AlorAir Sentinel HD55 Wiring Diagram
Power Input
The unit is powered by a 115VAC/60HZ source. The power input includes Line (L), Neutral (N), and Ground (⏚) connections, protected by a fuse.
Main Components and Connections
- Compressor: Connected via RC and R terminals, with a protector and capacitor (RC).
- Pump: Connected to the DRAIN terminal.
- Fan: Connected to the FAN terminal, with a capacitor (RC).
- Transformer: Provides power conversion for internal components.
- PCB (Printed Circuit Board): Labeled with connections A1-A6 and a network connection.
- Circuit: Includes connections for NO (Normally Open) and COM (Common) terminals, likely for control or safety switches.
Sensors and Display
- Water Level Sensors: Two sensors, WL and WH, are connected to monitor water levels.
- Temperature Sensor (RT): Measures ambient temperature.
- Humidity Sensor (RH): Measures ambient humidity.
- Display: Connects to the main PCB for showing unit status and readings.
Terminal Designations
Key terminal connections include:
- N1, N2: Likely neutral connections.
- FAN: Fan connection.
- DRAIN: Pump drain connection.
- WL, WH: Water level sensor connections.
- RT: Temperature sensor connection.
- RH: Humidity sensor connection.
- A1-A6: PCB terminal block.
