STRONG 4G+ LTE Router 4G+ROUTER1200UK Installation Guide

1. Insert SIM Card

Locate the SIM card slot on the side of the STRONG 4G+ LTE Router. Carefully insert your SIM card into the slot until it clicks into place. Ensure the SIM card is oriented correctly as indicated by the slot's design.

2. Install Antennas

The router comes with two external antennas. Follow these steps to install them:

Screw each antenna into the corresponding ports on the back of the router (2.1).
Ensure the antennas are securely fastened (2.2).
Adjust the antennas upwards for optimal signal reception (2.3).

3. Connect Power

To power on the router:

Connect the power adapter cable to the router's power input port (3.1).
Plug the power adapter into a standard electrical wall outlet (3.2).
Press the power button on the router to turn it on (3.3).

4. Wait for Connection

Allow a few moments for the router to boot up and establish a network connection. The Wi-Fi indicator light on the front of the router will illuminate when it is ready for use.

Important Note: If your SIM card requires a PIN code, you will need to enter it through the router's web interface, as described in steps 6 and 7, to activate the mobile broadband connection.

5. Connect to the Router

You can connect your device to the router via Wi-Fi or Ethernet.

5a. Connect via Wi-Fi

On your computer or mobile device, open your Wi-Fi settings. You should see two Wi-Fi network names (SSIDs) broadcast by the router:

STRONG_XXXX_2.4GHz
STRONG_XXXX_5GHz

Select one of these networks and enter the Wi-Fi password. The default Wi-Fi name and password, along with other important details, are typically found on a label on the bottom of the router.

Router Label Information Example:

Model: 4G+ROUTER1200UK
Wi-Fi Name: STRONG_XXXX_2.4GHz
Wi-Fi Name: STRONG_XXXX_5GHz
Wi-Fi Password: XXXXXXXXXX
IP Address: 192.168.188.1
Username: admin
Password: XXXXXXXX
Input: 12 V 1.5 A

5b. Connect via Ethernet

Alternatively, connect your computer directly to one of the router's LAN ports using an Ethernet (RJ45) cable.

6. Access the Web Interface

To configure advanced settings or enter a SIM PIN, access the router's web interface:

Open a web browser (e.g., Chrome, Firefox, Edge) on your connected device.
In the address bar, type the router's default IP address: 192.168.188.1 and press Enter.
On the login page, enter the default username and password. These credentials are provided on the router's label (as shown in 6.1 and 6.2). The default username is typically 'admin', and the password will be a series of characters.

	STRONG 4G LTE Router 360: High-Speed Internet Anywhere Discover the STRONG 4G LTE Router 360, offering up to 150 Mbps 4G LTE speeds and 300 Mbps Wi-Fi. Ideal for home, second homes, or mobile use, with easy setup and robust security features. Features 4 Ethernet ports and dual SIM adapters.
	STRONG 4G+ LTE ROUTER 4G+ROUTER1200 Installation Guide This guide provides essential information for setting up your STRONG 4G+ LTE ROUTER 4G+ROUTER1200, including SIM card insertion, antenna connection, power setup, network configuration, and service center contacts.
	STRONG 4G LTE Router 4GROUTER350 Quick Start Guide Get started quickly with the STRONG 4G LTE Router 4GROUTER350. This guide provides step-by-step instructions for setup, Wi-Fi connection, and accessing the router's interface.
	STRONG 4G+ LTE ROUTER 1200 Quick Installation Guide Step-by-step guide to setting up your STRONG 4G+ LTE ROUTER 1200, including SIM card insertion, antenna connection, power, and network configuration. Find Wi-Fi details and service center contacts.
	STRONG 4G Router 300M: Quick Start Guide and Setup Instructions Get started with your STRONG 4G Router 300M. This guide provides step-by-step instructions for installation, setup, and accessing the web interface for your mobile LTE internet connection.
	STRONG 4G LTE Router 4GROUTER350M Quick Start Guide This guide provides instructions for setting up and installing the STRONG 4G LTE Router 4GROUTER350M. Learn how to insert the SIM card, connect the power adapter, and access the router's interface for network configuration.
	STRONG 4G+ LTE Router 1200 Installation Guide This document provides installation instructions for the STRONG 4G+ LTE Router 1200, detailing setup, Wi-Fi connection, and basic configuration.
	STRONG 4GROUTER300MUK 4G LTE Router Installation and Setup Guide Concise guide to installing and setting up the STRONG 4GROUTER300MUK 4G LTE Router, enabling internet sharing with any device. Includes SIM card insertion, antenna setup, power connection, and initial login.

STRONG 4G+ LTE Router 4G+ROUTER1200UK