KLING FREITAG NOMOS XLC Performance Cardioid Subwoofer User Manual

User Manual for KLING FREITAG models including: NOMOS XLC Performance Cardioid Subwoofer, NOMOS XLC, Performance Cardioid Subwoofer, Cardioid Subwoofer, Subwoofer

K&F NOMOS XLC - Kling & Freitag Sound Systems

K&F NOMOS XLC Important Information, Please Read Before Use! KLING & FREITAG GmbH Wohlenbergstrasse 5 D-30179 Hannover TEL 49 (0) 511 96 99 70 FAX 49 (0) 511 67 37 94

Kling & Freitag Sound Systems

Manual

NOMOS XLC - Kling & Freitag Sound Systems

File Info : application/pdf, 22 Pages, 1.63MB

man nomos-xlc en

K&F NOMOS XLC

User's Manual
Translation of the original instructions
Important Information, Please Read Before Use!

Version 4.6 Released: 15.11.2017

KLING & FREITAG GmbH Wohlenbergstrasse 5 D-30179 Hannover TEL +49 (0) 511 96 99 70 FAX +49 (0) 511 67 37 94 www.kling-freitag.de

User's Manual
Table of contents

K&F NOMOS XLC

Introduction

1.1

Icons Used

1.2

About this Manual

Product Description

2.1

Items Included

2.2

Components

2.3

System Requirements

Safety Instructions

3.1

Safety Instructions for Stacked Setups

3.2

Protecting the Speakers / Operating Safety

NOMOS XLC combined with other K&F tops.

Stacking the Subwoofers

Cardioid Arrays with Controller CD 44

6.1

Setup instructions for a cardioid array

6.2

LSBlocks for cardioid useNOMOS XLC

Fuse in the NOMOS XLC

7.1

Replacing the Fuses

Connection

8.1

Terminal assignment

8.2

Cabling a K&F System Rack

8.3

Connecting the NOMOS XLC

Dimensions NOMOS XLC

Measuring Diagrams

Technical Specifications

EC Declaration of Conformity

Accessories

Transportation and Storage

Disposal

15.1

Regulations for Disposal

15.1.1

Germany

15.1.2

EU, Norway, Iceland, and Liechtenstein

15.1.3

All Other Countries

Version 4.6

Page 3 of 22

Warning Caution

User's Manual

K&F NOMOS XLC

1. Introduction
Thank you for purchasing a KLING & FREITAG product. To guarantee a trouble-free operating of the equipment and to allow your KLING & FREITAG NOMOS XLC system to achieve its full potential read the user's manual carefully before use. This item is a quality accessory for the NOMOS XLC speaker system. As the owner of a NOMOS XLC loudspeaker, you now have a versatile and highly professional tool which, when operated properly, is a true pleasure to use.
1.1 Icons Used
This icon indicates a risk of injury or death. Not following these instructions may result in serious health problems including potentially fatal injuries.

This icon indicates a possibly dangerous situation. Not following these instructions may cause minor injuries or damage.

This icon marks instructions for proper use of the described products. Not following these instructions may cause malfunctions or damage.

1.2 About this Manual
User's Manual K&F NOMOS XLC.
© KLING & FREITAG GmbH, 2009, all rights reserved.
All specifications regarding the features of the described products and applicable safety guidelines provided in this manual are based on information available at the time of publishing.
We assume no responsibility for technical specifications, dimensions, weights, and properties.
All information in this manual is subject to change without notice.
To ensure safe operation, all persons using the speaker system must have access to these user's manual and all other relevant material during installation. Don't set up or operate the speaker system before you have carefully read and fully understood this user's manual. Keep the user's manual readily available on site at all times.
All KLING & FREITAG manuals are originally authored in German.
KLING & FREITAG spare manuals are separately available for order or can be downloaded from our website: www.kling-freitag.de.

info@kling-freitag.de KLING & FREITAG GMBH, Wohlenbergstr. 5, D-30179 Hannover Phone +49 511 96 99 70, fax +49 511 67 37 94 (other countries)

Version 4.6

Page 4 of 22

User's Manual

K&F NOMOS XLC

2. Product Description
2.1 Items Included
· Cardioid Bass Speaker NOMOS XLC · (1x) User manual
2.2 Components

1. Stacking grooves (8x) , adjacent: plastic glider 2. Butterfly handles (8x) 3. locking profile 4. speaker enclosure 5. front grille with acoustic foam 6. rear grille with acoustic foam 7. SpeakOn connector 8. transport castors, 100 mm, permanently installed 9. Plastic glider (8x) , adjacent: stacking grooves

Version 4.6

Page 5 of 22

User's Manual
2.3 System Requirements
Lab.gruppen IPD 2400
or
K&F PLM+ 20k44 (SystemAmp, ProRental) K&F PLM+ 12k44 (SystemAmp, ProRental)
with K&F Connector Panel CP+ Terminalpanel (optional)
or K&F D200:4 (SystemAmp, InstallSound) K&F D120:4 (SystemAmp, InstallSound) K&F D80:4 (SystemAmp, InstallSound)
or K&F SystemRack

K&F NOMOS XLC

Warning

3. Safety Instructions
For commercial use as specified in this document only!
To prevent personal injury and damage, be sure to securely place or suspend the speaker as specified in the locally applicable standards.
The information described here does not relieve the user of the duty to follow the given safety requirements and legal regulations.
The persons in charge with putting up the speaker are responsible for safe setup and use and must guarantee it.
In mobile and stationary installations, always use installation parts supplied by KLING & FREITAG.
Unless otherwise stated, use KLING & FREITAG original parts only. Never use other parts (in particular, parts not made by KLING & FREITAG).
Be sure to always visually inspect all safety-related speaker and accessory components before use. In fixed installations, check the speaker for signs of wear at regular intervals. If there are signs of wear, cracks, or deformation, etc., replace the affected parts immediately.

Version 4.6

Page 6 of 22

Caution Warning

User's Manual

K&F NOMOS XLC

Run the cables in a way that nobody can trip over them. At least 2 people are necessary to carry the speaker.
Preventing Hearing Damage Keep your distance from operating speakers. Even loudness levels of approx. 90 dB - that you subjectively judge as being low - can lead to hearing damage.

3.1 Safety Instructions for Stacked Setups
Falling speakers pose the threat of fatal injuries to people near them!
Be sure to follow the relevant national specifications, norms, and safety regulations.
Always make sure that a sufficient safety level is still given, even when outside forces have an additional impact on the stacked speakers. Before setup, carefully ascertain if there are any possible outside forces that could result in the system falling over. (Slant of the ground / the bearing capacity of the ground / wind / person or vehicle impact, etc.). A technical expert who is responsible for the setup must evaluate and determine necessary measures (including calculating the statics). If necessary, obtain expert proof of stability.
Stacked systems may not fall over even if they are inclined by 15° in each direction. If this requirement is not fulfilled, then it is necessary to take steps to achieve compliance. Possible measures include strapping it to an appropriate base structure or fastening it using safety straps. A planned tilt of the loudspeakers ist not permissible. In calculations, the tilted setup serves the purpose of levelling out unevenness.
With the set-up systems for which you cannot verify the structural safety without safeguards, you must secure them to prevent sliding or tipping in order to provide proof of this safety. To secure the system from tipping over, use water tanks or floor bolts. Other possible measures include strapping it to a suitable substructure or tying it using safety straps.
For outdoor and trade fair venues in which wind loads must be considered, additional proof of stability is necessary.
Make sure that the stacking feet of subwoofers stacked on top of one another are securely positioned in the grooves of the lower speaker.
If you place a top speaker on a NOMOS XLC you must always strap the speakers to one another and secure them from falling over.

3.2 Protecting the Speakers / Operating Safety
NOMOS XLC speakers may only be used in combination with a K&F SystemAmp/SystemRack. System Requirements for Use
In general, audio signals must not be overdriven. This may be caused by mixing consoles, equalizers, effect equipment, etc. and should be indicated on this equipment. When a power amplifier is overloaded at the output (clipping), then the amplifier activates a clipping warning signal. In any case, the signal must be reduced as soon as it sounds unnaturally distorted.
The following signals may damage the speakers:
· permanent high-level signals with high frequency and continuous noise from feedback,
· permanently distorted high-level signals,
· noises, which occur when the amplifier is on while equipment is being connected, disconnected or switched on.
Do not install devices in any of the following places:
· where the devices are permanently exposed to direct sunlight.
· where the devices are exposed to high moisture or rain.
· where the devices are exposed to strong vibrations and dust.

Version 4.6

Page 7 of 22

User's Manual

K&F NOMOS XLC

· where low air circulation (convection) prevails. · that have a small distance to a wall.
Damage caused by the speakers' magnetic fields Speakers are permanently surrounded by a magnetic field, even when they are not connected. Therefore, during transport and placement of the speakers, it is important to ensure that there is always approx. 1 m between the speakers and magnetic data media and computer/video monitors.
For damage caused by · overloading the speakers or · using the speakers without K&F SystemAmp/SystemRack
we do not assume warranty and excludes liability for possible consequential damage.

4. NOMOS XLC combined with other K&F tops.
The NOMOS XLC can be combined with K&F top speakers using the controller K&F CD 44.
· To do so, select the desired LS blocks for the top in the Controller CD 44 or systemamp TOPAS, and combine these with the desired LS block for the NOMOS XLC.
In the respective Hardware Manuals, you will find detailed descriptions about connecting the SEQUENZA 10 speakers and the settings necessary on the System Controller CD 44. SONA SUB

Version 4.6

Page 8 of 22

User's Manual

5. Stacking the Subwoofers

1. Securely place the bottom subwoofer onto a level surface.

Stack the subwoofers on top of one

another.

Make sure that the stacking feet of subwoofers stacked on top of one another are securely positioned in the grooves of the lower speaker.

K&F NOMOS XLC

Warning

You must additionally secure vertically standing stacked NOMOS XLC systems from falling since the structural safety is not guaranteed, otherwise.

6. Cardioid Arrays with Controller CD 44
The subwoofer NOMOS XLC is a cardioid loudspeaker. A cardioid array results in an increase of sound pressure towards the front because of the rear-facing subwoofer. In the rear area (cardioid) or in the lateral side area (hypercardioid), on the other hand, the sound pressure is clearly reduced. With this, you achieve · less unwanted sound on the stage · low feedback · simplified miking · improved room acoustics with fewer reflections from the rear and side walls, or when
flown from the ceiling · simplified adherence of sound emission limits and therefore less noise disturbance for
nearby residential areas during open air events.
6.1 Setup instructions for a cardioid array
In order to implement a cardioid or hyper-cardioid setup, the fronts of the speakers must face the audience.

Version 4.6

Page 9 of 22

User's Manual

K&F NOMOS XLC

When cardioid speakers are put on the floor, ensure that there is always a distance of at least 40 cm between and over the speakers.
We recommend a safe distance to a possible obstruction of at least one meter (1 m).
Distance at standing speakers:

40 cm [1,3 ft]

Distance at lying speakers:

40 cm [1,3 ft]

Version 4.6

Page 10 of 22

User's Manual

K&F NOMOS XLC

6.2 LSBlocks for cardioid useNOMOS XLC
The following cardioid or hypercardioid setups are available in the K&F CD 44. All setups with a cutoff frequency other than 60 Hz have a cutoff frequency of 100 Hz.

Operating mode

Chassis

LSBlocks (NOMOS LT)

'Cardioid'

front

NOMOS LT C-F

rear

NOMOS LT C-R

'Hypercardioid'

front

NOMOS LT H-F

rear

NOMOS LT H-R

'Infrabass Cardioid'

front

NOMOS LT C-F60Hz

rear

NOMOS LT C-R60Hz

'Infrabass Hypercardioid'

Front

NOMOS LT H-F60Hz

Rear

NOMOS LT H-R60Hz

7. Fuse in the NOMOS XLC
To increase the operating safety of the NOMOS XLC, the subwoofers are equipped with fuses at the signal input. These fuses reduce the risk of consequential damage resulting from a short circuit (i.e. charred cables / connectors / fire damage).

7.1 Replacing the Fuses
The fuse holder is behind the rear chassis. Replace the fuse with the following original fuse only: Bussmann S 506-8A, T 250 V

Version 4.6

Page 11 of 22

User's Manual

K&F NOMOS XLC

8. Connection
The operating safety and the highest-possible performance is only guaranteed in conjunction with the K&F Topas or K&F SystemRack.

8.1 Terminal assignment

+ +
+

FRONT SPEAKERS
-

-
REAR SPEAKER

1+ 1- 2+ 2-

SPEAKON CONNECTORS

Version 4.6

Page 12 of 22

User's Manual
8.2 Cabling a K&F System Rack

K&F NOMOS XLC

Version 4.6

Page 13 of 22

User's Manual

K&F NOMOS XLC

8.3 Connecting the NOMOS XLC
The following connecting diagram shows an example with the K&F CD 44 Routing '1 in 4 out'.
A maximum of 3 NOMOS XLC subwoofers can be driven by one K&F SystemRack. If you want to use 3 NOMOS XLC subwoofers with a K&F SystemRack you will need the Break Out Box 'K&F BOB-C' available as an accessory.

Version 4.6

Page 14 of 22

User's Manual
9. Dimensions NOMOS XLC
Weight: 95.0 kg

K&F NOMOS XLC

Version 4.6

Page 15 of 22

User's Manual

K&F NOMOS XLC

10. Measuring Diagrams

Polar Patterns

Cardioid

0°

330°

30°

300°

-12 dB

-24 dB

60°

330° 300°

0°
-12 dB -24 dB

30° 60°

270°

40 Hz

90°

50 Hz

63 Hz

270°

80 Hz

90°

100 Hz

125 Hz

240°

210°

180°

Hypercardioid
330°

0°
-12 dB -24 dB

120° 150°
30° 60°

240° 210°

180°

120° 150°

330° 300°

0°
-12 dB -24 dB

30° 60°

270°

40 Hz

90°

50 Hz

63 Hz

270°

80 Hz

90°

100 Hz

125 Hz

240°

210°

180°

Frequency response

120° 150°

240° 210°

180°

120° 150°

Version 4.6

Page 16 of 22

User's Manual

K&F NOMOS XLC

11. Technical Specifications

NOMOS XLC

Concept

Bass reflex system

Operated with

K&F PLM+ Serie, K&F D-Serie, K&F SystemRack, K&F TOPAS

Lower cut-off frequency

28 Hz (-10 dB)/33 Hz (-3 dB)

Coverage

Cardioid/Hypercardiod

Nominal power handling

1,000 watts (front) 500 watts (rear)

program

2,000 Watt (front) 1,000 Watt (rear)

peak

4,000 watts (front) 2,000 watts (rear)

Max. SPL (1 m)

139 dB (SPL Peak/1 m/half space)

Impedance nominal

4 Ohm (front) 8 Ohm (rear)

loudspeaker/channel

see matrix

Components

3 x 18" long excursion chassis, 100 mm voice coil with double centring, internal and external ventilation, demodulation ring for minimal distortion

Connection

2 x Speakon® 4-pin NLT4MP front speakers: 1+ / 1rear speaker: 2+ / 2IN parallel to OUT

Enclosure Design

Frame reinforced enclosure, 15 mm multiplex with highly resilient Polyurea synthetic black coating, 8 ergonomical butterfly handles, 8 nonabrasive plastic sliders, 8 stacking grooves for save stacking of identical enclosures, 4 x 100 mm transport castors, 2 locking profiles for transport optional transport cover, ballproof steel grille with exchangeable black acoustic foam

Dimensions (H x W x D)

1.200 x 600 x 903 mm

Weight

95.0 kg/Transport Cover: 8.7 kg (optional accessorie)

1) Pink noise 40 250 Hz, 2 h; 2) as 1) but with 50% duty cycle Measurings taken with the K&F SystemRack. The K&F SystemRack is required for operation of the K&F NOMOS XLC.

Version 4.6

Page 17 of 22

User's Manual

K&F NOMOS XLC

12. EC Declaration of Conformity

Manufacturer:

Kling & Freitag GmbH Junkersstraße 14
30179 Hannover
Germany

Authorized representative for the compilation of the technical documents:

Kling & Freitag GmbH Abt. Entwicklung 049 (0)511 96997-50 Germany

Product:

Loudspeakersystem NOMOS XLC

We declare that the designated product is in conformity with the protection requirements imposed by the following EU directives:
· 2014/35/EU, Niederspannungsrichtlinie · 2014/30/EU, Electromagnetic Compatibility · 2011/65/EU, RoHS II

Conformance of the products with the requirements is approved by compliance with the following harmonized European standards:
· DIN EN/ISO 60065 : 2002/A12:2011 · Eurocode 1/DIN EN 1991-1-1 : 12/2010 · Eurocode 3/DIN EN 1993-1-1 : 12/2010 · Eurocode 9/DIN EN 1999-1-1 : 12/2010 · EN 55103+1 : 2009+A1 : 2012 · EN 55103-2 : 2009

National regulations: · DGUV, Regulation 15 (BGV C1)

Hannover, 9th November 2017

Jürgen Freitag (Managing Director / CEO)

Version 4.6

Page 18 of 22

User's Manual
13. Accessories
Protective Cover NOMOS XLC
Transport Cover NOMOS XLC
K&F BOB-C: Speaker signal distributor, 1 x 8-pin into 3 x 4-pin. For operations of 3 x NOMOS XLC with a K&F SystemRack.

K&F NOMOS XLC

Version 4.6

Page 19 of 22

User's Manual

K&F NOMOS XLC

14. Transportation and Storage
The housing of the speaker is protected against short-term moisture by a coating. despite, be sure to store, transport, and use the accessories in dry environments only. The NOMOS XLC System is not designed for long-term use in a corrosive environment.
Make sure that the system is adequately ventilated during longer storage periods so any residual moisture can escape from the equipment.
Furthermore, you should ensure that the NOMOS XLC System is protected from mechanical strain to prevent possible damage.
We recommend using the optional soft cover.
15. Disposal
15.1 Regulations for Disposal
15.1.1 Germany
Don't dispose of waste electrical equipment through household waste.
Don't deliver it to official recycling points either.
All KLING & FREITAG products are plain business-to-business (B2B) products. Therefore, KLING & FREITAG GmbH is exclusively responsible for disposing of all KLING & FREITAG waste equipment marked with a garbage-can icon. Call the below phone number when you have a KLING & FREITAG product (marked with the garbage-can icon) for disposal. We will offer you a straightforward and professional disposal at no cost.
KLING & FREITAG equipment with no such icon was sold before 24 March 2006; in that case, the owner is legally responsible for disposal. We will, however, gladly assist you by naming appropriate ways of disposal.
For further disposal information of KLING & FREITAG waste products, call +49 (0)511-96 99 7-0
Background information: The Electrical and Electronic Equipment and Appliances Act (ElektroG) is the German implementation of the European (EU) Waste Electrical and Electronic Equipment Directive (WEEE, 2002/96/EC).
Therefore, starting on 24 March 2006, KLING & FREITAG GmbH has marked all products subject to the WEEE that are distributed in Germany with an icon showing a crossed-out garbage can with a white bar below it. The icon indicates that the equipment was distributed on or after 24 March 2006 and must not be disposed of through household waste.
KLING & FREITAG GmbH is legally registered as a manufacturer with the German wasteequipment registration authority (EAR). The WEEE registration number is: DE64110372.
We substantiated towards the EAR that our products are for B2B trade only.
15.1.2 EU, Norway, Iceland, and Liechtenstein
Don't dispose of waste electrical equipment through household waste.
Starting on 13 August 2005, KLING & FREITAG GMBH has marked all products subject to the WEEE directive that are distributed in any member state of the European Union (except Germany), Norway, Iceland, or Liechtenstein with an icon showing a crossed-out garbage can with a white bar below it. The icon indicates that the equipment was distributed on or after 13 August 2005 and must not be disposed of through household waste.
Unfortunately, the European WEEE directive was implemented in different national legislation in the EU member states, making it impossible to offer a consistent disposal solution throughout Europe.
The local distributor (sales partner) in the respective country is responsible for complying with the applicable legislation.

Version 4.6

Page 20 of 22

User's Manual

K&F NOMOS XLC

Contact your retailer or the local authorities for information on the regulations applicable in any EU member state (except Germany).

15.1.3 All Other Countries
Contact your retailer or the local authorities for information on the regulations applicable in any country not listed above.

Version 4.6

Page 21 of 22

User's Manual

K&F NOMOS XLC

INDEX
· Accessories................................................................................................................................... 18 · Assignment.................................................................................................................................. 12 · Cardioid..........................................................................................................................................9 · Combination.................................................................................................................................. 8 · Components...................................................................................................................................5 · Connection..............................................................................................................................12,14 · Dimensions...................................................................................................................................15 · Disposal........................................................................................................................................ 20 · EC Declaration of Conformity.................................................................................................... 18 · Fuse...............................................................................................................................................11 · InstallSound................................................................................................................................... 6 · Items Included............................................................................................................................... 5 · Measuring Diagrams................................................................................................................... 16 · Product Description.......................................................................................................................5 · ProRental........................................................................................................................................6 · Safety Instructions......................................................................................................................... 6 · Stacking..........................................................................................................................................9 · Storage......................................................................................................................................... 20 · SystemAmp.................................................................................................................................... 6 · SystemRack.....................................................................................................................................6 · System Requirements.................................................................................................................... 6 · Technical Specifications...............................................................................................................17 · Transportation............................................................................................................................. 20 · Wiring...........................................................................................................................................13

Version 4.6

Page 22 of 22

References

Apache FOP Version 1.1rc1 Apache FOP Version 1.1rc1