Instruction Manual for FloorMuffler models including: Encore Floating Floor, Encore, Floating Floor, Floor
File Info : application/pdf, 1 Pages, 262.46KB
DocumentDocumentit's what's underneath that counts® FLOORMUFFLER® ENCORE Floating Floor Installation Instructions 1 1. Make sure the subfloor is structurally sound, level and is free of dust and debris. 2. Check for protruding nails and/or defects in the subfloor. If installing over concrete, the concrete must be dry with moisture emission rates that do not exceed the floor covering manufacturer's specifications. 2 1. Start in a corner with the tape strip side next to the wall and the overlapping film toward the open room. 2. Install floorMuffler® Encore (film side down) parallel to the wall in the opposite direction that you plan to install the flooring planks. 3. When installing the floorMuffler® Encore, leave at least 2" going up the wall. 3 1. Be sure to unfold the film, extending it 3" from the foam. 2. Roll out the next roll of floorMuffler® Encore in the same manner, making sure that the foam seams are butted together. 3. Be sure to overlap only the moisture barrier lip and not the foam pad. 4 1. Remove the adhesive liner and adhere the foam to the film overlap. 5 1. Install the flooring per manufacturer's instructions. Let's get social floormuf f ler.com 1 800 440 6008