Instruction Manual for Kynett models including: Flywheel Wall or Rack Adjust connector, Flywheel, Wall or Rack Adjust connector, or Rack Adjust connector, Rack Adjust connector, Adjust connector, connector

Kynett - Mike

here

Wall Adjust for Kynett FIT Flywheel – Kynett - Flywheel Training improving our products. This time, we’ve upgraded the Wall Adjust with a specially protected design connector that easily joins two parts together. You can view the manual for the Wall Adjust Connector by clicking

Rack Adjust for Kynett HOME Flywheel – Kynett - Flywheel Training

Wall Adjust for Kynett ONE Flywheel – Kynett - Flywheel Training

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 153.71KB

Document Document

Manual for connector (Wall- or Rack Adjust)
The two parts for the Wall - / Rack Adjust
1. How to mount the wall-adjust together.
2. Slide the connector in the wall adjust.
3. Slide the lower part of the wall adjust over the connector. Make sure the holes are aligned.

4. There are 4 bolts and 1 hex key included.
5. Tighten the bolts securely.
7. Tighten each screw one by one until there is no more play in the tubes. If you have a torque wrench, tightening torque approximately 15 Nm, 11 ft-lb
6. Check that everything is securely fastened. And it's ready to use.