Guide 7 Safety Inspections Carefully inspect rigging system components and cabinets for defects or signs of damage before proceeding to assemble the speaker to be flown. If any parts are damaged or suspect, or if there is any doubt as to the proper functioning and safety of the items DO NOT USE THEM and withdraw them from use immediately. System Requirements The KT Series of 2-way loudspeaker operates as a passive system and requires only one amplifier channel. The input signal is divided between the low-frequency and high frequency drivers internally with a passive crossover. Amplifier Considerations The KT series loudspeakers are optimized for use with the Lab Gruppen PD & PDX series amplifiers The use of third party amplification and processing is only advised using professional loudspeaker limiter calculator The KT series enclosures should be driven by high quality power amplifiers designed for true professional use. Power amplifiers should be capable of delivering long term broadband power, equal to half the loudspeaker's peak power rating at its stated nominal impedance. The use of underpowered amplifiers must be avoided as heavily clipped signals can cause permanent loudspeaker damage. Model Impedance Loudspeaker Minimum Amplifier Power KT10-HP 8 Continuous Power 350 Continuous Power 700 Peak Power (4 x continuous) 1400 KT12-HP 8 500 1000 2000 KT15-HP 8 650 1300 2600 Limiters, crossovers and equalisation points must be set in accordance with the settings provided on the Turbosound website. This will ensure the optimum sound quality and long-term reliability as well as protection from damage. System Cabling Requirements To avoid wasting amplifier power, you should use heavy-duty speaker cable with a minimum wire size of 2.5 mm² (14 AWG), and preferably 4 mm² (12 AWG) for longer runs or where total cabinet input impedance is less than 8 ohms. For extreme cable lengths, be aware of cable impedance and resistive losses. Always observe the correct polarity. Use genuine NEUTRIK SPEAKON CONNECTORS for reliable operation. Attach and support the speaker cables from your amplifiers to the loudspeaker cabinets, so that no significant additional weight or lateral force is applied to the speakers by the input wiring. Input cables or link cables should never be used to angle the speakers or used as rigging in any way. 8 KT10 HP , KT12-HP and KT15-HP Stereo System Example The example below shows a Lab.gruppen PD3000 Amplifier used in Stereo mode and full frequency range, with two KT12-HP speakers. Both speaker cables are wired Pin 1 +/-. Lab.gruppen PD3000 Amplifier Audio Inputs Turbosound KT12-HP NL2 - NL2 wired Pin 1+/- NL2 - NL2 wired Pin 1+/- Stereo Mode Channel A and B Full Range Turbosound KT12-HP Connections Caution: The speaker inpedance is 8 Ohms. Do not Link more than 2 speakers per channel, unless your amplifier can handle loads less than 4 Ohms. Mode Passive Back Panel Connector Full Range Input + Full Range Input - Internal Schematic 1+ NL4 Input/ Link 12+ 2- 1- 1+ 2+ 2- 1+ NL4 Input/ Link 12+ 2- + FR - Installation Safety Warning: Only authorised and certified personnel shall design and install suspended configurations. Incorrect installation may lead to death or permanent injury Walls, floors or ceilings must be capable of safely and securely supporting the actual load. The mounting accessory used must be safely and securely fixed both to the loudspeaker and to the wall, floor or ceiling. When mounting rigging components on walls, floors or ceilings, ensure that all fixings and fasteners used are of an appropriate size and load rating. Wall and ceiling claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular fixing arrangement can be safely employed for a particular load. Cavity plugs or other specialist fixings, if required, must be of an appropriate type, and must be fitted and used in accordance with the maker's instructions. The use of a secondary safety is a mandatory safety requirement. The KT speaker cabinet has an integral pole mount hole and M10 mounting holes with fitted hex socket head screws. Caution: As the KT series loudspeakers are rear ported, it is important to leave a gap of 50 mm or more, to allow low frequency energy to exit the rear ports. M10 Mounting Holes with Screws >50mm Quick Start Guide 9 Pole Mount One 35 mm pole mount socket is provided for pole mounting in the vertical position. The speaker can be pole mounted on a suitable tripod stand. Suspending with Eyebolts KT Series cabinets can be suspended using optional eyebolts coupled to the internal rigging points provided on the top, bottom and sides and back. The simplest method is to use the two rigging points on the top and a single pull-back rigging point in the centre of the rear panel. Use another eyebolt on top for the secondary safety cable. Remove the appropriate countersunk screws and replace them with shoulder eyebolts, which must have a thread length of at least 40 mm. Use the rear rigging point to angle the cabinet for optimum room coverage. Cabinets may be hung upside down if required. Badge Rotation The Turbosound badge can be rotated by hand to suit vertical or horizontal positioning. 10 KT10 HP , KT12-HP and KT15-HP Horn Rotation The MF/HF Horn assembly can be removed and reinstalled in a different orientation to suit desired configurations and coverage. For example, if the speaker is used in landscape mode, then rotate the horn by 90 degrees to maintain the same horizontal and vertical beamwidths/coverage as in the portrait mode. Portrait Remove the 8 M5 hexagonal socket screws securing the horn assembly to the cabinet. Landscape (Horn Rotated) Carefully pull the horn assembly forward, just enough to be able to rotate the assembly to the desired orientation. Reinstall the horn with the 8 screws. Make sure the wiring is intact and not pinched. Follow the procedure below to rotate the horn: Remove the grille by undoing the six crosshead screws on each side. Reinstall the grille, and make a note that the speaker has been modified. 11 Turbosound , turbosound.com , , , QSG KT10-HP, KT12-HP KT15-HP , , , , , , , / , / Turbosound Turbosound , Turbosound , Music Tribe Global Brands Ltd , , Turbosound Music Tribe Global Brands Ltd , , , EASE Focus 3 , , , , , : , , , , , , , , 12 KT10 HP , KT12-HP and KT15-HP KT10-HP, KT12-HP KT15-HP , KT , Lab Gruppen PD PDX KT , , Model 4 x KT10-HP 8 350 700 1400 KT12-HP 8 500 KT15-HP 8 650 1000 1300 2000 2600 Turbosound , 8 , 2.5 mm² 14 AWG , 4 mm² 12 AWG , NEUTRIK SPEAKON , Lab.gruppen PD3000 , KT12-HP 1 +/- 13 Lab.gruppen PD3000 Amplifier Audio Inputs Turbosound KT12-HP NL2 - NL2 wired Pin 1+/- NL2 - NL2 wired Pin 1+/- Stereo Mode Channel A and B Full Range Turbosound KT12-HP : 8 2 , 4 Mode Passive Back Panel Connector Full Range Input + Full Range Input - Internal Schematic 1+ NL4 Input/ Link 12+ 2- 1- 1+ 2+ 2- 1+ NL4 Input/ Link 12+ 2- + FR - 14 KT10 HP , KT12-HP and KT15-HP : , , , , M10 , M10 , 50 , KT , , 40 , , M10 Turbosound , 35 , >50mm MF/HF , , , 90 / Portrait 8 M5 Landscape (Horn Rotated) , 8 , , 15 590mm [23.23"] 635mm [25"] 16 KT10 HP and KT12-HP Dimensions KT12-HP 394mm [15.51"] 375mm [14.76"] KT10-HP 400mm [15.75"] 322mm [12.68"] 700mm [27.56"] KT15-HP 460mm [18.11"] 400mm [16.14"] Quick Start Guide 17 18 KT10 HP , KT12-HP and KT15-HP Specifications System Frequency Response (±3dB)¹ Frequency Response(-10dB)¹ Nominal dispersion @ -6 dB points Power handling (IEC)² System Sensitivity (1 W @ 1 m)¹ Maximum SPL³ Impedance Crossover type Components Enclosure Connectors Dimensions H x W x D Net weight Construction Finish Grille Flying hardware UV rating KT10-HP 80 Hz - 20 kHz 48 Hz - 20 kHz 350 W continuous, 1400 W peak 96 dB (1 W @ 1 m) 127 dB (133 dB peak) 1 x 1.4" (35 mm) voice coil Polymide diaphragm HF compression driver, 1 x 10" (250 mm) LF driver 2 x Neutrik speakON NL4 (1+/1- Input,2+/2- Link) 590 x 322 x 400 mm 20 kg (44.1 lbs) 1. Free field conditions,Measured at 1 metre on axis. 2. MT standard with crest factor 6 dB pink noise. 3. Calculated based on the rated power.crest factor 4 pink noise. KT12-HP KT15-HP 72 Hz - 20 kHz 44 Hz - 20 kHz 80°(H) x 60°(V) 500 W continuous, 2000 W peak 98 dB (1 W @ 1 m) 131 dB (137 dB peak) 8 Passive 1 x 1.4" (35 mm) voice coil Polymide diaphragm HF compression driver, 1 x 12" (315 mm) LF driver 70 Hz - 20 kHz 43 Hz - 20 kHz 650 W continuous, 2600 W peak 99 dB (1 W @ 1 m) 133 dB (139 dB peak) 1 x 1.75" (44.4 mm) voice coil Polymide diaphragm HF compression driver, 1 x 15" (380 mm) LF driver 2 x Neutrik speakON NL4 (1+/1- Input,2+/2- Link) 635 x 375 x 394 mm 26.3 kg (58 lbs) 12 mm and 15 mm (1/2" and 5/8") plywood Black texture paint Powder coated perforated steel M10 x 19 4-5 (ASTM G155-21) 2 x Neutrik speakON NL4 (1+/1- Input,2+/2- Link) 700 x 410 x 460 mm 31.5 kg (69.4 lbs) Other important information Quick Start Guide 19 Important information Informations importantes Outras Informações Importantes 1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable. 2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under "Support" at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our "Online Support" which may also be found under "Support" at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product. 1. Enregistrez-vous en ligne. Prenez le temps d'enregistrer votre produit Music Tribe aussi vite que possible sur le site Internet musictribe.com. Le fait d'enregistrer le produit en ligne nous permet de gérer les réparations plus rapidement et plus efficacement. Prenez également le temps de lire les termes et conditions de notre garantie. 1. Registre-se online. Por favor, registre seu novo equipamento Music Tribe logo após a compra visitando o site musictribe.com Registrar sua compra usando nosso simples formulário online nos ajuda a processar seus pedidos de reparos com maior rapidez e eficiência. Além disso, leia nossos termos e condições de garantia, caso seja necessário. 2. Dysfonctionnement. Si vous n'avez pas de revendeur Music Tribe près de chez vous, contactez le distributeur Music Tribe de votre pays : consultez la liste des distributeurs de votre pays dans la page "Support" de notre site Internet musictribe.com. Si votre pays n'est pas dans la liste, essayez de résoudre votre problème avec notre "aide en ligne" que vous trouverez également dans la section "Support" du site musictribe.com. Vous pouvez également nous faire parvenir directement votre demande de réparation sous garantie par Internet sur le site musictribe.com AVANT de nous renvoyer le produit. 2. Funcionamento Defeituoso. Caso seu fornecedor Music Tribe não esteja localizado nas proximidades, você pode contatar um distribuidor Music Tribe para o seu país listado abaixo de "Suporte" em musictribe.com. Se seu país não estiver na lista, favor checar se seu problema pode ser resolvido com o nosso "Suporte Online" que também pode ser achado abaixo de "Suporte"em musictribe.com. Alternativamente, favor enviar uma solicitação de garantia online em musictribe.com ANTES da devolução do produto. Aspectos importantes Weitere wichtige Informationen Informazioni importanti 1. Registro online. Le recomendamos que registre su nuevo aparato Music Tribe justo después de su compra accediendo a la página web musictribe.com. El registro de su compra a través de nuestro sencillo sistema online nos ayudará a resolver cualquier incidencia que se presente a la mayor brevedad posible. Además, aproveche para leer los términos y condiciones de nuestra garantía, si es aplicable en su caso. 2. Averías. En el caso de que no exista un distribuidor Music Tribe en las inmediaciones, puede ponerse en contacto con el distribuidor Music Tribe de su país, que encontrará dentro del apartado "Support" de nuestra página web musictribe.com. En caso de que su país no aparezca en ese listado, acceda a la sección "Online Support" (que también encontrará dentro del apartado "Support" de nuestra página web) y compruebe si su problema aparece descrito y solucionado allí. De forma alternativa, envíenos a través de la página web una solicitud online de soporte en periodo de garantía ANTES de devolvernos el aparato. 1. Online registrieren. Bitte registrieren Sie Ihr neues Music Tribe-Gerät direkt nach dem Kauf auf der website musictribe.com. Wenn Sie Ihren Kauf mit unserem einfachen online Formular registrieren, können wir Ihre Reparaturansprüche schneller und effizienter bearbeiten. Lesen Sie bitte auch unsere Garantiebedingungen, falls zutreffend. 2. Funktionsfehler. Sollte sich kein Music Tribe Händler in Ihrer Nähe befinden, können Sie den Music Tribe Vertrieb Ihres Landes kontaktieren, der auf musictribe.com unter ,,Support" aufgeführt ist. Sollte Ihr Land nicht aufgelistet sein, prüfen Sie bitte, ob Ihr Problem von unserem ,,Online Support" gelöst werden kann, den Sie ebenfalls auf musictribe.com unter ,,Support" finden. Alternativ reichen Sie bitte Ihren Garantieanspruch online auf musictribe.com ein, BEVOR Sie das Produkt zurücksenden. 1. Registratevi online. Vi invitiamo a registrare il nuovo apparecchio Music Tribe subito dopo averlo acquistato visitando musictribe.com. La registrazione dell'acquisto tramite il nostro semplice modulo online ci consente di elaborare le richieste di riparazione in modo più rapido ed efficiente. Leggete anche i termini e le condizioni della nostra garanzia, qualora applicabile. 2. Malfunzionamento. Nel caso in cui il rivenditore autorizzato Music Tribe non si trovi nelle vostre vicinanze, potete contattare il Music Tribe Authorized Fulfiller per il vostro paese, elencato in "Support" @ musictribe.com. Se la vostra nazione non è elencata, controllate se il problema può essere risolto tramite il nostro "Online Support"che può anche essere trovato sotto "Support" @ musictribe.com. In alternativa, inviate una richiesta di garanzia online su musictribe.com PRIMA di restituire il prodotto. 20 KT10 HP , KT12-HP and KT15-HP Other important information Belangrijke informatie Wana informacja 1. Registreer online. Registreer uw nieuwe Music Tribe-apparatuur direct nadat u deze hebt gekocht door naar musictribe.com te gaan. Door uw aankoop te registreren via ons eenvoudige online formulier, kunnen wij uw reparatieclaims sneller en efficiënter verwerken. Lees ook de voorwaarden van onze garantie, indien van toepassing. 2. Storing. Mocht uw door Music Tribe geautoriseerde wederverkoper niet bij u in de buurt zijn gevestigd, dan kunt u contact opnemen met de door Music Tribe Authorized Fulfiller voor uw land vermeld onder "Support" op musictribe.com. Als uw land niet in de lijst staat, controleer dan of uw probleem kan worden opgelost door onze "Online Support", die u ook kunt vinden onder "Support" op musictribe.com. U kunt ook een online garantieclaim indienen op musictribe.com VOORDAT u het product retourneert. 1. Zarejestrowa online. Zarejestruj swój nowy sprzt Music Tribe zaraz po zakupie na stronie musictribe.com. Zarejestrowanie zakupu za pomoc naszego prostego formularza online pomaga nam szybciej i efektywniej rozpatrywa roszczenia dotyczce naprawy. Przeczytaj równie warunki naszej gwarancji, jeli dotyczy. 2. Awaria. Jeli Twój autoryzowany sprzedawca Music Tribe nie znajduje si w pobliu, moesz skontaktowa si z autoryzowanym dostawc Music Tribe dla swojego kraju, wymienionym w sekcji ,,Wsparcie" na stronie musictribe.com. Jeli Twojego kraju nie ma na licie, sprawd, czy Twój problem moe zosta rozwizany przez nasze ,,Wsparcie online", które mona równie znale w sekcji ,,Wsparcie" na stronie musictribe.com. Alternatywnie, przelij zgloszenie gwarancyjne online na musictribe.com PRZED zwrotem produktu. Viktig information 1. Registrera online. Registrera din nya Music Tribe-utrustning direkt efter att du köpt den genom att besöka musictribe.com. Att registrera ditt köp med vårt enkla onlineformulär hjälper oss att behandla dina reparationsanspråk snabbare och mer effektivt. Läs också villkoren i vår garanti, om tillämpligt. 2. Fel. Om din Music Tribe-auktoriserade återförsäljare inte finns i din närhet kan du kontakta Music Tribe Authorized Fulfiller för ditt land listat under "Support" på musictribe.com. Om ditt land inte är listat, kontrollera om ditt problem kan hanteras av vår "Onlinesupport" som också finns under "Support" på musictribe.com. Alternativt kan du skicka in ett online-garantianspråk på musictribe. com INNAN du returnerar produkten. 1. Music Tribe musictribe.com 2. Music Tribe , Music Tribe , musictribe.com "WHERE TO BUY" Hereby, Music Tribe declares that this product is in compliance with Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC, and this passive product is not applicable to EMC Directive 2014/30/EU, LV Directive 2014/35/EU. Full text of EU DoC is available at https://community.musictribe.com/ EU Representative: Music Tribe Brands DK A/S Address: Gammel Strand 44, DK-1202 København K, Denmark UK Representative: Music Tribe Brands UK Ltd. Address: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom Quick Start Guide 21