Instruction Manual for SAGE LU MEI models including: R11, R12, Ultrathin Touch Slide RF Remote Controller, Touch Slide RF Remote Controller, RF Remote Controller, Remote Controller, R11, Controller
LEDlife rWave slim touch dæmper fjernbetjening - 1 zone, batteri, inkl. holder
LEDlife rWave slim touch dimmer fjernbetjening - 1 sone, batteri, inkl. holder - LEDLyskilder.no
Ultrathin Touch Slide RF Remote Controller Model No.: R11,R12,R13 Touch color slide/1-3 color/Wireless remote 30m distance/CR2032 batter y/Magnet stuck fix R11,R12,R13 Ultrathin Touch Slide RF Remote Controller Mechanical Structures and Installations 36.00 mm 11.00 mm 139.00 mm 53.50 mm R11 1 Zone Dimming R12 1 Zone CCT R13 1 Zone RGB Features Apply to single color, dual color or RGB LED controller. Ultra sensitive color adjustment touch slide. Each remote can match one or more receiver. CR2032 battery powered. Operate with LED indicator light. Magnet on the back which can be easily stuck on back holder or any metal surfaces. Technical Parameters LVD RED Input and Output Output signal Working voltage Working current Standby current Standby time Remote distance Environment Operation temperature IP rating RF(2.4GHz) 3VDC(CR2032) 5mA 10A 1 year 30m(Barrier-free space) Ta: -30 OC ~ +55 OC IP20 Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,LVD,RED Warranty Warranty Weight Net weight Gross weight 5 years 24g 64g User Manual Ver 1.1.0 CR2032 Battery Note: Before the first use, please remove the protective film on the battery. Back holder with magnet To fix the remote, three options are offered for selection: Option 1: stuck the remote on any metal surfaces directly. Option 2: fix the remote' back holder on the wall with two screws. Option 3: adhere the remote' back holder to the wall with paster. Match Remote Control (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Match: Short press match key, immediately press on/off key on the remote. The LED indicator fast flash a few times means match is successful. Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted. Use Power Restart Match: Switch off the power, then switch on power, repeat again. Immediately short press on/off key 3 times on the remote. The light blinks 3 times means match is successful. Delete: Switch off the power, then switch on power, repeat again. Immediately short press on/off key 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. Page 1 Key function R11 1 zone dimming remote LED indicator On/Off 100% Bright touch slide 50% 1% R12 1 zone CCT remote LED indicator On/Off Color touch slide User Manual Ver 1.1.0 Short press to turn on or turn off light. Long press 1-6s to adjust brightness. WW 100% CW 0% WW 50% CW 50% WW 0% CW 100% R13 1 zone RGB remote LED indicator On/Off R11,R12,R13 Ultrathin Touch Slide RF Remote Controller Short press to turn on or turn off light. Long press 1-6s to adjust brightness. Fast press 2 times to get white color (RGB mixed). R 100% Color touch slide G 100% B 100% Safety information 1. Read all instructions carefully before you begin this installation. 2. When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery. 3. If no response from the receiver, please re-match the remote. 4. Gently handle remote, beware of falling. 5. For indoor and dry location use only. Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6