Cage for Insta360 X4

Introduction

Thank you for purchasing SmallRig's product.

Please read this Operation Guide carefully.

Please follow the safety warnings.

Step 1: Mount Camera

The diagram shows the SmallRig cage for the Insta360 X4. A hand is depicted pushing the camera into the cage, with an arrow indicating the direction of insertion. The cage features a 1/4" mounting point.

Step 2: Insert Camera

The diagram illustrates the camera being slid down into the cage. An arrow indicates the downward motion. The camera is shown with its lens and screen.

Step 3: Secure Camera

This step shows how to secure the camera within the cage. A latch or locking mechanism at the top of the cage is being closed over the camera, with arrows indicating the closing motion.

Step 4: Attach Top Accessory

The diagram shows a separate component, likely a top plate or accessory, being placed onto the top of the assembled cage. An arrow indicates the placement.

Step 5: Insert Battery/Panel

This step demonstrates inserting a rectangular component, such as a battery or side panel for the camera, into the side of the cage. Arrows indicate the insertion and closure process.