Packing List
- Charging Case x1
- Earphones
- Charging Cable x1
- Ear Tips x6
- Instruction Manual x1
- Storage Bag x1
Overview
Diagram showing the charging case and earphones with labeled components:
- Reset Button
- LED Light Indicators (on case and earphones)
- Multifunction Sensor (MFS) (on earphones)
- Microphone (on earphones)
- USB Type C Charging Port (on case)
Charging
Notes:
- Ensure earphones and charging case are fully charged before first use.
- Keep earphones and charging case clean and dry during charging.
Charging Steps:
- Place earphones into the charging case. They will power off automatically when the lid is closed. The LED light indicates power capacity when the lid is opened or closed.
- Connect the charging case to a power source using the USB Type C charging cable.
- Note: The USB Type C cable must have a 10mm male termination.
Power On/Off
Automatic:
- Earphones power on automatically when the charging lid is opened.
- Earphones power off automatically when placed back in the charging case and the lid is closed.
Manual:
- To manually turn earphones on, hold the Multifunction Sensor (MFS) for 3 seconds.
- To manually turn earphones off, hold the MFS for 7 seconds. Both earphones will power off.
LED Light Indicators for Power:
- 0-25%: Blue LED light flashes.
- 25-50%: Blue LED light is solid.
- 50-90%: White LED light flashes.
- 90-100%: White LED light is solid.
Fit
- Select an ear tip size suitable for your ear and slide it onto the tip of the earphone.
- Insert the earphones into your ear canals and adjust them for a comfortable fit, ensuring a secure seal.
Pairing/Unpairing Procedure
The Noble Fokus Triumph earphones need to be paired to your device before use. Once paired, they will connect automatically each time they are activated.
Pairing
- Open the lid of the charging case. The earphones will power on automatically and enter pairing mode, indicated by a flashing blue LED light.
- Enable Bluetooth on your smartphone and search for "Noble Fokus Triumph" in the available Bluetooth devices. Select "Noble Fokus Triumph" to initiate pairing. You will hear "connected", and the earphones are ready for use.
Pairing a New Device
- Open the lid of your charging case. The earphones will power on automatically and connect to your currently paired device.
- To unpair the earphones from the last connected smartphone, select "disconnect" or delete "Noble Fokus Triumph" from your smartphone's Bluetooth device list.
- Once disconnected, the earphones will automatically enter pairing mode, with blue and white indicator lights flashing alternately.
- Enable Bluetooth on your new device, search for "Noble Fokus Triumph" in the available Bluetooth devices, and select it to initiate pairing. You will hear "connected", and the earphones are ready for use.
Operation
Controls
| Action | Control | Function |
|---|---|---|
| Play/Pause | Single Click MFS (L/R) | Play/Pause music or answer/hang up calls |
| Volume Up | Triple Click MFS (L) | Increase volume |
| Volume Down | Double Click MFS (L) | Decrease volume |
| Previous Track | Triple Click MFS (R) | Go to the previous track |
| Next Track | Double Click MFS (R) | Go to the next track |
| Answer Call/Hang Up | Single Click MFS (L/R) | Answer or end a call |
| Reject Call | Press MFS for 2 seconds (L/R) | Reject an incoming call |
| Voice Assistant | Press MFS for 3 seconds (R) | Activate Siri or Google Assistant |
| Ambient Mode | Press MFS for 3 seconds (L) | Activate or deactivate Ambient Mode |
LED Indicator Status (Usage Scenario)
| Scenario | LED Indicator Status |
|---|---|
| Pairing | Blue LED light flashes for one second. |
| Pairing succeeds | Blue LED light flashes for one second. |
| Playing music or on calling | Blue LED light flashes. |
| Low Power | Blue LED light flashes every 7 seconds. |
| Earphones put in charger case | LED light off. |
| Earphones seated in charger case | Blue LED light flashes twice every 8 seconds. |
| Case is charging | Blue LED light is solid. |
| Case fully charged | White LED light is solid. |
Additional Notes:
- Single Pairing Mode: Place one earphone back in the charging case; the other earphone will continue to work independently.
- One earphone will continue to function even if the other earphone powers off.
- Pairing after being taken out of range: The earphones will automatically re-pair to the smartphone within 3 minutes if they are brought close to the smartphone again. If they are not brought within range within three minutes, the earphones will automatically power off.
Ambient Mode
Ambient Mode allows you to hear your surroundings without removing the earphones.
- Ambient Mode On: Press and hold the left earbud touch sensor for 3 seconds. You will hear the voice prompt "Ambient Mode On", activating the external sound capturing function.
- Ambient Mode Off: Press and hold the left earbud touch sensor for 3 seconds. You will hear the voice prompt "Ambient Mode Off".
The ambient mode can be turned off and on by pressing the LEFT earbud touch sensor for 3 seconds.
Reset Procedure
Use this procedure if the earphones cannot pair to each other or to your Bluetooth devices.
- Place both earphones into the charging case.
- Press and hold the reset button for 5 seconds until the blue LED lights on both earphones flash quickly. All previously paired devices will be cleared. The reset process is completed.
If only one earphone is accidentally reset, both earphones will need to be reset to function as a pair again.
Specifications
| Product Model | Noble Fokus Triumph |
| Bluetooth Version | V 5.3 |
| Bluetooth Profile | A2DP, AVRCP, HFP, HSP |
| Audio Codec | SBC, AAC, Aptx Adaptive, Qss |
| Driver size | φ6.5mm 200±4.5(15%) |
| Frequency response | 20HZ~20KHZ |
| Connection Distance | ≥10m |
| Earphone Battery Capacity | 45mAh |
| Charging Case Battery Capacity | 400mAh |
| Play time | 7H (50% volume), Talk time: 4H |
| Charging time | Earbuds: 1.5 hours; Charger case: 2 hours |
| Charging Port | Type C |
| Power input | 5V 1A |
Declarations and Warnings
- Disconnect previous devices before pairing a new device.
- WARNING! Long-term exposure to high noise volumes may cause permanent hearing loss.
- Do not use the Noble Fokus Triumph earphones in locations prohibiting the use of electronic equipment.
- Consult your physician prior to using your Noble Fokus Triumph earphones if you have a pacemaker or other electrical medical devices.
- This package contains small parts, which may pose a hazard to small children.
- Do not disassemble the Noble Fokus Triumph as it contains lithium batteries, and disassembly could result in electric shock or fire or serious injury.
- Any disassembly or attempt to replace or repair the Noble Fokus Triumph by an unauthorized person will void the warranty.
- This product is not designed for use in water or wet environments. Keep product away from water and liquids. Failure to do so will void any warranty and may cause permanent damage to the product.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
